> > How can I make sure this is the case?
>
> ath10k prints lots of information to dmesg after it has initialised the
> device, so check that. You should see the firmware version and what api
> is used (the number N from firmware-N.bin).
Ok, I have checked and it is:
[9.883661] ath10k_pci
Anil Duggirala writes:
>> > I don't have a QCA6174 hw3.0 but I would guess that ath10k loaded the
>> > firmware-4.bin after it failed to load the firmware-5.bin.
>
> How can I make sure this is the case?
ath10k prints lots of information to dmesg after it has initialised the
device, so check
> > I don't have a QCA6174 hw3.0 but I would guess that ath10k loaded the
> > firmware-4.bin after it failed to load the firmware-5.bin.
How can I make sure this is the case? I have had a couple of issues with my
bluetooth, how can I test it?
thanks very much,
> It was introduced in v4.18 so once you upgrade the kernel to v4.18 or
> later you should not see the warnings anymore.
I see that I am running kernel 4.9.0-8. It may be quite some time before I get
to 4.18 right?
thanks,
___
ath10k mailing list
Sven Eckelmann writes:
> On Freitag, 16. November 2018 08:38:51 CET Anil Duggirala wrote:
>> hello,
>> I am getting this message at boot.
>>
>> [ 10.678576] ath10k_pci :03:00.0: firmware: failed to load
>> ath10k/pre-cal-pci-:03:00.0.bin (-2)
>> [ 10.678631] ath10k_pci :03:00.0:
On Freitag, 16. November 2018 08:38:51 CET Anil Duggirala wrote:
> hello,
> I am getting this message at boot.
>
> [ 10.678576] ath10k_pci :03:00.0: firmware: failed to load
> ath10k/pre-cal-pci-:03:00.0.bin (-2)
> [ 10.678631] ath10k_pci :03:00.0: Direct firmware load for
>
hello,
I am getting this message at boot.
[ 10.678576] ath10k_pci :03:00.0: firmware: failed to load
ath10k/pre-cal-pci-:03:00.0.bin (-2)
[ 10.678631] ath10k_pci :03:00.0: Direct firmware load for
ath10k/pre-cal-pci-:03:00.0.bin failed with error -2
[ 10.678655] ath10k_pci