+ ath10k list Dmitry Baryshkov <dmitry.barysh...@linaro.org> writes:
> On 19/07/2022 00:30, Caleb Connolly wrote: > >> From: Amit Pundir <amit.pun...@linaro.org> >> >> This adds an initial dts for the Blueline (Pixel 3). Supported >> functionality includes display, Debug UART, UFS, USB-C (peripheral), WiFi, >> Bluetooth and modem. >> >> Bootloader compatible board and msm IDs are needed for the kernel to boot >> with Pixel3 bootloader, so those are added. >> >> GPIOs 0 through 3 and 81 through 84 are configured to not be accessible >> from the application CPUs, so we mark them as reserved to allow the Pixel 3 >> to boot. >> >> The reserved-memory locations where obtained from downstream using >> kernel logs: >> https://gist.github.com/calebccff/090d10bfac3cb9e9bd98dda30b054c96 >> >> The rmtfs region is allocated with UIO, making it technically "dynamic". >> It's address and size can be read from sysfs: >> >> blueline:/ # cat /sys/class/uio/uio0/name >> rmtfs >> at /sys/class/uio/uio0/maps/map0/addr >> 0x00000000f2701000 >> blueline:/ # cat /sys/class/uio/uio0/maps/map0/size >> 0x0000000000200000 >> >> Like the OnePlus 6, it needs 1kB reserved on either side of the rmtfs >> memory to workaround some XPU bug which would otherwise cause erroneous >> XPU violations when accessing the rmtfs_mem region. >> >> For wifi, the pixel 3 reports a board-id of 0xFF, and downstream >> only includes a single bdwlan file. The qcom,ath10k-calibration-variant >> property is set to ensure that the correct calibration data is used. >> >> Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org> >> [AmitP: Cherry-picked and refactored from Bjorn's db845c dts >> ("arm64: dts: qcom: Add Dragonboard 845c") >> https://lkml.org/lkml/2019/6/6/7] >> Signed-off-by: Amit Pundir <amit.pun...@linaro.org> >> [sumits: merged commits to add board and msm ids, gpio range reservation, >> ufs device-reset gpio and adaptation to v5.5+ changes] >> Signed-off-by: Sumit Semwal <sumit.sem...@linaro.org> >> [vinod: Add display nodes] >> Signed-off-by: Vinod Koul <vk...@kernel.org> >> [caleb: remove db845c bits, cleanup, add reserved-memory for modem/wifi] >> Signed-off-by: Caleb Connolly <ca...@connolly.tech> > > Thanks for your patch, few minor items to improve. [...] >> +&wifi { >> + status = "okay"; >> + >> + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; >> + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; >> + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; >> + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; >> + >> + qcom,snoc-host-cap-8bit-quirk; >> + qcom,ath10k-calibration-variant = "google_blueline"; > > Ideally Kalle Valo should bless this string, added him to the Cc list. > Could you please submit the board file to the ath10k (see [1] for the > description and [2] for an example). Thanks for CC. I prefer "google-blueline" but that's really a cosmetic issue. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
