On 07/15/2012 09:44 PM, Daniel Golle wrote:
On 16/07/12 03:48, Ocean Su wrote:
But I see below test result. I don’t know why the 2.4G can’t go up to 40MHz.
Probably the spectrum is busy. HT40+/- is only used when there is no other
activity on the secondary channel. You can use the no_scan
On 07/15/2012 02:39 AM, Adrian Chadd wrote:
On 12 July 2012 07:11, Ben Greear gree...@candelatech.com wrote:
We have a 3x3 NIC (wpea-127n). A user reports that when using
a single antenna cable to directly connect to an AP (with attenuator),
that one of the antenna can do about 30Mbps
Ben Greear wrote:
Ok, I'm going to look into this chain configuration.
This user is also reporting that our box can only communicate
down to about -72dBm, whereas some off-the-shelf USB dongles
are providing around 100kbps at -78 to -80dBm.
Are there any published rate v/s range results
On 07/16/2012 10:28 AM, Sujith Manoharan wrote:
Ben Greear wrote:
Ok, I'm going to look into this chain configuration.
This user is also reporting that our box can only communicate
down to about -72dBm, whereas some off-the-shelf USB dongles
are providing around 100kbps at -78 to -80dBm.
On Fri, Jul 13, 2012 at 2:43 AM, David M. Zendzian d...@zzservers.com wrote:
I have confirmed that I have the latest 1.3 firmware using a usb adaptor
(AWUS036NHA) with Atheros 9271 chipset. The adaptor keeps receiving an
error on loading the firmware.
Google has not shown me anything
Hello,
Do you know the last function in the driver which is called before Tx
every MPDU or at least before Tx of a AMPDU. We want to timestamp the
Tx time in the log.
Regards,
kamran
___
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
