current firmware will enable STBC_TX, only if other peer support it.
This patch provide ht_peer_caps to firmware.
FW versions 1.3, 1.4 should be able to work with it.
Tested on ar7010+ar9280 and ar7010+ar9287.
- v2. Use one bit instead of two for RX STBC flags.
- v3. Use ATH_RC_*_STBC_FLAG instead of WLAN_RC_RX_STBC_FLAG
- v4. Remove TX flag. This flag is used only to keep AR7010 warm.
Signed-off-by: Oleksij Rempel <li...@rempel-privat.de>
---
drivers/net/wireless/ath/ath9k/htc.h | 1 +
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 +++
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 2 ++
3 files changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h
b/drivers/net/wireless/ath/ath9k/htc.h
index d3b099d..c56a0d4 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -142,6 +142,7 @@ struct ath9k_htc_target_aggr {
#define WLAN_RC_40_FLAG 0x02
#define WLAN_RC_SGI_FLAG 0x04
#define WLAN_RC_HT_FLAG 0x08
+#define ATH_RC_RX_STBC_FLAG 0x40
struct ath9k_htc_rateset {
u8 rs_nrates;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index a47f5e0..c79c5ac 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -517,6 +517,9 @@ static void setup_ht_cap(struct ath9k_htc_priv *priv,
ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
tx_streams, rx_streams);
+ if (tx_streams >= 2)
+ ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+
if (tx_streams != rx_streams) {
ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
ht_info->mcs.tx_params |= ((tx_streams - 1) <<
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 0743a47..c744135 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -623,6 +623,8 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv
*priv,
trate->rates.ht_rates.rs_nrates = j;
caps = WLAN_RC_HT_FLAG;
+ if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
+ caps |= ATH_RC_RX_STBC_FLAG;
if (sta->ht_cap.mcs.rx_mask[1])
caps |= WLAN_RC_DS_FLAG;
if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
--
1.8.1.2
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
