Re: [ath9k-devel] [PATCH RFC v3 1/3] Documentation: dt: net: add ath9k wireless device binding

2016-06-27 Thread Kalle Valo 
Martin Blumenstingl  writes:

> Add documentation how devicetree can be used to configure ath9k based
> devices.
>
> Signed-off-by: Martin Blumenstingl 
> ---
> changes in v2 -> v3:
> - improved wording of the qca,disable-2ghz and qca,disable-5ghz properties
> - replaced qca,eeprom-name with qca,no-eeprom (the eeprom name is now
>   built automatically within ath9k). The naming was chosen to stay
>   consistent with other drivers (such as davicom-dm9000 and via-velocity)
> - added reference to the mac-address and local-mac-address properties
> - removed invalid device_type property from the example
>
>  .../devicetree/bindings/net/wireless/qca,ath9k.txt | 46 
> ++
>  1 file changed, 46 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt

For device tree bindings document changes you should CC the device tree
list:

$ scripts/get_maintainer.pl -f Documentation/devicetree/bindings/net/wireless/
Kalle Valo  (maintainer:NETWORKING DRIVERS (WIRELESS))
Rob Herring  (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE 
TREE BINDINGS)
Mark Rutland  (maintainer:OPEN FIRMWARE AND FLATTENED 
DEVICE TREE BINDINGS)
linux-wirel...@vger.kernel.org (open list:NETWORKING DRIVERS (WIRELESS))
net...@vger.kernel.org (open list:NETWORKING DRIVERS)
devicet...@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE 
BINDINGS)
linux-ker...@vger.kernel.org (open list)

-- 
Kalle Valo
___
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Re: [ath9k-devel] [PATCH RFC v3 1/3] Documentation: dt: net: add ath9k wireless device binding

2016-06-26 Thread Julian Calaby 
Hi Martin,

On Fri, Jun 24, 2016 at 10:34 PM, Martin Blumenstingl
 wrote:
> Add documentation how devicetree can be used to configure ath9k based
> devices.
>
> Signed-off-by: Martin Blumenstingl 
> ---
> changes in v2 -> v3:
> - improved wording of the qca,disable-2ghz and qca,disable-5ghz properties
> - replaced qca,eeprom-name with qca,no-eeprom (the eeprom name is now
>   built automatically within ath9k). The naming was chosen to stay
>   consistent with other drivers (such as davicom-dm9000 and via-velocity)
> - added reference to the mac-address and local-mac-address properties
> - removed invalid device_type property from the example
>
>  .../devicetree/bindings/net/wireless/qca,ath9k.txt | 46 
> ++
>  1 file changed, 46 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt 
> b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
> new file mode 100644
> index 000..ff83fd4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
> @@ -0,0 +1,46 @@
> +* Qualcomm Atheros ath9k wireless devices
> +
> +This node provides properties for configuring the ath9k wireless device. The
> +node is expected to be specified as a child node of the PCI controller to
> +which the wireless chip is connected.
> +
> +Required properties:
> +- compatible: Should be "qca,ath9k"
> +
> +Optional properties:
> +- reg: Address and length of the register set for the device.
> +- qca,gpio-mask: The GPIO mask
> +- qca,gpio-val: The GPIO value
> +- qca,led-pin: The GPIO number to which the LED is connected
> +- qca,led-active-high: The LED is active when the GPIO is HIGH
> +- qca,clk-25mhz: Defines that at 25MHz clock is used
> +- qca,no-eeprom: Indicates that there is on physical EEPROM connected

Typo: ...Indicates that there is _no_ physical EEPROM...

Thanks,

-- 
Julian Calaby

Email: julian.cal...@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/
___
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel

[ath9k-devel] [PATCH RFC v3 1/3] Documentation: dt: net: add ath9k wireless device binding

2016-06-24 Thread Martin Blumenstingl 
Add documentation how devicetree can be used to configure ath9k based
devices.

Signed-off-by: Martin Blumenstingl 
---
changes in v2 -> v3:
- improved wording of the qca,disable-2ghz and qca,disable-5ghz properties
- replaced qca,eeprom-name with qca,no-eeprom (the eeprom name is now
  built automatically within ath9k). The naming was chosen to stay
  consistent with other drivers (such as davicom-dm9000 and via-velocity)
- added reference to the mac-address and local-mac-address properties
- removed invalid device_type property from the example

 .../devicetree/bindings/net/wireless/qca,ath9k.txt | 46 ++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt

diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt 
b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
new file mode 100644
index 000..ff83fd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
@@ -0,0 +1,46 @@
+* Qualcomm Atheros ath9k wireless devices
+
+This node provides properties for configuring the ath9k wireless device. The
+node is expected to be specified as a child node of the PCI controller to
+which the wireless chip is connected.
+
+Required properties:
+- compatible: Should be "qca,ath9k"
+
+Optional properties:
+- reg: Address and length of the register set for the device.
+- qca,gpio-mask: The GPIO mask
+- qca,gpio-val: The GPIO value
+- qca,led-pin: The GPIO number to which the LED is connected
+- qca,led-active-high: The LED is active when the GPIO is HIGH
+- qca,clk-25mhz: Defines that at 25MHz clock is used
+- qca,no-eeprom: Indicates that there is on physical EEPROM connected
+   to the ath9k wireless chip (in this case the
+   calibration / EEPROM data will be loaded from
+   userspace using the firmware mechanism)
+- qca,check-eeprom-endianness: Allow checking the EEPROM endianness and
+   swapping of the EEPROM data if required
+- qca,disable-2ghz: Overrides the settings from the EEPROM and disables
+   the 2.4GHz band, even if enabled in the EEPROM
+- qca,disable-5ghz: Overrides the settings from the EEPROM and disables
+   the 5GHz band, even if enabled in the EEPROM
+- mac-address: See ethernet.txt in the parent directory
+- local-mac-address: See ethernet.txt in the parent directory
+
+In this example, the node is defined as child node of the PCI controller.
+
+pci {
+   pcie@0 {
+   reg = <0 0 0 0 0>;
+   #interrupt-cells = <1>;
+   #size-cells = <2>;
+   #address-cells = <3>;
+   device_type = "pci";
+
+   ath9k@0,0 {
+   compatible = "qca,ath9k";
+   reg = <0 0 0 0 0>;
+   qca,disable-5ghz;
+   };
+   };
+};
-- 
2.9.0

___
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel