Hi
I need to make a patch and submit it (thanks for the reminder) as the
pinout definitions had to change for some reason in v6.
Download the zipfile off helix.air.net.au and copy over the avrdude.cfg in
there. I had problems until I updated the pin definitions.
Regards
Jason Hecker
On 11 May 2014 06:24, dc...@gmx-topmail.de wrote:
system: archlinux
avrdude: 6.1
libftdi1: 1.1
libusb: 1.0.18
programmer: um232h
target: atmega328p, bare-boned, internal 8MHz oscillator, low_fuses=0xE2,
high_fuses=0xDA, extended_fuses=0x05
wiring: following instructions
http://helix.air.net.au/index.php/avrdude-and-ftdi-232h/;
Hello,
I bought an um232h and now I'm tyring to program an atmega328p. Using
arduinoISP works, using um232h doesn't work:
# avrdude -p m328p -c um232h -b 300 -t
E avrftdi_program_enable(884): Device is not responding to program
enable. Check connection.
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
avrdude done. Thank you.
Executing avrdude -p m328p -c um232h -b 300 -t -F:
# avrdude -p m328p -c um232h -b 300 -t -F
E avrftdi_program_enable(884): Device is not responding to program
enable. Check connection.
avrdude: initialization failed, rc=-1
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0xe8dc6b
avrdude: Expected signature for ATmega328P is 1E 95 0F
avrdude part
part
AVR Part : ATmega328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
--- - - -- -- -- -
- -
eeprom6520 40 no 10244 0 3600
3600 0xff 0xff
flash 65 6 1280 yes 32768 128256 4500
4500 0xff 0xff
lfuse 0 0 00 no 10 0 4500
4500 0x00 0x00
hfuse 0 0 00 no 10 0 4500
4500 0x00 0x00
efuse 0 0 00 no 10 0 4500
4500 0x00 0x00
lock 0 0 00 no 10 0 4500
4500 0x00 0x00
calibration0 0 00 no 10 0 0
0 0x00 0x00
signature 0 0 00 no 30 0 0
0 0x00 0x00
avrdude q
q
avrdude done. Thank you.
The device signature is changing randomly. Any idea?
Thanks.
___
avrdude-dev mailing list
avrdude-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
___
avrdude-dev mailing list
avrdude-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/avrdude-dev