Whoops,
this is definitly a bug, thanks for pointing that out. Committed in r1552.
On Mon, Jan 18, 2010 at 07:31:22PM +0800, Marek Lindner wrote:
Hi,
i've just committed this patch in revision 1551, as no further comments and
critiques came in. I would consider this patch rather
On Monday 18 January 2010 23:24:26 Andrew Lunn wrote:
gw_node_update() is missing a rcu_read_unlock(); before the return
inside the list_for_each_entry_rcu() loop. The others are less
serious, but should be corrected as well.
Thanks - I just fixed it.
What does this error message want to tell
Hey Jaideep,
as Sven mentioned correctly, using the WPA sequence numbers in
WPA_NONE should be ignored. Some drivers (like madwifi) have to be
teached to do that. Sequence numbers do not make much sense in Ad-Hoc
anyway, as there is no central management for these sequence numbers. Of
course,
Original-Nachricht
Datum: Mon, 18 Jan 2010 21:38:32 +0800
Von: Marek Lindner lindner_ma...@yahoo.de
Could you please let us know what part of the wiki does not work as
expected ?
Only then we can improve it. :)
Ah yes, the instructions were actually were in the
Original-Nachricht
Datum: Mon, 18 Jan 2010 14:51:20 +0100
Von: Andrew Lunn and...@lunn.ch
It would also be good to know the MAC addresses for the two laptops
and the ARM board, so we know what messages are coming from where.
On the laptop:
HWaddr 00:22:fa:dc:9a:ce
and
Original-Nachricht
Datum: Tue, 19 Jan 2010 20:07:38 +0800
Von: Marek Lindner lindner_ma...@yahoo.de
It confirmed what we saw in the other logs: This device (the laptop?) does
not
see the packets from the other side, therefore the protocol correctly
assumes
a dead
And a new try to send the log, previous was rather big and didn't get sent.
This one is shorter and missing all the multicast traffic.
-Juha
--
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.!
http://portal.gmx.net/de/go/dsl02
ARM-batman-wireshark.log
Description: Binary data
Juha Ylönen wrote:
I got the latest trunk up and running, some changes were required to get it
to crosscompile for ARM (and 2.6.24 kernel). Same behaviour as before,
device log shows a lot of activity, but laptop batman doesn't seem to be
doing much anything. I tried the wireshark and got a
Juha Ylönen wrote:
As far as I can see only data from 00:22:fa:dc:9a:ce can be seen (send
from us
aka laptop?). Have you tested if the adhoc connection between this two
devices
(arm - laptop) is really working (just set up the adhoc network as
usual and
then give them an ip instead
On Tue, Jan 19, 2010 at 08:12:49AM +0800, Marek Lindner wrote:
On Monday 18 January 2010 23:24:26 Andrew Lunn wrote:
gw_node_update() is missing a rcu_read_unlock(); before the return
inside the list_for_each_entry_rcu() loop. The others are less
serious, but should be corrected as well.
Hello,
just as a side note, would you mind sharing your changes which were required to
cross compile
for ARM? batman-adv is supposed to support 2.6.24, and if there is any trouble
with this
on ARM i'd like to add support for it.
Thank you very much,
Simon
On Tue, Jan 19, 2010 at
11 matches
Mail list logo