I put Maximum Volumes to 50 in default Pool, and now I get this error:
17-Nov 08:12 MYnas-sd: Job BackupCatalog.2005-11-17_01.10.00 waiting.
Cannot find any appendable volumes.
Please use the label command to create a new Volume for:
Storage: nas1-device
Media type: File
Hi !
Luke Dean wrote:
Last month I reported a problem where my system would hang whenever I
ran multiple concurrent jobs that backup to a single RAID array after
upgrading from bacula 1.36.2 to 1.36.3. This problem still persists in
1.38.1.
I`m still using 1.37.40 but since you seem to
Hello,
Installing package SUNWarc help a little bit, but now the ./configure script
gives another error
export
PATH=/usr/bin::/usr/ccs/bin:/etc:/usr/openwin/bin:/usr/local/bin:/usr/sfw/bin:/opt/sfw/bin:/usr/ucb:/usr/sbin
./configure --enable-client-only --disable-readline
checking for
Save you troubles, install a binary package from
www.blastwave.org. 1.36.3 client is in the stable
distribution.
Marcin Wasilewski wrote:
Hello,
Installing package SUNWarc help a little bit, but now the ./configure
script gives another error
export
[EMAIL PROTECTED] wrote:
Hi Thomas,
I think you're missing an =. Should be Volume Retention = 4 weeks
Also try Recycle Current Volume = yes. Bacula will use whichever volume is
mounted, but obeys the retention periods.
Hope this helps,
Matt
Good eye Matt, but that was a just a typo in
Hi,
I've migrated from sqlite to mysql doing all the steps necessaries.
Everything is fine, but when I ran a job:
17-Nov 13:23 backup-dir: Start Backup JobId 37,
Job=gatewayBackup.2005-11-17_13.23.39
17-Nov 13:23 backup-sd: Failed command: use storage=gateway
media_type=File pool_name=gateway
Good eye Matt, but that was a just a typo in the email.
I did wonder if it was :-)
After doing some math I noticed that the volume retention period was one
year for all of my tapes, even though it was set to four weeks in the pool
resource. I purged a tape and relabeled it and sure enough
Hi!
I'd like to use the new Run-directive in the Job Resource to define a
job that should be run after the main backup-job. (This job should
backup the bacula database directory and is called BackupCatalog.)
However, since my schedule uses daily incremental backups that go to a
PoolDaily during
[EMAIL PROTECTED] wrote:
Good eye Matt, but that was a just a typo in the email.
I did wonder if it was :-)
After doing some math I noticed that the volume retention period was one
year for all of my tapes, even though it was set to four weeks in the pool
resource. I purged a tape and
I can't imagine where is the problem, sorry. Maybe if you send us the
bacula-web.conf file we could found something...
El Jueves 17 Noviembre 2005 12:36, Everton Thomaz escribió:
Hello Juan.
I'm using mysql.
The web server and mysql is in the same machine.
I did the following test:
On Thu, 17 Nov 2005 13:49:46 +0100, Marcin Wasilewski [EMAIL
PROTECTED] said:
Marcin Hello,
Marcin Installing package SUNWarc help a little bit, but now the ./configure
script
Marcin gives another error
Marcin export
Marcin
On Thursday 17 November 2005 11:01, Julien Cigar wrote:
I think I found the problem.
I changed the scsi id of the tape drive from ID 0 to ID 6 and it *seems*
to work better (I did a full backup and no problems occured yet). I read
that apparently ID 0 and ID 1 should not be used for tape
Please read the online documentation on the Web site. It gives a couple more
tips ...
On Thursday 17 November 2005 12:36, Everton Thomaz wrote:
Hello Juan.
I'm using mysql.
The web server and mysql is in the same machine.
I did the following test:
mysql -h localhost -u bacula -p
By library I mean tape library or autoloader. My library holds 23 tapes,
slots 1-3 were empty as these tapes are offsite. When I ran a test backup
yesterday with Recycle Oldest Volume = yes defined, bacula tried to
recycle one of the three volumes that are offsite, I assume because it was
On Thu, 17 Nov 2005, Paul Heinlein wrote:
I haven't used Solaris 10, so pardon me for guessing somewhat.
Assuming that /lib/cpp is the Solaris (not GNU) cpp, I think you have
two choices:
It could be either. Solaris 10 comes with full GNU kit as an optional
install.
Sun's own compilers are
Im using Bacula 1.38 and what I wanna do is:
Im using one tape for each day of the week, and even if my tape is not full, I
want to re-write it. How can i do that?
---
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today
Julien I think I found the problem. I changed the scsi id of the
Julien tape drive from ID 0 to ID 6 and it *seems* to work better (I
Julien did a full backup and no problems occured yet). I read that
Julien apparently ID 0 and ID 1 should not be used for tape drives
Julien (it's for booting
John Stoffel wrote:
Julien I think I found the problem. I changed the scsi id of the
Julien tape drive from ID 0 to ID 6 and it *seems* to work better (I
Julien did a full backup and no problems occured yet). I read that
Julien apparently ID 0 and ID 1 should not be used for tape drives
Julien
On Thu, 17 Nov 2005, Daniel Holtkamp wrote:
Hi !
Luke Dean wrote:
Last month I reported a problem where my system would hang whenever I ran
multiple concurrent jobs that backup to a single RAID array after upgrading
from bacula 1.36.2 to 1.36.3. This problem still persists in 1.38.1.
Hi,
I have many restore jobs, one for each server.
But every time I try to run a restore it auto-selects the storage device.
For ex. this is one of the restore jobs:
Job {
Name = colchesterRestore
Type = Restore
Client= colchester-fd
FileSet=colchester
Pool = colchester
Messages = Standard
have you tried the Purge Oldest Volume directive in pool config?
Check it out here:
http://www.bacula.org/rel-manual/Configuring_Director.html#PoolResource
---
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today
Register
I don't have the bacula-web.conf. I have only the bacula.conf in /apache_files/bacula/scripts/bacula.conf Above, my bacula.conf: # cat bacula.conf title = Bacula-Web 1.2 root = /bacula IndexReport = 0 mode = Lite lang = en_EN [.DATABASE] host = localhost login = bacula pass = db_name = bacula
Hello,
A kludge, which I don't like much, would be to move the definition of Pool
into the common part of the jcr.
A much better solution, would be to enhance the Python scripting interface to
include all the variables you want. Most likely all except %s (Since) are
implemented, so it
On Thursday 17 November 2005 18:25, Pedro Henrique Morsch Mazzoni wrote:
I am using FreeBSD. I have checked and it`s ok.
Any sugestions?
Turn on debug perhaps level -d200 and ask for help on the bacula-users list.
Thanks,
Pedro
2005/11/17, Kern Sibbald [EMAIL PROTECTED]:
A wild guess is
On Thu, 17 Nov 2005 08:46:56 -0800 (PST), Paul Heinlein [EMAIL
PROTECTED] said:
Paul On Thu, 17 Nov 2005, Marcin Wasilewski wrote:
Installing package SUNWarc help a little bit, but now the ./configure
script
gives another error
export
You have multiple storage devices with the same Media Type pointing to the
same directory, which means that if you run concurrent jobs, you can have two
threads writing to the same file (Device:Volume), each with a different i/o
packet (Device) thinking it owns the volume. This will result in
You must likely have two storage devices with the same media type, so Bacula
chooses one. Either use different Media Types, so Bacula knows what Storage
device to use or specifically set the storage device using mod. The
documentation explains this problem ...
On Thursday 17 November 2005
I also have the same problem. I have been getting around it by
selecting mod and then changing the storage to the correct
device. It would be nice if it were automatic since my coworkers
may miss this little step and become oh so frustrated.
I'm using 1.36.3 on Debian.
Thanks.
PS Sorry,
Hi List,
There have been a number of postings over the last few years mentioning
Seagate STT2A IDE tape drives - has anyone managaed to get one to
work with Bacula?
FWIW - Suse 9.3 on Athlon 2600XP, Bacula 1.38.1 (and earlier versions)
dmesg reports:
Probing IDE interface ide0...
hdb:
Julien == Julien Cigar [EMAIL PROTECTED] writes:
Julien I don't have any other scsi devices on that chain, the tape
Julien drive is the only device. You're right, the scsi id of the
Julien controller is 7 (it was 1 before, I've also changed this)
Oh good. Putting the controller anywhere but 7
Hello Frank,
On Thursday 17 November 2005 20:56, Frank wrote:
Dear Kern,
Based on the discussions on the bacula-users mailing list, I would
like to propose the following two feature requests. I'm sending
them directly to you, hope that is o.k, it was not clear to me if
I should send them
Hello,
On 17.11.2005 22:29, Kern Sibbald wrote:
On Thursday 17 November 2005 20:56, Frank wrote:
...
-
Item 1: spool-only backup
Origin: Frank Volf ([EMAIL PROTECTED])
Date: 17 november 2005
Status:
What: In
John Stoffel wrote:
Julien I think I found the problem. I changed the scsi id of the
Julien tape drive from ID 0 to ID 6 and it *seems* to work better (I
Julien did a full backup and no problems occured yet). I read that
Julien apparently ID 0 and ID 1 should not be used for tape drives
Julien
AltGrendel wrote:
John Stoffel wrote:
Julien I think I found the problem. I changed the scsi id of the
Julien tape drive from ID 0 to ID 6 and it *seems* to work better (I
Julien did a full backup and no problems occured yet). I read that
Julien apparently ID 0 and ID 1 should not be used
On Thu, 17 Nov 2005 14:34:56 +0100
Attila Fülöp [EMAIL PROTECTED] wrote:
Save you troubles, install a binary package from
www.blastwave.org. 1.36.3 client is in the stable
distribution.
Agreed. And 1.38.1 was put in the unstable tree this afternoon. It
should be at your favorite blastwave
Quoting Kern Sibbald [EMAIL PROTECTED]:
You have multiple storage devices with the same Media Type pointing to the
same directory, which means that if you run concurrent jobs, you can have two
threads writing to the same file (Device:Volume), each with a different i/o
packet (Device) thinking
Hi people,
I need to know how to use the .status command con bconsole, when I
execute it keeps telling me is:
1900 Bad .status command, missing arguments.
I searched in the documentation and it only mention it but does'n
specify its arguments, and also I've checked the source code, on file
I need to know how to use the .status command con bconsole, when I
execute it keeps telling me is:
1900 Bad .status command, missing arguments.
You have to specify what you want the status of.
Try putting one of these after it:
all
dir=dir-name
director
client=client-name
Hi Luke,
Luke Dean wrote:
Try putting one of these after it:
all
dir=dir-name
director
client=client-name
storage=storage-name
I have 1.36.2 version, and doesn't work with the dot command, with the
normal status command is ok, but I need some formatted-less output to
make a GUI, that's
Hello,
Can anyone help me out here. I am wondering if there is a way to
associate tape-labels/volume-labels to days of month. If
any ones tried that do let me know. Or something similar would help too.
On Thursday 17 November 2005 22:02, Arno Lehmann wrote:
Hello,
On 17.11.2005 22:29, Kern Sibbald wrote:
On Thursday 17 November 2005 20:56, Frank wrote:
...
-
Item 1: spool-only backup
Origin: Frank Volf ([EMAIL
41 matches
Mail list logo
