Zitat von Jonathan Horne jho...@skopos.us:
as title says, i have a PV-124T that works with btape like a champ,
but not within bacula for running jobs. when i submit a job to run
to tape, the jobs just sit there.
i have identical job configuration on another server with a larger
Hi,
if i start a job in bacula which should write to a tape library, then i get the
following error.
Fatal error: Device reservation failed for JobId=83: 1998 Volume
VolServer-0374 status is Append, not in Pool.
Storage daemon didn't accept Device Tape because:
3924 Device Tape not
Hello,
2013/2/8 Jürgen Ecker trex...@gmx.de
Hi,
if i start a job in bacula which should write to a tape library, then i
get the following error.
Fatal error: Device reservation failed for JobId=83: 1998 Volume
VolServer-0374 status is Append, not in Pool.
Storage daemon didn't
I am also not sure about upgrading from Simone Caronni's repo. If
purging works fine than there is no need to break Bacula.
On 07-02-2013 16:08, Summers, James B. II wrote:
On Feb 6, 2013, at 5:25 AM, Tilman Schmidt t.schm...@phoenixsoftware.de
wrote:
Am 06.02.2013 04:19, schrieb Summers,
Hi folks,
I'm about to use the update slots scan bconsole command for the
first time as I'm fed up with doing all the manual work changing a set
of tapes involves.
In a perfect (bacula) world, this command would achieve the following:
- load all tapes in the changer one after the other
-
On Thu, Feb 07, 2013 at 08:42:22PM +, Jonathan Horne wrote:
i would like to completely kill and reinstall bacula from the ground up.
id like to keep the backup files i have on disk, and just import them into
the next bacula install, and be able to run restores from them as time
Thanks Guys!
Original-Nachricht
Datum: Fri, 08 Feb 2013 09:50:07 +0100
Von: Jürgen Ecker trex...@gmx.de
An: bacula-users@lists.sourceforge.net
Betreff: [Bacula-users] Autochanger Tape Library Problem
Hi,
if i start a job in bacula which should write to a tape library,
-- Message: 4 Date: Thu, 7 Feb 2013 09:03:21
+0100 From: Geert Stappers geert.stapp...@vanadgroup.com Subject: Re:
[Bacula-users] Deleted (Old) Volumes/Clients Still Showing in Bacula To:
bacula-users@lists.sourceforge.net
bacula-users@lists.sourceforge.net
do you mean the MTX scripts? they are root:root 755, and as far as i know
bacula should be able to access them (on another systems they are
identical owner:permissions, and this system works fine with its tape
drive).
in debug mode, i get this:
bacula-sd: askdir.c:182-76 dird 1000 OK
On Feb 8, 2013, at 3:55 AM, Süleyman Kuran sku...@ayk.gov.tr wrote:
I am also not sure about upgrading from Simone Caronni's repo. If
purging works fine than there is no need to break Bacula.
On 07-02-2013 16:08, Summers, James B. II wrote:
On Feb 6, 2013, at 5:25 AM, Tilman Schmidt
On 2013-02-08 05:17, Uwe Schuerkamp wrote:
Hi folks,
I'm about to use the update slots scan bconsole command for the
first time as I'm fed up with doing all the manual work changing a
set
of tapes involves.
I take it that your tape library does not read barcodes? Or that you
are not
On 2013-02-08 09:12, Jonathan Horne wrote:
this is boggling. my first attempt at getting a tape library
working, i
followed all the steps on dan langille's website until the PV4000
woke up
an wrote data. after following all those same tests and even to the
point
that all tests pass
well, ill retry them all again, but the drive works enough to label all
the barcodes in the drive.
Pool: TapeArchiveFullBackups
+-++---+-+--+--+---
---+-+--+
| mediaid | volumename | volstatus | enabled | volbytes | volfiles
well, ill retry them all again, but the drive works enough to label all
the barcodes in the drive.
Pool: TapeArchiveFullBackups
+-++---+-+--+--+---
---+-+--+
| mediaid | volumename | volstatus | enabled | volbytes |
*dbcheck* sounds like the right tool, i found some info here;
http://linux.die.net/man/8/dbcheck
Also here;
http://www.bacula.org/3.0.x-manuals/en/utility/utility/Volume_Utility_Tools.html#SECTION00212
I want to /remove stale record for deleted *Pools */but I'm unsure of
which
he (bacula) should be able to.
[root@d0lphb040 bacula]# ls -la /dev/sg8
crw-rw 1 root tape 21, 8 Feb 7 13:00 /dev/sg8
[root@d0lphb040 bacula]# ls -la /dev/nst0
crw-rw 1 root tape 9, 128 Feb 7 13:00 /dev/nst0
[root@d0lphb040 bacula]# cat /etc/group|grep bacula
disk:x:6:bacula
Hi,
i have another problem with our tape library. The problem is that i get the
following error.
94 Full Tape.2013-02-08_16.37.17_03 is waiting for an appendable Volume
If i check the storage with stat-2: Storage-Autochanger it shows me the
following information:
Device LTO-4 (/dev/nst0)
well, upon further investigation, it looks like bacula-sd runs as root
anyway.
[root@d0lphb040 ~]# ps maux|grep bacula-sd
root 10838 0.0 0.0 242220 1992 ?-10:04 0:00 bacula-sd
-c /etc/bacula/bacula-sd.conf
thanks,
jonathan
On 2/8/13 9:55 AM, Alan Brown
[root@d0lphb040 ~]# sudo -u bacula mtx -f /dev/sg8 status
Storage Changer /dev/sg8:1 Drives, 8 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 7 Loaded):VolumeTag =
SK1028L1
Storage Element 1:Full :VolumeTag=SK1001L3
Storage Element 2:Full :VolumeTag=SK1011L3
[root@d0lphb040 bacula]# sudo -u bacula tapeinfo -f /dev/nst0
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=0 (Unknown?!)
mtx: Request Sense: Sense Key=No Sense
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx:
My spool disk has 79GB and bacula is allowed (by config) to use
70GB, despooling when it reaches this limit.
Got another error today, similar but not the same (Fatal error:
bsock.c:646 fread attr spool error. ERR=Success):
07-Feb 22:05 bacula-dir JobId 16663: No
2013/2/7 yashmika lamahewage yashmika.lamahew...@gmail.com
2013/2/6 stefano scotti scottistefan...@gmail.com
Hi everybody,
i'm trying to pass the since time as a parameter to my client side script
before running the job.
the user guide says that the related substitution character is %s.
22 matches
Mail list logo