Simone Martinasmart...@noc.skylogicnet.com wrote:
[...]
Someone, from this ML, has bought a new tape library working with Linux
and mtx-changer?
We got a Quantum Superloader 3 on LTO-3 and a Quantum Scalar i40 on two
LTO-4 drives on productive usage with no troubles at all.
- Dan
sofsof wrote:
Hi, i would like to say if a 5.0.2 server is compatible with a 2.2 client ?
Yes, you can use older bacula-fd with newer bacula-sd and bacula-dir. Be
sure, that bacula-sd and bacula-dir are on the same version.
- Dan
Am 4/27/10 12:50 PM, schrieb Matija Nalis:
So your options are either to downgrade the client on Lucid (maybe
there can be found a package for 2.4.x version ?
You may try to install the Ubuntu package for Karmic Koala or Hardy
Heron, which both are 2.4.4.
Cheerz,
- Dan
Dear Mario
Am 3/21/10 9:31 PM, schrieb Mario Hosse:
If you have a
charger with more mailslots, please test my script! I need the script to
import for weekly tapes from a safe.
I can test your script. Please send your script again, but as
attachment. It seems that some mailservers are
Hi all,
my question may be a vendor specific one or may be a mtx-changer
question. My Quantum autochanger has 5 Import/Export slots, which
basically are just better accessible tape slots. Mtx displays the slots
as I/E slots. But tapes in those slots are not recognised by Bacula. See
attached
Am 2/18/10 11:34 PM, schrieb Arthur Emerson III:
I built a dedicated Bacula SD box from a 2U Intel-branded
server. It has 12 x 1TB SATA drives, and boots off of an
IDE solid state disk.
[..]
Thank you for your information Arthur. You should definitly post your
whole setup on Bacula Wiki,
Am 2/18/10 8:03 AM, schrieb Erik P. Olsen:
If a volume is in its retention period but all jobs in it have been pruned
will
the volume nevertheless be target for reuse?
No. The volume will be kept as long as the retention period is running.
You can override this behaviour by using the
Hi Tino
Am 2/15/10 11:10 AM, schrieb Tino Schwarze:
And even though there are volumes in the scratch pool, e.g.:
Pool: Scratch
+-++---+-+-+--+--+-+--+---+---+-+
| mediaid
Thank you for all your replies.
Am 2/15/10 11:38 AM, schrieb Alan Brown:
MTX simply reports what the changer thinks it has - and right now the
changer doesn't realise there is a second drive installed.
This is a hardware configuration issue. Solve that first, then check
to see if MTX shows a
Dear all,
I need some hints, ideas whatever. I have a Quantum Scalar i40 with two
separate LTO-4 SAS drives. I've conneced the drives with two SAS cables
to two separate SAS controller within the backup server.
# cat /proc/scsi/scsi
Attached devices:
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Hi Ismail,
Am 2/2/10 9:50 AM, schrieb Ismail OZATAY:
I want to use Maximum Volume Bytes option to create separate volumes but
although I use this option it is still growing in an only one volume.
What is wrong with my config ? Here is the latest state of the volume.
[..]
Here is my pool
Hi all
Just an idea of mine, let me know if this is possible or not.
Let's say I have a huge autochanger with lots of space and lots of
cartriges available. Let's also assume, that I have a uncontrollable
data groth and I cannot (or I am too lazy to) predict the ammount of
cartridges needed
Am 2/2/10 3:06 PM, schrieb John Drescher:
This pool is called the Scratch pool.
That is what I use with my changer. After adding any new volumes I add
them all to the scratch pool using label barcodes. Bacula then grabs
volumes from this Scratch when it needs a new volume from any of my
10+
Sorry for x-posting, but mtx-changer ML seems to be very quiet.
Did someone tried to use *Quantum Scalar i40* tape library with Bacula?
Or does Quantum/ADIC have a standard interface for autochangers and I
can be sure, that if the mtx-changer script is working for Scalar i500,
it automatically
Dear all,
I am considering to use migration jobs to set up a D2D2T backup
scenario. I am actually considering to use pools like that:
Migration Job
Backup Job -- WEEKLY1 Tape Pool
/
Backup
James Harper wrote:
I am considering to use migration jobs to set up a D2D2T backup
scenario. I am actually considering to use pools like that:
Migration Job
Backup Job -- WEEKLY1 Tape Pool
Dear list,
I have a rather general question. Is it possible to do two phase or two
pass backups with Bacula? That means I firstly want to back up a client
over network to a disk array and on a second step put this backup to
tape/autoloader.
I do not only mean to use disk cache on the storage
17 matches
Mail list logo
