Or look for
Running Concurrent Jobs
http://www.bacula.org/5.2.x-manuals/es/problems/problems/Tips_Suggestions.html
<http://www.bacula.org/5.2.x-manuals/es/problems/problems/Tips_Suggestions.html>
—Guy
> On 29 Oct 2018, at 11:43, Uwe Schuerkamp wrote:
>
> On Mon, Oct 29, 201
with those tapes. It
works rather well and I've been using it for my off-site backups for over 2
years now.
On 17 Sep 2013, at 02:50, Greg Woods g...@gregandeva.net wrote:
On Mon, 2013-09-16 at 18:12 +0300, Guy wrote:
I use SATA drives and pretend they are tape drives by using vchanger.
I
I would look to use a USB hub and something like this:
http://www.maplin.co.uk/buy-hard-drives-and-memory/hard-drive-enclosures-and-docks/hard-drive-docks
The slight issue you will have is with performance, as you'll be reading and
writing up and down the USB channel.
---Guy
Sent from my iPad
drives at a time. I can then remove the drives and put
them in a flight case for off-site storage.
---Guy
Sent from my iPad
On 16 Sep 2013, at 18:00, Téïcée Bacula bacul...@teicee.com wrote:
Hi Greg
If you are looking for a kind of USB tape drive you should have a look
at RDX systems
Have you configured the postgres database?
can you connect to the postgres database called bacula with the username
bacula and no password
bacula-dir: postgresql.c:243-0 db_user=bacula db_name=bacula db_password=
it would seem that bacula doesn't seem to think it can.
Cheers,
--Guy
,
Guy
-Message d'origine-
De : Adrian Reyer [mailto:bacula-li...@lihas.de]
Envoyé : 6 juin 2012 17:01
À : Bertrand, Guy
Cc : Guido Falsi; John Drescher; bacula-users@lists.sourceforge.net
Objet : Re: [Bacula-users] tape drive on 2nd server
On Tue, May 29, 2012 at 02:19:01PM +, Bertrand
or the HTTP menu to move tapes around,
that information is not getting back to Bacula... If a tape is in the wrong
place, Bacula should read the header info on the tape, decide that it is not
the right one, and prompt you to find it ( I think...I'm still learning Bacula)
Regards,
Guy
Guido,
Do you have any details on how you setup your iSCSI pass-through?? Any URL you
can share??
Regards,
Guy
-Message d'origine-
De : Guido Falsi [mailto:m...@madpilot.net]
Envoyé : 7 mai 2012 13:50
À : John Drescher
Cc : Bertrand, Guy; bacula-users@lists.sourceforge.net
Objet : Re
Are you doing compression or encryption? And if so which? If the files are
large I found that those can really slow down the transfers.
---Guy
(via iPhone)
On 19 May 2012, at 01:00, Graham Worley g.wor...@bangor.ac.uk wrote:
Hello,
I've just started using Bacula having installed the RPMs
yes that works.. I've done it...
The system doesn't need to decrypt the data... it just needs to know which
version is the latest and it can do that from the catalog.
--Guy
On 12 Dec 2011, at 09:55, Silver Salonen wrote:
Hello.
Is running VirtualFull possible with encrypted backups
Yes files are encrypted separately...
and yes it just copies the file from SD to the new pool... it does nothing with
the file/data just copies it.
--Guy
On 12 Dec 2011, at 10:07, Silver Salonen wrote:
OK, but how can SD merge data from encrypted volumes?
I'd guess it goes smth like
in their caddies from the backup server and put them in a
flight case to store them over one aeroplane's wing away.
---Guy
(via iPhone)
On 4 Dec 2011, at 10:01, jonathanb bacula-fo...@backupcentral.com wrote:
Our intern has enough Linux knowledge to do this and he will be assisted by
my
The quickest way to find out is to configure a backup without crypto and see
how long it takes. You could also do another test with GZIP compression on/off.
---Guy
(via iPhone)
On 30 Oct 2011, at 16:23, Alex Crow ac...@integrafin.co.uk wrote:
If it is supported in any way, I'd be happy
Can you check the files using a simple text editor like pico or vi. I would
suspect an extra char at the end of the line
Otherwise I guess make sure the director name also matches
---Guy
(via iPhone)
On 4 Aug 2011, at 18:09, Jari Fredriksson ja...@iki.fi wrote:
4.8.2011 19:26, Köksal Erdal
Hello,
I would be interested in seeing those scripts. I think I could adapt them for
virtual full and other copy jobs I would like to implement.
Cheers
---Guy
(via iPhone)
On 17 Jul 2011, at 18:15, Adrian Reyer bacula-li...@lihas.de wrote:
I have a similar problem here, however, as we
If this is a Linux system just use touch to update the timestamps on the file
---Guy
(via iPhone)
On 14 Apr 2011, at 08:54, Christian Manal moen...@informatik.uni-bremen.de
wrote:
Am 14.04.2011 08:33, schrieb James Harper:
The last modified datestamp on MSSQL database files doesn't get
---Guy
(via iPhone)
On 9 Mar 2011, at 01:22, Phil Stracchino ala...@metrocast.net wrote:
I just had a very odd (and rather alarming, for a few minutes) event happen.
Five days ago, I received a new box of blank LTO2 tapes.
On Sunday, I deleted the first six old LTO1 tapes from my FULL
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
did you compile bacula with the postgres option selected? That will drop the
scripts in /etc/bacula/
- --Guy
On 14 Feb 2011, at 14:44, Sean Smith wrote:
I have recently installed Bacula with Postgres onto a new fedora
install. I do not see
Maybe the time stamp on the file changed.
---Guy
(via iPhone)
On 30 Jan 2011, at 11:00, aiv bacula-fo...@backupcentral.com wrote:
Hello
I have some problems with mysql or svn backup. I will explain this on MySQL
backup:
In Job declaration i have Client Run Before Job = .../mysql_dump.sh
also have the ability to track changes done on the configuration
files.
---Guy
Sent from my iPad
On 29 Jan 2011, at 19:02, BlackAdderDK bacula-fo...@backupcentral.com wrote:
... my servers, under the following conditions:
I have 26 servers (SLES Linux), distributed across several weak WAN
---Guy
(via iPhone)
On 27 Jan 2011, at 19:20, John Drescher dresche...@gmail.com wrote:
2011/1/27 Laxansh K. Adesara laxa...@anatec.com:
Hi,
After some headaches configuring bacula-dir I have another problem. When I
try to test bacula-dir I get following error
Bacula-dir
What's your schedules look like?
I would suspect that you have incremental and FULL running at the same time,
and if there is not a pre-existing FULL then the incremental is upgraded to a
full.
I changed the priority of my incrementals so that they don't run while fulls
are running.
--Guy
hmm.. ok can you paste your fileSet? maybe you're including the files twice.
---Guy
On 18 Jan 2011, at 10:07, Mark Round wrote:
Thanks for the comments. I’ve checked, and Incrementals run Tuesday to
Sunday, and Fulls on Monday morning, so they aren’t running twice :
Schedule
stuff included.
It's very odd.
---Guy
--
Protect Your Site and Customers from Malware Attacks
Learn about various malware tactics and how to avoid them. Understand
malware threats, the impact they can have on your
! :P
--Guy
On 17 Jan 2011, at 10:46, Jose Antonio Rodriguez Martin wrote:
I have in the fileset as follows:
Include {Options {Signature = MD5; compression = GZIP5}
And it works correctly:
..
Software Compression: 39.4%
..
2011/1/17 Guy g...@britewhite.net:
On 17 Jan 2011, at 10:20
that's a good strategy... I've had a few instances where there was a typo in
the configuration file and it crashed bacula.
Ideally reload should validate the configs before reloading them.
--Guy
On 14 Jan 2011, at 12:37, John Drescher wrote:
On Thu, Jan 13, 2011 at 8:05 AM, Phil Stracchino
Sorry Bacula is not that clever..indeed it's just checking for files which
changes.. It's not able to determine how the file changed, or just back up
those bits which changed.
---Guy
Sent from my iPad
On 13 Jan 2011, at 20:44, Lawrence Strydom qhol...@gmail.com wrote:
Hi And thanks for all
Thanks for that... I just wanted to reduce the number files I needed to install
on the NAS as it's now different from standard install which might cause issues
later. I think your right those and I'll have to build a package for e NAS
which has all the libraries included.
---Guy
Sent from my
over the PST to the backup solution but at
least it's not filling up long term backups.. and if you want it in a long term
backup, say once every fortnight you can have a job which does push the pst
file to the real backup.
---Guy
On 14 Jan 2011, at 04:57, Lawrence Strydom wrote:
Thanks
and an incremental together.. unless you configure against duplicates.
A differential backup is everything that's changed since the last FULL
backup... Thus is you want to restore you could be using a FULL and the
Differential, rather than FULL, Incremental, Incremental, Incremental
Cheers,
---Guy
, Storage
Configuration, What are your retention times set to?
Cheers,
---Guy
--
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web
,
---Guy
--
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data to be transmitted over the Web. Learn how to
best implement a security strategy that keeps consumers
Hi,
The ExcludeDirContaining worked!.. the .svn is a dir. It seems the
documentation implies that it's a filename-string but works when it's a DIR too
:)
Thanks
---Guy
On 10 Jan 2011, at 14:42, Christian Manal wrote:
Am 10.01.2011 15:04, schrieb Guy:
Hi all,
I would like to exclude any
Indeed it was and that for me is the right thing. It's all in subversion which
is it's self backed up.
---Guy
(via iPhone)
On 10 Jan 2011, at 15:18, Dan Langille d...@langille.org wrote:
On 1/10/2011 10:03 AM, Guy wrote:
On 10 Jan 2011, at 14:42, Christian Manal wrote:
Am 10.01.2011 15
parse_bsr.o pythonsd.o read.o read_record.o record.o
reserve.o scan.o sd_plugins.o spool.o status.o stored_conf.o vol_mgr.o wait.o
-lacl \
-lbacpy -lbaccfg -lbac -lm -lpthread -ldl \
-lcap
../lib/libbac.a(bsys.o): In function `Zinflate(char*, int, char*, int)':
/home/guy
, rather than the Full
backup Done to the OnSite ones?? Specially on the 1st Friday of the Month.
Cheers,
---Guy
--
Gaining the trust of online customers is vital for the success of any company
that requires sensitive data
this, however
it seems estimate doesn't count and works regardless. Is there another way to
test this without running the backup and cancelling it.
Cheers,
--Guy
--
Gaining the trust of online customers is vital
In your conf file are you using fully qualified host names? Ie host.newdomain
or just hostname?
I would suspect you still have entries in resolv.conf for the old domain in the
searchpath. Or maybe PTR records in DNS have not been updated. You can use dig
to test.
---Guy
(via iPhone)
On 4
hello, my brothers.
a machine of mine has died and i would like to keep the last set of
backups forever . . . can someone tell me the right way to go about
making changes to the DB - or whatever it is i need to do - in order to
achieve this goal?
thank you and peace be with you,
guy matz
ahhh . . .
from http://wiki.bacula.org/doku.php?id=sample_configs:
'Since Bacula 2.2.0 you can include the output of a command within a
configuration file with the @| syntax'
i'm on 2.0.3 . . .
thanks for the help,
guy
Martin Simmons wrote:
On Wed, 08 Oct 2008 10:44:17 -0400, Guy Matz said
/etc/bacula/bacula-dir.d/job.conf
@|sh -c 'cat /etc/bacula/bacula-dir.d/job.d/*.conf'
the content of my job.conf file is the @| line above, and the files
referred to in the @| line do exist.
any thoughts?
thanks a lot,
guy
--
Guy Matz Open Finance, LLC
Chelsea Piers - Pier 62 - Suite 316
no, parser doesn't like that either. :-(
On 10/08/2008 02:29 PM, Teodor wrote:
On Wed, Oct 8, 2008 at 5:44 PM, Guy Matz [EMAIL PROTECTED] wrote:
Starting bacula-dir: 03-Oct 18:40 bacula-dir: ERROR TERMINATION at lex.c:545
Config error: Cannot open included config file |: No such file
nope, not that either. are you guys just taking stabs in the dark!? ;-)
thanks,
guy
On 10/08/2008 03:28 PM, Martin Simmons wrote:
On Wed, 08 Oct 2008 10:44:17 -0400, Guy Matz said:
hey-hey,
i'm getting the following error when trying to use the @| notation to
include multiple
Anybody?
Guy Zuercher wrote:
Hello List,
my company is using bacula for quite a while and we find it is a
really cool piece of software! So thanks to Kern and everybody else
involved.
I would like to know if anybody managed to imitate the behaviour of
Veritas as close as possible
Hello List,
my company is using bacula for quite a while and we find it is a
really cool piece of software! So thanks to Kern and everybody else
involved.
I would like to know if anybody managed to imitate the behaviour of
Veritas as close as possible for the following scenario:
-
an idea ?
Thank you, Guy.
Guy Corbaz
ch. du Châtaignier 2
1052 Le Mont
Switzerland
phone:+41 21 652 26 05
mobile: +41 79 420 26 06
freeworld dialup: 785844
iaxtel: 17005530690
e-mail: [EMAIL PROTECTED
got the following message:
3903 Error scanning label command
I also started the sd in interactive mode with -d100 and I notice a message
telling the device (/dev/nst0) is opened in read only mode.
Does anyone have an idea on this problem ?
Thank you very much for your support.
Guy
-pgsql.
Does anyone have an idea ?
Thank you, Guy.
Guy Corbaz
ch. du Châtaignier 2
1052 Le Mont
Switzerland
phone:+41 21 652 26 05
mobile: +41 79 420 26 06
freeworld dialup: 785844
iaxtel: 17005530690
e-mail: [EMAIL PROTECTED
.
Guy Corbaz
ch. du Châtaignier 2
1052 Le Mont
Switzerland
phone:+41 21 652 26 05
mobile: +41 79 420 26 06
freeworld dialup: 785844
iaxtel: 17005530690
e-mail: [EMAIL PROTECTED]
-
Take Surveys. Earn Cash
.
Guy Corbaz
ch. du Châtaignier 2
1052 Le Mont
Switzerland
phone:+41 21 652 26 05
mobile: +41 79 420 26 06
freeworld dialup: 785844
iaxtel: 17005530690
e-mail: [EMAIL PROTECTED]
-
Take Surveys. Earn Cash
-d' ' -f2` | mail -s 'Tape mount request'
backup-operator.example.com ; rm tmp1
Unfortunatley i have not enough time for the multiline regexp. Otherwise
i would do a small python script...
Guy
Martin Simmons wrote:
On Fri, 10 Feb 2006 17:51:47 +, Chris Dennis [EMAIL PROTECTED] said:
I
to create a new Volume for:
Storage: HPStorageWorksUltrium215
Media type: C7971A
Pool: MondayPool
Further i would like to customize the message, so a end user does not
get confused. I know i saw that somewhere...
Anyone has this something similar set up?
regards
Guy
52 matches
Mail list logo
