Hi All.
Bacula is running since ever on my server with Tape Storage. I had a hardware
problem, and when the server restarted, I started to receive the following
problem while Bacula is trying to run a job:
02-Aug 03:40 myserver-dir: Start Backup JobId 227, Job=jobA.2007-08-02_03.40.00
02-Aug
Not that I think John meant this, but least anyone conclude that in
all cases: status == ERROR means you must recyle, it does not.
Sometimes the status gets set to ERROR and you can simply reset the
status to APPEND (via the bconsole command: UPDATE VOLUME). This
used to happen regularly
On 3 Aug 2007 at 11:00, John Drescher wrote:
Hi John/All.
Thanks John for your prompt response.
Is there any solution for this case, or should I replace this tape
with a new one? Since it is not convenient to use the btape command
and loosing all the data on the tape.
When a
On 8/3/07, Hisham WAKED [EMAIL PROTECTED] wrote:
Hi All.
Bacula is running since ever on my server with Tape Storage. I had a
hardware problem, and when the server restarted, I started to receive the
following problem while Bacula is trying to run a job:
02-Aug 03:40 myserver-dir: Start
] Bacula: Tape mounting problem
On 8/3/07, Hisham WAKED [EMAIL PROTECTED] wrote:
Hi All.
Bacula is running since ever on my server with Tape Storage. I had a
hardware problem, and when the server restarted, I started to receive the
following problem while Bacula is trying
Hi John/All.
Thanks John for your prompt response.
Is there any solution for this case, or should I replace this tape with a
new one? Since it is not convenient to use the btape command and loosing all
the data on the tape.
When a tape is in Error status you can not append. To reuse the