On Fri, Sep 18, 2009 at 9:28 AM, Watson, Joe
isjoe...@oklahomacounty.org wrote:
I get the same error on /dev/st0 that I get with /dev/nst0.
Did you try rebooting / restarting the archive?
Are there any errors in your dmesg about scsi or mt?
Are you using an older kernel? If so can you update
will see if it works.
-Original Message-
From: John Drescher [mailto:dresche...@gmail.com]
Sent: Fri 9/18/2009 8:57 AM
To: Watson, Joe; bacula-users
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
On Fri, Sep 18, 2009 at 9:28 AM, Watson, Joe
isjoe...@oklahomacounty.org
On Fri, Sep 18, 2009 at 10:47 AM, Watson, Joe
isjoe...@oklahomacounty.org wrote:
i couldnt get the tape i was using out of the drive and our drive is at the
back of the machine so i had to fiddle with it to get it to move the tape
back.
Sometimes (less than 1 time per 3 months) I see this
: John Drescher [mailto:dresche...@gmail.com]
Sent: Friday, September 18, 2009 10:10 AM
To: Watson, Joe; bacula-users
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
Reply
Dmesg | grep scsi
[1.182331] scsi0 : ata_piix
[1.182435] scsi1 : ata_piix
[2.478747] scsi2
command.
I get this when I try mounting it after I changed the tape to /dev/nst0
-Original Message-
From: Mark Nienberg [mailto:gm...@tippingmar.com]
Sent: Wednesday, September 16, 2009 12:55 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume
...@pcbi.upenn.edu]
Sent: Thursday, September 17, 2009 10:50 AM
To: Watson, Joe
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
Hi Joe,
Before dealing with bacula, make sure you understand how to use the
commands 'mt', 'mtx', 'tapeinfo
: Alex Chekholko [mailto:ch...@pcbi.upenn.edu]
Sent: Thursday, September 17, 2009 10:50 AM
To: Watson, Joe
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
Hi Joe,
Before dealing with bacula, make sure you understand how to use the
commands
, September 17, 2009 11:51 AM
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
I put in brand new tapes is there something I am missing this is the
result of testing the tape drive using btape
Using btape to test the drive /dev/nst0 I get
Drescher [mailto:dresche...@gmail.com]
Sent: Thursday, September 17, 2009 3:56 PM
To: Watson, Joe
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
On Thu, Sep 17, 2009 at 4:30 PM, Watson, Joe
isjoe...@oklahomacounty.org wrote:
I am adding that I
: Thursday, September 17, 2009 11:51 AM
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
I put in brand new tapes is there something I am missing this is the
result of testing the tape drive using btape
Using btape to test the drive /dev/nst0
the tape is in the
drive.
-Original Message-
From: John Drescher [mailto:dresche...@gmail.com]
Sent: Thursday, September 17, 2009 4:20 PM
To: Watson, Joe; bacula-users
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
On Thu, Sep 17, 2009 at 4:58 PM, Watson, Joe
isjoe
-Original Message-
From: John Drescher [mailto:dresche...@gmail.com]
Sent: Thursday, September 17, 2009 4:40 PM
To: Watson, Joe
Cc: bacula-users
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
On Thu, Sep 17, 2009 at 5:32 PM, Watson, Joe
isjoe...@oklahomacounty.org
My email client I use does it on top sorry, but here is my output
No problem.
mt: /dev/nst0: rmtioctl failed: Input/output error
That was for:
mt -f /dev/nst0 status
If so this is really bad. It is essential that mt works with your tape drive
Does
mt -f /dev/st0 status
work?
If not
, 2009 12:12 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
Watson, Joe wrote:
Trying to label the tapes I have with Label Barcodes on bconsole and
it
errors out every time. It times out every time I try labeling a volume
on a tape
.
-Original Message-
From: Mark Nienberg [mailto:gm...@tippingmar.com]
Sent: Tuesday, September 15, 2009 12:12 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
Watson, Joe wrote:
Trying to label the tapes I have with Label Barcodes
Watson, Joe wrote:
With lsscsi I never find a device for /dev/nst0 is why I went with
/dev/sg0 is it possible bacula is expecting the latter and resolves it
on its own somehow?
This is the output from lsscsi -g
[4:0:4:0]tapeHP Ultrium 4-SCSI W24W /dev/st0 /dev/sg0
it after I changed the tape to /dev/nst0
-Original Message-
From: Mark Nienberg [mailto:gm...@tippingmar.com]
Sent: Wednesday, September 16, 2009 12:55 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Creating a Volume on a tape times out
Watson, Joe wrote:
With lsscsi I
Watson, Joe wrote:
Trying to label the tapes I have with Label Barcodes on bconsole and it
errors out every time. It times out every time I try labeling a volume
on a tape.
In the section:
Device {
Name = Ultrium 4-SCSI
Look at the line:
Archive Device = /dev/sg0
It is likely that it
18 matches
Mail list logo
