Hello,
Today is my deadline in the project to increase the speed of writing to
disk. But I failed. :-(
Iam just asking the same question again, If anybody can give me a lead,
it will be very helpful.
I will give the complete detail.
SYSTEM : Power edge 2650.
CPU - 1
RAM - 4GB.
OS - SLES
You might made these changes and see if your better off.
/etc/modprobe.conf
options st buffer_kbs=1024 try_direct_io=1
/etc/bacula/bacula-fd.conf
FileDaemon { # this is me
.
Maximum Network Buffer Size = 65536
}
/etc/bacula/bacula-sd.conf
Device {
...
On Fri, 22 Feb 2008, Rathinasamy, Bhaskaran (ext) wrote:
The Autochanger company claims the following speed of writing.
Data Transfer Rate (native): 80 MBps ( 22.8 GBph )
Data Transfer Rate (compressed): 160 MBps ( 45.5 GBph )
I feel the above is in Megabits/sec?
No, that's
Maximum Writing speed with vdump and 1024 block size - 32
Megabytes/second.
I am not sure what vdump is but if it dumps data to the tape similar
to dd you should be getting over 60MB/s for LTO3. With dd I get over
35MB/s with LTO2 and my root partition as the source data so this
number still
@lists.sourceforge.net
Subject: Re: [Bacula-users] Increase the rate of despooling.
You might made these changes and see if your better off.
/etc/modprobe.conf
options st buffer_kbs=1024 try_direct_io=1
/etc/bacula/bacula-fd.conf
FileDaemon { # this is me
.
Maximum Network
