Re: [Bacula-users] Issue with second writing to tape

Hi, After replacing drive and bought new tapes, the backup using tar succeed ok, the btape test also succeeded ok. but when I use btape fill test it stops after 20GB claiming end of tape, this is the error/message Wrote block=30, file,blk=20,5499 VolBytes=19,353,535,488 rate=18.53

Re: [Bacula-users] Issue with second writing to tape

Hi, After replacing drive and bought new tapes, the backup using tar succeed ok, the btape test also succeeded ok. but when I use btape fill test it stops after 20GB claiming end of tape, this is the error/message Wrote block=30, file,blk=20,5499 VolBytes=19,353,535,488 rate=18.53

Re: [Bacula-users] Issue with second writing to tape

Hello, Again: Did you tested your tape drive with btape utility? For me it is a misconfigured storage device. best regards 2015-09-24 19:54 GMT+02:00 ADCD Support : > I use 64bits system. > I tried with other version of file daemon but still the same, stopped > after 20GB >

Re: [Bacula-users] Issue with second writing to tape

I use 64bits system. I tried with other version of file daemon but still the same, stopped after 20GB 24-Sep 18:46 buffer-bacula-sd JobId 121: Fatal error: Unable to write EOF. ERR=dev.c:1551 ioctl MTWEOF error on "DTL01" (/dev/nst0). ERR=Input/output error. 24-Sep 18:46

Re: [Bacula-users] Issue with second writing to tape

Hello, The recommendation for Bacula versions are: director = storage daemon >= file daemon It seems you have your director and storage daemon running 5.2.5 version and client running 5.2.10. Also, is your system 32 or 64 bits? Best regards, Ana On Tue, Sep 22, 2015 at 2:48 AM, Radosław

Re: [Bacula-users] Issue with second writing to tape

Hello Did you tested your tape drive with btape utility? What was a result of the test? best regards 2015-09-20 18:00 GMT+02:00 ADCD IT : > Hi Everyone, > > I have issue writing to my tapes. > > I have an HP tape library connected to ubuntu 12.04 with bacula 5.2.5 >

[Bacula-users] Issue with second writing to tape

Hi Everyone, I have issue writing to my tapes. I have an HP tape library connected to ubuntu 12.04 with bacula 5.2.5 installed. when I am running a full backup job on any client or with any tape (tapes are new, so its not tape issue) the job stops in the middle after the SD wrote about 20GB