Hi All,
Any one had previous with Quantum superloader 3 before, please let me
know.
btape is not working but mtx work fine.
Is there any further logging I can enable, to get more information for
what btape is finding wrong.
Kind Regards,
Prashant
Prashant Ramhit wrote:
Hi Dan,
From
On Mon, Mar 9, 2009 at 5:17 AM, Prashant Ramhit
prash...@bluebarracuda.com wrote:
Hi All,
Any one had previous with Quantum superloader 3 before, please let me know.
btape is not working but mtx work fine.
Is there any further logging I can enable, to get more information for what
btape
:2581 "" is an invalid command
*
mimmo lariccia wrote:
Date: Mon, 9 Mar 2009 10:00:00 -0400
From: dresche...@gmail.com
To: prash...@bluebarracuda.com; Bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Quantum Superloader3 LT04
On Mon, Mar 9, 2009 at 5:17 AM,
On Mon, Mar 9, 2009 at 12:57 PM, Prashant Ramhit
prash...@bluebarracuda.com wrote:
Hi All,
I manually loaded a tape in the drive and ran btape test.
All went well, except at the auto changer bit, where is gave me unload
status=Bad 268435457 although the tape was unloaded to its slot.
I do
Title: Blue Barracuda
Hi John,
Yes the changer unloaded the tape then I had the error message.
Thanks again,
Prashant
John Drescher wrote:
On Mon, Mar 9, 2009 at 12:57 PM, Prashant Ramhit
prash...@bluebarracuda.com wrote:
Hi All,
I manually loaded a tape in the drive and ran
On Mon, Mar 9, 2009 at 1:07 PM, Prashant Ramhit
prash...@bluebarracuda.com wrote:
Hi John,
Yes the changer unloaded the tape then I had the error message.
I think you need a delay after the load. There is a section it the
mtx-changer that talks about this. The reason why I believe this is
the
Hi Prashant,
I am using Quantum Superloader 3 LTO-4 on W2k Server and Debian (etch)
connected through Adaptec 29160LP to good success. If needed I can do
some test for you.
Cheers. Udo
--
Open Source Business
Hi All,
Is anyone using a SuperLoader 3 LTO4 . I cannot get it to load and
unload tapes.
Please have a look at my bacula-sf.conf, is there anything wrong in it?
Many thanks
Prashant
Storage {
Name = server-sd
SDPort = 9103
WorkingDirectory = "/var/bacula/working"
Pid Directory =
Prashant Ramhit wrote:
Hi All,
Is anyone using a SuperLoader 3 LTO4 . I cannot get it to load and
unload tapes.
Please have a look at my bacula-sf.conf, is there anything wrong in it?
Many thanks
Prashant
Storage {
Name = server-sd
SDPort = 9103
WorkingDirectory =
Hi Dan,
From the following files I can see the Changer device is /devsg0 and
the Archive Device is /dev/nst0.
But btape -c bacula-sd.conf /dev/nst0 give me the following and freezes
and nothing else.
r...@backupserver:/etc/bacula# *btape -c bacula-sd.conf /dev/nst0*
Tape block granularity is
10 matches
Mail list logo