Re: [Bacula-users] autochanger woes

Thanks Patti. I will begin experimenting with it. Robert Threet http://yesistilluseperl.blogspot.com/ -- Original Message -- From: "Clark, Patricia A." To: "bacula-users@lists.sourceforge.net" Subject: Re: [Bacula-users] autochanger woes Date: Mon, 22 Sep

Re: [Bacula-users] autochanger woes

From: RAT mailto:rober...@netzero.net>> Date: Saturday, September 20, 2014 at 5:19 PM To: "rsvanc...@gmail.com<mailto:rsvanc...@gmail.com>" mailto:rsvanc...@gmail.com>>, "bacula-users@lists.sourceforge.net<mailto:bacula-users@lists.sourceforge.net>" ma

Re: [Bacula-users] autochanger woes

aded" command. > Nothing loaded in the drive. OK. > 3303 Issuing autochanger "load 1 1" command. > 3993 Bad autochanger command: /usr/libexec/bacula/mtx-changer /dev/sg4 > load 1 /dev/st1 1 > 3993 result="Loading media from Storage Element 1 into drive 1...Source

Re: [Bacula-users] autochanger woes

e "Drive3" (/dev/st2): ERR=No medium found 20-Sep 16:10 btape JobId 0: Fatal error: butil.c:195 Cannot open "Drive3" (/dev/st2) [root@bacula1 sbin]# ./btape -c /etc/bacula/bacula-sd.conf /dev/st3 Tape block granularity is 1024 bytes. btape: butil.c:290-0 Using device: "/

Re: [Bacula-users] autochanger woes

Thanks all for some good ideas to pursue. I'll let you know. Robert Threet http://yesistilluseperl.blogspot.com/ Please note: message attached From: Heitor Faria To: RAT Cc: "bacula-users@lists.sourceforge.net" Subject: Re: [Bacula-users] autochanger woes Date: Fri, 19 Se

Re: [Bacula-users] autochanger woes

Robert Threet http://yesistilluseperl.blogspot.com/ -- Original Message -- From: "Clark, Patricia A." To: "bacula-users@lists.sourceforge.net" Subject: Re: [Bacula-users] autochanger woes Date: Fri, 19 Sep 2014 12:24:52 + What is the output of the followin

Re: [Bacula-users] autochanger woes

*I can see TWO problems: On Fri, Sep 19, 2014 at 9:59 AM, Heitor Faria wrote: > Robert, > > I can see too problems: > > 1. bacula-sd non prompt connection: please solve this problem appart, > using telnet to port 9103 and status storage commands to try to diagnose > the connection problem. > > 2

Re: [Bacula-users] autochanger woes

Robert, I can see too problems: 1. bacula-sd non prompt connection: please solve this problem appart, using telnet to port 9103 and status storage commands to try to diagnose the connection problem. 2. Tape Library loading tapes problem: maybe a powercycle to the library will solve it, but it wo

Re: [Bacula-users] autochanger woes

What is the output of the following command? lsscsi –g Patti Clark Linux System Administrator R&D Systems Support Oak Ridge National Laboratory From: RAT mailto:rober...@netzero.net>> Date: Thursday, September 18, 2014 at 5:43 PM To: "bacula-users@lists.sourceforge.net