Hi,
While console ACLs seem to work somehow, I could not find a way to limit
the destination when restoring a job. Well in my example below it uses
restore-my but still I can modify restore-my to restore to any directory I
want (and thus posing a problem if the machine is shared among users).
earlier in the build output :
cannot find -lstdc++
urpmi libstdc++5-static-devel solved the problem.
Le jeudi 12 mai 2005 à 10:35 +0200, le dahut a écrit :
Hi,
While trying to build bacula RPM from bacula-1.36.3-1.src.rpm downloaded
today, I got this error message :
make[1]: Leaving
Slartibartfast writes:
I have bacula 1.34.2 running as Director, Storage and Client on a Pent
IV 3Ghz running CentOS 3.4.
Did fill tests with an Overland LoaderXpress LTO2 drive. The drive
maxed at 27MB/s transfer rate.
Same drive connected to a Sun v240 running Solaris 9 got 15MB/s.
I am running bacula server on Solaris 9 Sparc. I downloaded the code
from blastwave.org and it is installed in /opt/csw/...
I share out /opt/csw to all our clients.
My question is can bacula work this way. /opt/csw has both the server
and client. Will this setup present any conflicts?
Thanks
I'm sure this is better at the list...
And I still don't see the output from ./configure.
If there isn't any output configure does not actually do anything, which
would, of course, be a problem itself, but until now I always got some
messages from configure.
Arno
Original Message
I want to stop some services before launching the backup, how can I make
RunBeforeJob and RunafterJob run on the client (not on the director) ?
---
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software
On Thu, 2005-05-12 at 05:19, Nicolai E M Plum wrote:
Slartibartfast writes:
I have bacula 1.34.2 running as Director, Storage and Client on a Pent
IV 3Ghz running CentOS 3.4.
Did fill tests with an Overland LoaderXpress LTO2 drive. The drive
maxed at 27MB/s transfer rate.
Same
I seem to be having problems with the restore using the directory tree.
Everytime I try to restore using the directory tree, I get the following
message,
for example.
Building directory tree for JobId 765 ...
1 Job, 0 files inserted into the tree.
0 files ??? impossible. I used the Enter a
I apologize for posting again, but just noticed that bextract has '-p' switch,
which I will try shortly and see what happens (will take a while
though :).
If you have any other suggestions (related to my previous mail), let me know.
Thanks once again.
Vanja
I know that the spool directory is safe to clear out when Bacula isn't
running, but what about the working directory?
Perhaps temporrary directory cleanouts should be added to the
startup/shutdown scripts. :)
---
This SF.Net email is
Hello,
I have a few questions whose answers I didnt
found in the documentation. Im sorry if they are there and I didnt
saw them.
- Is it possible to change the director configuration
with out restarting the services? Its annoying to have to stop long backups
to create a new job.
-
Slartibartfast I have bacula 1.34.2 running as Director, Storage and
Slartibartfast Client on a Pent IV 3Ghz running CentOS 3.4.
Slartibartfast Did fill tests with an Overland LoaderXpress LTO2
Slartibartfast drive. The drive maxed at 27MB/s transfer rate.
How did you do your fill tests? Just
On Thu, 2005-05-12 at 17:12 +0100, Nuno Jordo wrote:
snip
- Is it possible to change the director configuration with out
restarting the services? Its annoying to have to stop long backups to
create a new job.
Use the bconsole problem and type 'reload' at the prompt.
- Is there a way to
Can you use those includes for anything?
Meaning includes for jobs, clients, filesets?
-
Thank you,
Grant Della Vecchia
System Administrator
~
A I S M e d i a , I n c . - We Build eBusinesses
7000 Central Parkway, Suite 1700
Atlanta, GA 30328
Tel:
Hello,
I have Bacula configured on a Redhat Linux server with an SCSI attached
VXA 1x10 Autoloader (1 drive 10 slots).
My questions is how can I tell what tape it is going to use next, or can
I set the order, or does it just go sequentially?
-
Thank you,
Grant Della Vecchia
System Administrator
Hi,
Mathieu wrote:
I seem to be having problems with the restore using the directory tree.
Everytime I try to restore using the directory tree, I get the following
message,
for example.
Building directory tree for JobId 765 ...
1 Job, 0 files inserted into the tree.
Is it possible that the files
On Thu, 12 May 2005 14:05:30 -0400, Grant [EMAIL PROTECTED] said:
Grant Can you use those includes for anything?
Grant Meaning includes for jobs, clients, filesets?
Yes -- it is just textual insertion (like #include in C, except that the @
doesn't have to be at start of a line).
__Martin
17 matches
Mail list logo
