Hi,
do you have the vss service runing in administration tools ? (a service
called 'volume snapshot' or something like this ... i've a french version)
At 22:46 20/07/2005, you wrote:
Kern,
I did reboot the client. A test backup that I ran between the last email
and this one shows up in the
I, too, have received file-in-use errors while attempting to use VSS on two
different WinXP machines with the VSS FD. I will gladly post my configs
and messages if it will be helpful. I am running 1.37.30 SD & Dir and the
1.37.30 VSS FD and I do have "Enable VSS = yes" in the FileSet definatio
On 20 Jul 2005 at 22:44, Dan Langille wrote:
> On 20 Jul 2005 at 18:52, [EMAIL PROTECTED] wrote:
>
> > I wanted to upgrade from version 1.34.6 to 1.36.3 but
> > when I go to start bacula I get an error about my
> > PostgreSQL database configuration. It says something
> > about expected version 8
On 20 Jul 2005 at 18:52, [EMAIL PROTECTED] wrote:
> I wanted to upgrade from version 1.34.6 to 1.36.3 but
> when I go to start bacula I get an error about my
> PostgreSQL database configuration. It says something
> about expected version 8 but got 7 and terminates the
> init script for the bacula
On 20 Jul 2005 at 14:44, Joshua Kugler wrote:
> On Wednesday 20 July 2005 13:51, Marcel Gsteiger wrote:
> > What do you think about this?
>
> I think you didn't read the archives. :) This idea has been discussed, but
> it
> would take a lot of planning, and probably some structural changes. I
Hello,
Thanks for responding. Also, thanks for providing such a useful program!
Kern Sibbald wrote:
You should do three things:
1. Run btape "test" and "fill" commands. The latter is very slow.
I have done both but I don't see any critical errors. But then again,
maybe I am missing somethin
I wanted to upgrade from version 1.34.6 to 1.36.3 but
when I go to start bacula I get an error about my
PostgreSQL database configuration. It says something
about expected version 8 but got 7 and terminates the
init script for the bacula director. Normally I would
have just upgraded the database ho
Ok, I set everything up here at home and I'm getting the same thing. I
first tried backing up my laptop, which was the client I was testing
with at work, the "cannot open file" errors persisted. I then set up the
FD on another XP system I have here. Unfortunately it has the same
issue. Here's s
On Wednesday 20 July 2005 13:51, Marcel Gsteiger wrote:
> What do you think about this?
I think you didn't read the archives. :) This idea has been discussed, but it
would take a lot of planning, and probably some structural changes. It's an
idea that may be implemented some day, but as of rig
Hi all,
I am currently backing up several similar systems onto one volume, as probably
most people do. To save time and space, I have the following suggestion:
In principle it is unnecessary to store the same content twice on the same
volume. I assume that, during restore, a volume can either b
Kern,
I did reboot the client. A test backup that I ran between the last email and
this one shows up in the fd. When I get home tonight, I'll set everything up on
a server there and see if I have the same issue.
Thanks,
Thomas
>
> From: Kern Sibbald <[EMAIL PROTECTED]>
> Date: 2005/07/20 Wed P
On Wednesday 20 July 2005 21:59, [EMAIL PROTECTED] wrote:
> Kern,
> Thanks for your reply. I am using the VSS enabled FD. Here is the output
> from status client.
Well, something is obviously wrong because the FD reports that 0 jobs have run
since it was started. I recommend you run again, then
Kern,
Thanks for your reply. I am using the VSS enabled FD. Here is the output from
status client.
lightning:~# echo "status client=nemo-fd" | bconsole
Connecting to Director lightning:9101
1000 OK: lightning-dir Version: 1.37.30 (14 July 2005)
Enter a period to cancel a command.
status client=n
On Wednesday 20 July 2005 20:34, Arno Lehmann wrote:
> Hi,
>
> Kern Sibbald wrote:
> > On Wednesday 20 July 2005 16:27, Arno Lehmann wrote:
> >>Hello,
> >>
> >>the following has been discussed before. I was able to reproduce the
> >>following:
> >>
> >>I use a 6-slot autoloader.
> >>I have a query
On Wednesday 20 July 2005 19:33, [EMAIL PROTECTED] wrote:
> When backing up using VSS, is it normal to receive "cannot open file"
> messages?
No, you are probably not using the VSS enabled FD. Did you load
winbacula-vss-...? You can also tell by doing a status client=xxx
in the console. The si
Hi,
Kern Sibbald wrote:
On Wednesday 20 July 2005 16:27, Arno Lehmann wrote:
Hello,
the following has been discussed before. I was able to reproduce the
following:
I use a 6-slot autoloader.
I have a query to report which tapes are loaded in the slots.
I insert a magazine with six cartridge
I have ACL's working on our FreeBSD Server using Samba but when I
tried to backup and restore the files using Bacula I was unable to
restore the ACL's. When I investigated I discovered that Bacula
configured itself to have "ACL support: no". I compiled it from
soure using ports (bacula-1.36.2) The
On Wed, Jul 20, 2005, Michael 'buk' Scherer wrote:
> On Wed, 20 Jul 2005 - 12:14pm, Daniel Weuthen wrote:
>
> >> Just one quick they that jumped into my eye at first:
> >> Why do you use one pool for every day?
> >
> >Because that was why i concluded from the docs.
> >Do you replace the disk ever
When backing up using VSS, is it normal to receive "cannot open file" messages?
Thanks,
Thomas
Connecting to Director lightning:9101
1000 OK: lightning-dir Version: 1.37.30 (14 July 2005)
Enter a period to cancel a command.
messages
20-Jul 23:50 lightning-dir: No prior Full backup Job record foun
> Well, basically something is seriously wrong with your system...
Yeah. I tried mt -f /dev/st1 rewind again this morning and got "device busy"
instead of "no such device or address". So I re-started the server and now
everything is OK. Btape worked and as I type this, both drives are labeling n
On Wednesday 20 July 2005 17:07, Bernhard Suttner wrote:
> Thank you for your really nice help. I have made a really bad configuration
> mistake. now it works great!!!
Ah, good! Thanks for the feedback.
>
>
>
>
>
>
>
>
> On Mon, 18 Jul 2005 17:28:19 +0200
>
> Bernhard Suttner <[EMAIL PROTECTE
On Wednesday 20 July 2005 16:27, Arno Lehmann wrote:
> Hello,
>
> the following has been discussed before. I was able to reproduce the
> following:
>
> I use a 6-slot autoloader.
> I have a query to report which tapes are loaded in the slots.
> I insert a magazine with six cartridges and do 'update
Thanks Frederic,
That did the trick.
Thomas
>
> From: Frederic PIERROT <[EMAIL PROTECTED]>
> Date: 2005/07/20 Wed AM 10:46:19 EDT
> To: <[EMAIL PROTECTED]>
> CC: bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] Config error: Keyword EnableVSS not
> permitted in this resource
>
Thank you for your really nice help. I have made a really bad configuration
mistake. now it works great!!!
Greets,
Bernhard Suttner
On Mon, 18 Jul 2005 17:28:19 +0200
Bernhard Suttner <[EMAIL PROTECTED]> wrote:
> Bug report now available:
>
> http://bugs.bacula.org/bug_view_advanced_pag
At 16:33 20/07/2005, you wrote:
Hello everyone...again. I finally got bacula 1.37.30 compiled and running,
and I've successfully run a test backup of the server. After adding
"Enable VSS = yes" to a fileset resource, bacula-dir will no longer start
and I receive the error above. I was under th
Hello everyone...again. I finally got bacula 1.37.30 compiled and running, and
I've successfully run a test backup of the server. After adding "Enable VSS =
yes" to a fileset resource, bacula-dir will no longer start and I receive the
error above. I was under the impression that 1.37.30 had full
Hello,
the following has been discussed before. I was able to reproduce the
following:
I use a 6-slot autoloader.
I have a query to report which tapes are loaded in the slots.
I insert a magazine with six cartridges and do 'update slots scan
storage=HPDAT"
After that, the query correctly rep
Hello,
Beren Gamble wrote:
How do I make bacula place the next tape in the drive once it has filled
up the first tape? Can this be done automatically?
This is done automatically if you set up your SD and your DIR to use an
autochanger.
This is documented in the manual.
If, after fllowing
On Wed, 20 Jul 2005 - 12:14pm, Daniel Weuthen wrote:
>> Just one quick they that jumped into my eye at first:
>> Why do you use one pool for every day?
>
>Because that was why i concluded from the docs.
>Do you replace the disk every day?
>ours are permanantly mounted.
Yes we do, cause we use tape
How do I make bacula place the next tape in the drive once it has filled
up the first tape? Can this be done automatically?
Cheers,
Beren
**
The views expressed within this e-mail are those of the individual and not
necessaril
Hi,
Adrian Close wrote:
On Tue, 19 Jul 2005, Arno Lehmann wrote:
This might give problems with job promotion, I try to avoid that by
starting the affected backups by hand.
Yeah. So, my problem now becomes that promoted incrementals want to use
the storage device defined in the job overrid
> Just one quick they that jumped into my eye at first:
> Why do you use one pool for every day?
Because that was why i concluded from the docs.
Do you replace the disk every day?
ours are permanantly mounted.
> We do something very similar here, thats our pool for that:
>
> Pool {
> Name
Hello,
Richard White wrote:
I have some interesting problems with my tape drives. The Bacula system has three
"identical" drives: they are all VXA-1 drives. One is mounted interally and two
are in a RakPak, which is connected to the external SCSI bus. The ID of the internal
drive is 4 and th
On Wed, 20 Jul 2005 - 11:48am, Hendrik Weimer wrote:
>Daniel Weuthen <[EMAIL PROTECTED]> writes:
>
>> Pool {
>> Name = montag
>> Pool Type = Backup
>> Recycle = yes
>> Auto Prune = yes
>> Volume Retention = 6d
>> Accept Any Volume = yes
>> Maximum Volumes = 1
>> }
>
>You need to mark
Hi.
Just one quick they that jumped into my eye at first:
Why do you use one pool for every day?
We do something very similar here, thats our pool for that:
Pool {
Name = Daily
Pool Type = Backup
Recycle = yes
Recycle Current Volume = yes
AutoPrune = yes
Daniel Weuthen <[EMAIL PROTECTED]> writes:
> Pool {
> Name = montag
> Pool Type = Backup
> Recycle = yes
> Auto Prune = yes
> Volume Retention = 6d
> Accept Any Volume = yes
> Maximum Volumes = 1
> }
You need to mark the volume as used after all jobs have been written,
so it can be
Hello Bacula List,
before I start, let me say that I have read the manual chapters corosponding
to my problem over and over but in the end nothing worked as it should.
My Problem: I have seven harddisks, 250 GB each, which schould be used for a
daily full backup of a bunch of servers. I want to
Hello,
You should do three things:
1. Run btape "test" and "fill" commands. The latter is very slow.
2. Look at your system log to see if you are getting any errors.
3. Turn on the directive in the default SD config file that checks
for tape alerts. It can provide early warning if you ha
38 matches
Mail list logo
