Hi
At the Moment i try to configure a Bacula Backup Server.
When I label a tape with the bconsole i get the following error.:
3999 Device /dev/tape/by-id/scsi-3500e09e0001af92f-nst not found or
could not be opened
I have searched but not found a solution for my problem.
I have done a btape fill
Hi,
I installed bacula 5.0.2 using the mysql backend on ubuntu 10.10 using the
ubuntu repositories.
Everything went well. The databases were correctly setup. Testing shows
no problems:
,
| pma...@mietzekatze:~$ sudo bacula-dir -t -c /etc/bacula/bacula-dir.conf
| pma...@mietzekatze:~$ sudo
Why don't you use the classic /dev/nst0 device format in the Device section?
J.
2010/11/1 Rene Arnhold rene.arnh...@jena.de:
Hi
At the Moment i try to configure a Bacula Backup Server.
When I label a tape with the bconsole i get the following error.:
3999 Device
Thanks for response.
Because the the link /dev/tape/by-id/scsi-3500e09e0001af92f-nst is static.
When you change something in yout SCSI configuration the devicefile /dev/nstX
could be changed and you have to change your config. The symlinks /dev/tape/by*
(or /dev/disk/by-* for hard drives) are
Hi, I am running a job to backup all my system in order to preapre a full
backup for disaster recovery.
In the job log, I see the following
Using Device FileStorage
2010-11-01 10:49:46 bacula-sd Labeled new Volume DRLocal0016 on device
FileStorage (/media/Backup).
On 11/01/10 07:19, eliassal wrote:
Hi, I am running a job to backup all my system in order to preapre a full
backup for disaster recovery.
In the job log, I see the following
Using Device FileStorage
2010-11-01 10:49:46 bacula-sd Labeled new Volume DRLocal0016 on device
FileStorage
Dan Langille schrieb:
Over the past few days, I've become increasingly impatient and
frustrated by posts that break threading. That is, posts that lack the
headers necessary for properly threading of emails. Specifically, the
References: and In-Reply-To: headers are not being preserved.
Am 01.11.2010 12:19, schrieb eliassal:
Hi, I am running a job to backup all my system in order to preapre a full
backup for disaster recovery.
In the job log, I see the following
Using Device FileStorage
2010-11-01 10:49:46 bacula-sd Labeled new Volume DRLocal0016 on device
FileStorage
'Ondrej PLANKA (Ignum profile)' wrote:
Thanks :)
Which type of MySQL storage engine are you using? MyISAM or InnoDB for
large Bacula system?
Can you please copy/paste your MySQL configuration? I mean my.cnf file
Please re-read this thread and you should find what you are looking for.
Thanks,
On Mon, Oct 25, 2010 at 1:01 PM, Bob Hetzel b...@case.edu wrote:
From: Brian Blater brb.li...@gmail.com
Two things that are odd... you're including c:/documents and settings but
then excluding c:/temp, that's just unhelpful. My approach is a little
different--tell it to back up c:/ and then
My apologies for thread-jacking; I was mislead into bad netiquette by the
fundamental problem being the same.
+--
|This was sent by catki...@yahoo.co.uk via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Here's a bash-with-embedded awk scrippet that parses Bacula .conf files. I
don't know if it works with all possible permutations of .conf file layout
(it's only tested on my own). It uses supporting functions ck_file, finalise
and msg but they only do the obvious and are not significant in
On Mon, 01 Nov 2010 09:04:13 +0100, Rene Arnhold said:
When I label a tape with the bconsole i get the following error.:
3999 Device /dev/tape/by-id/scsi-3500e09e0001af92f-nst not found or
could not be opened
...
bacula-dir.conf:
###
Am Mon, 01 Nov 2010 06:15:18 +0100 schrieb Ondrej PLANKA (Ignum profile):
Thanks :)
Which type of MySQL storage engine are you using? MyISAM or InnoDB for
large Bacula system?
Can you please copy/paste your MySQL configuration? I mean my.cnf file
Thanks, Ondrej.
I would use InnoDB.
a
This should be Device = sdlt1600 to match the Device Name in the
bacula-sd.conf.
This was the solution.
Device here means devicename in storage daemon and not devicefile.
Many thanks Martin.
+--
|This was sent by
On Sat, 30 Oct 2010 12:33:22 -0400, Dan Langille said:
On 10/27/2010 12:05 PM, catkins wrote:
catkins wrote:
Thanks Martin :-)
[snip]
Have downloaded your patch and will try using it this evening (on
Slackware64 13.1) [snip] building from bacula-5.0.3.tar.gz [snip]
Thank you
Hello :)
On a new installation of 5.0.3 with .conf files copied from a working 5.0.1
installation. MySQL 5.1.46. Slackware64 13.1.
From the log
24-Oct 18#58;45 bacula-dir JobId 0#58; Fatal error#58; Could not open
Catalog MyCatalog, database bacula.
24-Oct 18#58;45 bacula-dir JobId 0#58;
Hello :)
On a new installation of 5.0.3 with .conf files copied from a working 5.0.1
installation. MySQL 5.1.46. Slackware64 13.1.
From the log
24-Oct 18#58;45 bacula-dir JobId 0#58; Fatal error#58; Could not open
Catalog MyCatalog, database bacula.
24-Oct 18#58;45 bacula-dir JobId 0#58;
On Mon, Nov 1, 2010 at 11:07 AM, catkins bacula-fo...@backupcentral.com wrote:
Hello :)
On a new installation of 5.0.3 with .conf files copied from a working 5.0.1
installation. MySQL 5.1.46. Slackware64 13.1.
From the log
24-Oct 18#58;45 bacula-dir JobId 0#58; Fatal error#58; Could not
drescherjm wrote:
[snip quote]
Although this is very hard to read on the mailing list your problem
may be that mysql is not listening on the network interface.
John
--
Nokia and ATT present the 2010 Calling
Ok when people will stop posting html converted perhaps we will try to read
their demand.
On 11/01/2010 02:58 PM, catkins wrote:
Here's a bash-with-embedded awk scrippet that parses Bacula .conf files. I
don't know if it works with all possible permutations of .conf file layout
(it's
Thanks for your very quick reply John :)
I'm sorry it was hard to read on the mailing list; I thought I was being
helpful using code tags.
If I understand correctly that it is the port statements in my.cnf that
define where MySQL listens, this (no code tags!) shows where MySQL is
On Mon, Nov 1, 2010 at 11:39 AM, Bruno Friedmann br...@ioda-net.ch wrote:
Ok when people will stop posting html converted perhaps we will try to read
their demand.
The problem is posts from the backup central forums
Hi, I tried to follow your instructions but getting the following error
.. the backup job is now running. When complete, the results will be shown
below ..
01-Nov 16:45 bacula-dir JobId 17: Start Backup JobId 17,
Job=jobFC13OnIomega1.2010-11-01_16.45.24_06
01-Nov 16:45 bacula-sd JobId
On Mon, 1 Nov 2010 11:54:05 -0400, John Drescher said:
The problem is posts from the backup central forums
http://www.backupcentral.com/phpBB2/two-way-mirrors-of-external-mailing-lists-3/bacula-25/
for some reason are sent to the mailing list as text but have html
codes in them. This
On Mon, Nov 1, 2010 at 06:42, Ralf Gross ralf-li...@ralfgross.de wrote:
Dan Langille schrieb:
Over the past few days, I've become increasingly impatient and
frustrated by posts that break threading. That is, posts that lack the
headers necessary for properly threading of emails.
On 11/01/10 11:58, eliassal wrote:
Hi, I tried to follow your instructions but getting the following error
.. the backup job is now running. When complete, the results will be shown
below ..
01-Nov 16:45 bacula-dir JobId 17: Start Backup JobId 17,
27 matches
Mail list logo