Hello,
I think the whole webacula folder has nothing to do in /var/www
/usr/share is better... then you can configure Apache configuration files:
ln -s /usr/share/webacula/install/apache/webacula.conf /etc/apache2/conf.d/
I think you should have installed Zend framework with aptitude, too...
Gentlebeings
I have a small server running Ubuntu Lucid, on which I have installed Webmin
1.550 and Bacula 5.0.1 and MySQL (applications installed using apt-get). I am
backing up to a file share on another machine, and the set up basically works.
I still need to fine tune a few things, but I
Hi,
W dniu 25 maja 2011 16:35 użytkownik Hugo Letemplier
hugo.let...@gmail.comnapisał:
console:
* purge volume action=all allpools storage=yourstorage-sd
If you updated your volumes parameters then execute following command in
Are you sure this command will purge all my volumes ? I have
Hi Davide.
A change of the host parameter to 127.0.0.1 has the same effect with the
same error message.
Here the mysql variant:
[root@CBCK0001 ~]# mysql -u bacula -h 192.168.100.93 -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id
the scripts are contained into the bacula-director-mysql package
at least on debian squeeze, ubuntu I think uses the same debian basis
for this kind of packages,
for this reason I suggest to use debian instead of ubuntu at least on
server side.
good luck
Mauro
Hi,
I'd like to share a tip about shutting down a windows client after
its backuò job has finished.
Nothing spectacular, but I guessed somebody would find it useful.
1) Create a batch file with a suitable name, e.g. C:\shutdown.bat
2) Put this single line in it:
shutdown -s -t 0
which
Am 26.05.2011 09:23, schrieb Marcello Romani:
Hi,
I'd like to share a tip about shutting down a windows client after
its backuò job has finished.
Nothing spectacular, but I guessed somebody would find it useful.
1) Create a batch file with a suitable name, e.g. C:\shutdown.bat
2) Put
Hi Everyone,
I have a backup server that is running on Debian Etch 4.0.
I have bacula version 2.4.2 installed, and working with a HP 1/8 Ultrium 920
G2 Autoloader, with Ultrium-3 tapes.
However, the Autoloader has spoilt, and I am looking to setup a new tape
system for me backup server.
On Thu, 26 May 2011 09:23:22 +0200
Marcello Romani mrom...@ottotecnica.com wrote:
I'd like to share a tip about shutting down a windows client
after its backuò job has finished.
Nothing spectacular, but I guessed somebody would find it useful.
1) Create a batch file with a suitable name,
Il 26/05/2011 09:51, J. Echter ha scritto:
Am 26.05.2011 09:23, schrieb Marcello Romani:
Hi,
I'd like to share a tip about shutting down a windows client after
its backuò job has finished.
Nothing spectacular, but I guessed somebody would find it useful.
1) Create a batch file with a
Il 26/05/2011 11:00, Konstantin Khomoutov ha scritto:
On Thu, 26 May 2011 09:23:22 +0200
Marcello Romanimrom...@ottotecnica.com wrote:
I'd like to share a tip about shutting down a windows client
after its backuò job has finished.
Nothing spectacular, but I guessed somebody would find it
Il 26/05/2011 09:23, Marcello Romani ha scritto:
Hi,
I'd like to share a tip about shutting down a windows client after
its backuò job has finished.
Nothing spectacular, but I guessed somebody would find it useful.
1) Create a batch file with a suitable name, e.g. C:\shutdown.bat
2)
On Thu, 26 May 2011 16:48:16 +1000
Melodie Neal melodie.n...@gmail.com wrote:
I have a small server running Ubuntu Lucid, on which I have installed
Webmin 1.550 and Bacula 5.0.1 and MySQL (applications installed using
apt-get). I am backing up to a file share on another machine, and
the set
On Thu, 26 May 2011 09:24:39 +0200
Mauro Colorio mauro.colo...@gmail.com wrote:
the scripts are contained into the bacula-director-mysql package
at least on debian squeeze, ubuntu I think uses the same debian basis
for this kind of packages,
for this reason I suggest to use debian instead of
John Drescher wrote:
I'm trying to restore a 3 month old backup, but the database says there
are no files to restore.
The strange thing is, I can _see_ the entries in the database for that
date and the full backup 10 days before.
Has anyone seen this kind of behaviour?
Do you have
On Thu, May 26, 2011 at 11:43:16AM +0100, Alan Brown wrote:
John Drescher wrote:
I'm trying to restore a 3 month old backup, but the database says there
are no files to restore.
The strange thing is, I can _see_ the entries in the database for that
date and the full backup 10 days
Hi Davide.
No I changed the host parameter back to 192.168.100.93 and did the good
old
System restart and now the error message won't come but I run in another
problem
But for this I will start a new thread.
Br Robert
From: Robert Kromoser
Sent: Donnerstag, 26. Mai 2011 09:17
To:
Hi folks.
Of course the apache server is running and bacula server (fd,sd,dir) is
running.
When I call the URL http://cbck0001.kinamu.local/bacula-web
http://cbck0001.kinamu.local/bacula-web
I see for a very short time connecting then I see done in the status
line
but the screen leaves
Hi folks.
I found the following mistakes.
The parameter host must not be the real IP-Address of the host.
In my configuration it was
host = 192.168.100.93
That is wrong.
The try with
host = 127.0.0.1
brought the same error.
Only
host = localhost
works fine.
I am backing up 7 servers in daily basis, one of the servers take 5
hours to backup (the other 6 take 2 hours), so i want to backup the
large server at the same time i am backuping the others servers.
I have one LTO4 drive, and the backups are running secuencially, one
after another from
I am backing up 7 servers in daily basis, one of the servers take 5
hours to backup (the other 6 take 2 hours), so i want to backup the
large server at the same time i am backuping the others servers.
I have one LTO4 drive, and the backups are running secuencially, one
after another from
Hello,
I know this might have been asked millions of times before, but I cannot
seem to locate clear information via the archives or the official
documentation and I feel I am almost there.
From what I have understood, the Exchange plugin is basically that
exchange-fd.dll file. The first
I am in charge of setting up the backups of a small office of around
10 people. About 6 are on on the same LAN as the server so bandwidth
is not a problem. However, the rest are road warriors and their
backups may take quite a bit more time... I am looking at asking them
to leave their laptops on
On Thu, May 26, 2011 at 01:50:39PM +0100, Marc Goujon wrote:
Hello,
I know this might have been asked millions of times before, but I cannot
seem to locate clear information via the archives or the official
documentation and I feel I am almost there.
From what I have understood, the
Thanks for replying John.
Well, because of your advice i have changed Storage part of bacula-dir
to 2 maximum Jobs, thanks for that.
I have also realized that having differents priorities on jobs avoid
them to run concurrently, so i have put the same priority to all the
jobs in this case 1 for
Hi!
I'd like to know whether anybody has had any Bacula experience with this
media:
HP StorageWorks DAT 320 USB Internal Tape Drive AJ825A
We are planning to buy one and would like to be sure it will work with
Bacula (On a Linux or a BSD).
The Bacula Wiki mentions one, but it is a
On Thu, 26 May 2011 08:19:00 -0500
Jake Debord jake.deb...@gmail.com wrote:
I am in charge of setting up the backups of a small office of around
10 people. About 6 are on on the same LAN as the server so bandwidth
is not a problem. However, the rest are road warriors and their
backups may
2011/5/26 Radosław Korzeniewski rados...@korzeniewski.net:
Hi,
W dniu 25 maja 2011 16:35 użytkownik Hugo Letemplier hugo.let...@gmail.com
napisał:
console:
* purge volume action=all allpools storage=yourstorage-sd
If you updated your volumes parameters then execute following command in
Hello,
You should use credentials you provided into config.ini.
That should do the trick.
Then you will be able to add some accounts.
HTH.
Jérôme Blion.
On Thu, 26 May 2011 15:20:53 +0200, AliKate AliKatador
alikata...@gmail.com wrote:
Hello:
Now I'm NEAR :D:D:D
I install the Zend
Do you have different file and job retentions?
Just to clarify this - I can see the _files_ in the database when I look
at the files in the JobId of the full backup, but when I go to do a
restore it says no files are available.
Perhaps the problem could be something to do with the Full
Hi there,
I was just looking at the following documentation page:
http://www.bacula.org/en/dev-manual/main/main/Data_Encryption.html
That page contains information about generating a master key and then also a
set of client keys. However, the page is not clear whether you're supposed
to use
On Thu, May 26, 2011 at 03:55:41PM +0100, Marc Goujon wrote:
a) I think you should only use forward slashes ('/') in your filesets, not
backslashes.
Replaced all paths for forward slashes.
However, exactly the same results are obtained. Bak to my original
question, is the bpipe plugin
My goal is to have a backup job per employee. Each employee will have
their own Pool and volume.
My problem is that while testing the backups work fine, except the
volume just keeps growing and growing.
I have set the max volume size to 12G. The current file size is now
16G. I have also set the
Am 26.05.2011 17:24, schrieb Tim Gustafson:
Hi there,
I was just looking at the following documentation page:
http://www.bacula.org/en/dev-manual/main/main/Data_Encryption.html
That page contains information about generating a master key and then also
a set of client keys. However,
On 5/26/2011 2:48 AM, Melodie Neal wrote:
Gentlebeings
I have a small server running Ubuntu Lucid, on which I have installed
Webmin 1.550 and Bacula 5.0.1 and MySQL (applications installed using
apt-get). I am backing up to a file share on another machine, and the
set up basically works. I
Hello,
I've got a very large backup set (55M files, 1TB of data) that's
simply not backing up. This is always the failure message:
26-May 16:35 buny1-dir JobId 5223: Fatal error: Network error with FD
during Backup: ERR=Connection timed out
26-May 16:35 buny1-dir JobId 5223: Fatal error: No Job
have you update your volume?
isn't enough to make changes in the config file, use update volume
command from bconsole
ciao
Mauro
--
vRanger cuts backup time in half-while increasing security.
With the market-leading
Hello everybody, if you need to restore a full jobid and some incremental
but not all, as could be done via the console, for a given jobid
restore a specific
server and all incremental, one at a time, ie, in order, seems too much work,
so what would be the quickest way?
Thanks.
--
Cleuson de
On Thu, May 26, 2011 at 07:24:57PM -0300, Cleuson Alves wrote:
Hello everybody, if you need to restore a full jobid and some incremental
but not all, as could be done via the console, for a given jobid
restore a specific
server and all incremental, one at a time, ie, in order, seems too much
c) Be very very careful with this. I believe that the plugin doesn't
work
properly. Specifically, it will restore from:
* A full backup
* A full backup, plus one incremental.
But then it may not restore from:
* A full backup, plus two incrementals.
And be less and less likely
40 matches
Mail list logo