date:20160722

Re: [Bacula-users] problem drive bacula

2016-07-22 Thread Clark, Patti

Nirvana,

The tapes will rewind whenever they are ejected from the drive.  Bacula will 
manage the tapes as needed.  Auto-rewinding is unnecessary with modern backup 
software management particularly with an autochanger.

Patti

From: nirvana 
Reply-To: "bacula-users@lists.sourceforge.net" 

Date: Friday, July 22, 2016 at 2:31 PM
To: "bacula-users@lists.sourceforge.net" 
Subject: [Bacula-users] problem drive bacula

Thank you for responding Patti.

I was reading about udev, but I say that the fastest way is to use the long 
form, in my case is / dev / changer but as you say it put me not to rewind the 
tape?

+--
|This was sent by nirvana...@hotmail.com via 
Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users


--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] problem drive bacula

2016-07-22 Thread nirvana

Thank you for responding Patti.

I was reading about udev, but I say that the fastest way is to use the long 
form, in my case is / dev / changer but as you say it put me not to rewind the 
tape?

+--
|This was sent by nirvana...@hotmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] problema para reconocer dispositivos libreria hp msl2024

2016-07-22 Thread Josh Fisher



On 7/22/2016 11:13 AM, nirvana wrote:
> Buen dia, Estimados
>
> Estoy instalando Bacula y ya habia realizado pruebas de de respaldo full, 
> incremental y diferencial, pero la libreria tuvo un problema y reinicie el 
> servidor de bacula, pero cuando hago un lsscsi resulta que se ha movido la 
> posicion en el dev donde se montaba, en fin que buscando por internet 
> encontre un script para que al inicie lo monte en Changer Device = 
> /dev/changer y fino pero ahora no funciona los  Archive Device = /dev/st0 de 
> cada drive y antes si funcionaba cuando intento hacer un test me dice que no 
> se puede encontrar el medio que puede ser? alguna idea por favor:

Se necesitan reglas de udev para establcer una asignacion de dispositivo 
estatico. Google para el dispositivo estatica udev.

>
> este es parte del bacula-sd.conf
>
> Autochanger {
>Name = Autochanger
>Device = Drive-0
>Device = Drive-1
>Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
>Changer Device = /dev/changer
> }
> Device {
>Name = Drive-0
>Drive Index = 0
>Media Type = LTO-6
>Archive Device = /dev/st0
>AutomaticMount = yes;
>AlwaysOpen = yes;
>RemovableMedia = yes;
>Random Access = no;
>Autochanger = yes;
>Maximum Spool Size = 8G
> }
> Device {
>Name = Drive-1
>Drive Index = 1
>Media Type = LTO-6
>   Archive Device = /dev/st1
>AutomaticMount = yes;
>AlwaysOpen = yes;
>RemovableMedia = yes;
>Random Access = no;
>Autochanger = yes;
>Maximum Spool Size = 8G
> }
> Messages {
>Name = Standard
>director = srvbacula-dir = all
> }
>
>
> y este es el error que me da cuando hago un btape
> root@srvbacula:/dev# btape Drive-0
> Tape block granularity is 1024 bytes.
> btape: butil.c:291-0 Using device: "Drive-0" for writing.
> btape: Fatal Error at device.c:300 because:
> dev open failed: tape_dev.c:164 Unable to open device "Drive-0" (/dev/st0): 
> ERR=No se ha encontrado el medio
>
> 22-jul 11:08 btape: Fatal Error at device.c:300 because:
> dev open failed: tape_dev.c:164 Unable to open device "Drive-0" (/dev/st0): 
> ERR=No se ha encontrado el medio
>
> btape: butil.c:199-0 Cannot open "Drive-0" (/dev/st0)
> 22-jul 11:08 btape JobId 0: Fatal error: butil.c:199 Cannot open "Drive-0" 
> (/dev/st0)
>
> y este es el status del changer
>
> root@srvbacula:/dev# mtx -f /dev/changer status
>Storage Changer /dev/changer:2 Drives, 24 Slots ( 0 Import/Export )
> Data Transfer Element 0:Empty
> Data Transfer Element 1:Empty
>Storage Element 1:Full :VolumeTag=VXS001L6
>Storage Element 2:Full :VolumeTag=VXS002L6
>Storage Element 3:Full :VolumeTag=VXS003L6
>Storage Element 4:Full :VolumeTag=VXS004L6
>Storage Element 5:Full :VolumeTag=VXS005L6
>Storage Element 6:Full :VolumeTag=VXS006L6
>Storage Element 7:Full :VolumeTag=VXS007L6
>Storage Element 8:Full :VolumeTag=VXS008L6
>Storage Element 9:Full :VolumeTag=VXS009L6
>Storage Element 10:Full :VolumeTag=VXS010L6
>Storage Element 11:Full :VolumeTag=VXS011L6
>Storage Element 12:Full :VolumeTag=VXS012L6
>Storage Element 13:Full :VolumeTag=VXS013L6
>Storage Element 14:Full :VolumeTag=VXS014L6
>Storage Element 15:Full :VolumeTag=VXS015L6
>Storage Element 16:Full :VolumeTag=VXS016L6
>Storage Element 17:Full :VolumeTag=VXS017L6
>Storage Element 18:Full :VolumeTag=VXS018L6
>Storage Element 19:Full :VolumeTag=VXS019L6
>Storage Element 20:Full :VolumeTag=VXS020L6
>Storage Element 21:Full :VolumeTag=VXS021L6
>Storage Element 22:Full :VolumeTag=VXS022L6
>Storage Element 23:Full :VolumeTag=VXS023L6
>Storage Element 24:Full
>
> este es el lsscsi -g
> [1:0:0:0]tapeHP   Ultrium 6-SCSI   252W  /dev/st0   /dev/sg7
> [1:0:0:1]mediumx HP   MSL G3 Series6.20  /dev/sch0  /dev/sg8
> [3:0:0:0]cd/dvd  MATSHITA UJDA780 DVD/CDRW CA22  /dev/sr0   /dev/sg9
> [5:0:0:0]tapeHP   Ultrium 6-SCSI   252W  /dev/st1   /dev/sg10
>
> ayuda por favor.
>
> +--
> |This was sent by nirvana...@hotmail.com via Backup Central.
> |Forward SPAM to ab...@backupcentral.com.
> +--
>
>
>
> --
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and protocols are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity planning
> reports.http://sdm.link/zohodev2dev
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] problem drive bacula

2016-07-22 Thread Clark, Patti

You need to read up on udev.  I have posted several times on this list 
regarding the commands and configuration using udev rules.  Search the list for 
the information.   Otherwise, use the long path /dev/tape/by-path/… which is an 
ugly reference but is stable on reboots.  Use the “nst#” reference – it means 
no rewind, otherwise your tapes will rewind after each use by default.

Patti

From: nirvana 
Reply-To: "bacula-users@lists.sourceforge.net" 

Date: Friday, July 22, 2016 at 11:20 AM
To: "bacula-users@lists.sourceforge.net" 
Subject: [Bacula-users] problem drive bacula

Good day, Dear

I am installing Bacula and had already done tests of full, incremental and 
differential backup, but the library had a problem and restart the server 
bacula, but when I do a lsscsi it that has moved the position in the dev where 
it was mounted in so that searching the internet I found a script for the start 
mount it in Changer Device = / dev / changer and fine but the Archive Device = 
/ dev / st0 each drive now does not work and before if it worked when I try to 
make a test tells me you can not find the medium that can be? any ideas please:

This is part of bacula-sd.conf

autochanger {
  Name = Autochanger
  Drive-device = 0
  Device = Drive-1
  Changer Command = "/ etc / bacula / mtx-changer% c% or% S% a% d"
  Changer Device = / dev / changer
}
Device {
  Drive-Name = 0
  Drive Index = 0
  Media Type = LTO-6
  Archive Device = / dev / st0
  AutomaticMount = yes;
  AlwaysOpen = yes;
  RemovableMedia = yes;
  Random Access = no;
  Autochanger = yes;
  Maximum Spool Size = 8G
}
Device {
  Name = Drive-1
  Drive Index = 1
  Media Type = LTO-6
 Archive Device = / dev / st1
  AutomaticMount = yes;
  AlwaysOpen = yes;
  RemovableMedia = yes;
  Random Access = no;
  Autochanger = yes;
  Maximum Spool Size = 8G
}
Messages {
  Name = Standard
  Director = srvbacula-dir = all
}


and this is the error that appears when I run a btape

root @ srvbacula: / dev # btape Drive-0
Tape block granularity is 1024 bytes.
btape: butil.c: 291-0 Using device: "Drive-0" for writing.
btape: Fatal Error at device.c: 300 because:
dev open failed: tape_dev.c: 164 Unable to open device "Drive-0" (/ dev / st0): 
ERR = Not found the average

Jul 22 11:08 btape: Fatal Error at device.c: 300 because:
dev open failed: tape_dev.c: 164 Unable to open device "Drive-0" (/ dev / st0): 
ERR = Not found the average

btape: butil.c: 199-0 Can not open "Drive-0" (/ dev / st0)
Jul 22 11:08 btape JobId 0: Fatal error: butil.c: 199 Can not open "Drive-0" (/ 
dev / st0)

and this is the status of the changer

root @ srvbacula: / dev # mtx -f / dev / changer status
  Storage Changer / dev / changer: 2 Drives 24 Slots (0 Import / Export)
Data Transfer Element 0: Empty
Data Transfer Element 1: Empty
  Storage Element 1: Full: VolumeTag = VXS001L6
  Storage Element 2: Full: VolumeTag = VXS002L6
  Storage Element 3: Full: VolumeTag = VXS003L6
  Storage Element 4: Full: VolumeTag = VXS004L6
  Storage Element 5: Full: VolumeTag = VXS005L6
  Storage Element 6: Full: VolumeTag = VXS006L6
  Storage Element 7: Full: VolumeTag = VXS007L6
  Storage Element 8: Full: VolumeTag = VXS008L6
  Storage Element 9: Full: VolumeTag = VXS009L6
  Storage Element 10: Full: VolumeTag = VXS010L6
  Storage Element 11: Full: VolumeTag = VXS011L6
  Storage Element 12: Full: VolumeTag = VXS012L6
  Storage Element 13: Full: VolumeTag = VXS013L6
  Storage Element 14: Full: VolumeTag = VXS014L6
  Storage Element 15: Full: VolumeTag = VXS015L6
  Storage Element 16: Full: VolumeTag = VXS016L6
  Storage Element 17: Full: VolumeTag = VXS017L6
  Storage Element 18: Full: VolumeTag = VXS018L6
  Storage Element 19: Full: VolumeTag = VXS019L6
  Storage Element 20: Full: VolumeTag = VXS020L6
  Storage Element 21: Full: VolumeTag = VXS021L6
  Storage Element 22: Full: VolumeTag = VXS022L6
  Storage Element 23: Full: VolumeTag = VXS023L6
  Storage Element 24: Full

this is the lsscsi -g
[1: 0: 0: 0] HP Ultrium tape SCSI 6-252W / dev / st0 / dev / SG7
[1: 0: 0: 1] HP MSL G3 Series mediumx 6.20 / dev / sch0 / dev / SG8
[3: 0: 0: 0] cd / dvd MATSHITA UJDA780 DVD / CDRW CA22 / dev / sr0 / dev / SG9
[5: 0: 0: 0] HP Ultrium tape SCSI 6-252W / dev / st1 / dev / sg10

please help.

+--
|This was sent by nirvana...@hotmail.com via 
Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--




--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols

[Bacula-users] problem drive bacula

2016-07-22 Thread nirvana

Good day, Dear

I am installing Bacula and had already done tests of full, incremental and 
differential backup, but the library had a problem and restart the server 
bacula, but when I do a lsscsi it that has moved the position in the dev where 
it was mounted in so that searching the internet I found a script for the start 
mount it in Changer Device = / dev / changer and fine but the Archive Device = 
/ dev / st0 each drive now does not work and before if it worked when I try to 
make a test tells me you can not find the medium that can be? any ideas please:

This is part of bacula-sd.conf

autochanger {
  Name = Autochanger
  Drive-device = 0
  Device = Drive-1
  Changer Command = "/ etc / bacula / mtx-changer% c% or% S% a% d"
  Changer Device = / dev / changer
}
Device {
  Drive-Name = 0
  Drive Index = 0
  Media Type = LTO-6
  Archive Device = / dev / st0
  AutomaticMount = yes;
  AlwaysOpen = yes;
  RemovableMedia = yes;
  Random Access = no;
  Autochanger = yes;
  Maximum Spool Size = 8G
}
Device {
  Name = Drive-1
  Drive Index = 1
  Media Type = LTO-6
 Archive Device = / dev / st1
  AutomaticMount = yes;
  AlwaysOpen = yes;
  RemovableMedia = yes;
  Random Access = no;
  Autochanger = yes;
  Maximum Spool Size = 8G
}
Messages {
  Name = Standard
  Director = srvbacula-dir = all
}


and this is the error that appears when I run a btape

root @ srvbacula: / dev # btape Drive-0
Tape block granularity is 1024 bytes.
btape: butil.c: 291-0 Using device: "Drive-0" for writing.
btape: Fatal Error at device.c: 300 because:
dev open failed: tape_dev.c: 164 Unable to open device "Drive-0" (/ dev / st0): 
ERR = Not found the average

Jul 22 11:08 btape: Fatal Error at device.c: 300 because:
dev open failed: tape_dev.c: 164 Unable to open device "Drive-0" (/ dev / st0): 
ERR = Not found the average

btape: butil.c: 199-0 Can not open "Drive-0" (/ dev / st0)
Jul 22 11:08 btape JobId 0: Fatal error: butil.c: 199 Can not open "Drive-0" (/ 
dev / st0)

and this is the status of the changer

root @ srvbacula: / dev # mtx -f / dev / changer status
  Storage Changer / dev / changer: 2 Drives 24 Slots (0 Import / Export)
Data Transfer Element 0: Empty
Data Transfer Element 1: Empty
  Storage Element 1: Full: VolumeTag = VXS001L6
  Storage Element 2: Full: VolumeTag = VXS002L6
  Storage Element 3: Full: VolumeTag = VXS003L6
  Storage Element 4: Full: VolumeTag = VXS004L6
  Storage Element 5: Full: VolumeTag = VXS005L6
  Storage Element 6: Full: VolumeTag = VXS006L6
  Storage Element 7: Full: VolumeTag = VXS007L6
  Storage Element 8: Full: VolumeTag = VXS008L6
  Storage Element 9: Full: VolumeTag = VXS009L6
  Storage Element 10: Full: VolumeTag = VXS010L6
  Storage Element 11: Full: VolumeTag = VXS011L6
  Storage Element 12: Full: VolumeTag = VXS012L6
  Storage Element 13: Full: VolumeTag = VXS013L6
  Storage Element 14: Full: VolumeTag = VXS014L6
  Storage Element 15: Full: VolumeTag = VXS015L6
  Storage Element 16: Full: VolumeTag = VXS016L6
  Storage Element 17: Full: VolumeTag = VXS017L6
  Storage Element 18: Full: VolumeTag = VXS018L6
  Storage Element 19: Full: VolumeTag = VXS019L6
  Storage Element 20: Full: VolumeTag = VXS020L6
  Storage Element 21: Full: VolumeTag = VXS021L6
  Storage Element 22: Full: VolumeTag = VXS022L6
  Storage Element 23: Full: VolumeTag = VXS023L6
  Storage Element 24: Full

this is the lsscsi -g
[1: 0: 0: 0] HP Ultrium tape SCSI 6-252W / dev / st0 / dev / SG7
[1: 0: 0: 1] HP MSL G3 Series mediumx 6.20 / dev / sch0 / dev / SG8
[3: 0: 0: 0] cd / dvd MATSHITA UJDA780 DVD / CDRW CA22 / dev / sr0 / dev / SG9
[5: 0: 0: 0] HP Ultrium tape SCSI 6-252W / dev / st1 / dev / sg10

please help.

+--
|This was sent by nirvana...@hotmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] problema para reconocer dispositivos libreria hp msl2024

2016-07-22 Thread nirvana

Buen dia, Estimados

Estoy instalando Bacula y ya habia realizado pruebas de de respaldo full, 
incremental y diferencial, pero la libreria tuvo un problema y reinicie el 
servidor de bacula, pero cuando hago un lsscsi resulta que se ha movido la 
posicion en el dev donde se montaba, en fin que buscando por internet encontre 
un script para que al inicie lo monte en Changer Device = /dev/changer y fino 
pero ahora no funciona los  Archive Device = /dev/st0 de cada drive y antes si 
funcionaba cuando intento hacer un test me dice que no se puede encontrar el 
medio que puede ser? alguna idea por favor:

este es parte del bacula-sd.conf

Autochanger {
  Name = Autochanger
  Device = Drive-0
  Device = Drive-1
  Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
  Changer Device = /dev/changer
}
Device {
  Name = Drive-0
  Drive Index = 0
  Media Type = LTO-6
  Archive Device = /dev/st0
  AutomaticMount = yes;
  AlwaysOpen = yes;
  RemovableMedia = yes;
  Random Access = no;
  Autochanger = yes;
  Maximum Spool Size = 8G
}
Device {
  Name = Drive-1
  Drive Index = 1
  Media Type = LTO-6
 Archive Device = /dev/st1
  AutomaticMount = yes; 
  AlwaysOpen = yes;
  RemovableMedia = yes;
  Random Access = no;
  Autochanger = yes;
  Maximum Spool Size = 8G
}
Messages {
  Name = Standard
  director = srvbacula-dir = all
}


y este es el error que me da cuando hago un btape
root@srvbacula:/dev# btape Drive-0
Tape block granularity is 1024 bytes.
btape: butil.c:291-0 Using device: "Drive-0" for writing.
btape: Fatal Error at device.c:300 because:
dev open failed: tape_dev.c:164 Unable to open device "Drive-0" (/dev/st0): 
ERR=No se ha encontrado el medio

22-jul 11:08 btape: Fatal Error at device.c:300 because:
dev open failed: tape_dev.c:164 Unable to open device "Drive-0" (/dev/st0): 
ERR=No se ha encontrado el medio

btape: butil.c:199-0 Cannot open "Drive-0" (/dev/st0)
22-jul 11:08 btape JobId 0: Fatal error: butil.c:199 Cannot open "Drive-0" 
(/dev/st0)

y este es el status del changer

root@srvbacula:/dev# mtx -f /dev/changer status
  Storage Changer /dev/changer:2 Drives, 24 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Data Transfer Element 1:Empty
  Storage Element 1:Full :VolumeTag=VXS001L6
  Storage Element 2:Full :VolumeTag=VXS002L6
  Storage Element 3:Full :VolumeTag=VXS003L6
  Storage Element 4:Full :VolumeTag=VXS004L6
  Storage Element 5:Full :VolumeTag=VXS005L6
  Storage Element 6:Full :VolumeTag=VXS006L6
  Storage Element 7:Full :VolumeTag=VXS007L6
  Storage Element 8:Full :VolumeTag=VXS008L6
  Storage Element 9:Full :VolumeTag=VXS009L6
  Storage Element 10:Full :VolumeTag=VXS010L6
  Storage Element 11:Full :VolumeTag=VXS011L6
  Storage Element 12:Full :VolumeTag=VXS012L6
  Storage Element 13:Full :VolumeTag=VXS013L6
  Storage Element 14:Full :VolumeTag=VXS014L6
  Storage Element 15:Full :VolumeTag=VXS015L6
  Storage Element 16:Full :VolumeTag=VXS016L6
  Storage Element 17:Full :VolumeTag=VXS017L6
  Storage Element 18:Full :VolumeTag=VXS018L6
  Storage Element 19:Full :VolumeTag=VXS019L6
  Storage Element 20:Full :VolumeTag=VXS020L6
  Storage Element 21:Full :VolumeTag=VXS021L6
  Storage Element 22:Full :VolumeTag=VXS022L6
  Storage Element 23:Full :VolumeTag=VXS023L6
  Storage Element 24:Full

este es el lsscsi -g
[1:0:0:0]tapeHP   Ultrium 6-SCSI   252W  /dev/st0   /dev/sg7
[1:0:0:1]mediumx HP   MSL G3 Series6.20  /dev/sch0  /dev/sg8
[3:0:0:0]cd/dvd  MATSHITA UJDA780 DVD/CDRW CA22  /dev/sr0   /dev/sg9
[5:0:0:0]tapeHP   Ultrium 6-SCSI   252W  /dev/st1   /dev/sg10

ayuda por favor.

+--
|This was sent by nirvana...@hotmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] Bacula Webmin module will not start

2016-07-22 Thread SteveHodge

I am wanting to administer Bacula through Webmin. I have a working 
installation, but need to expand a bit, and being able to use Webmin would help 
a lot
I cannot get the Webmin module to start. It just says 'Failed to load the 
database DBI driver SQLite at ./bacula-backup-lib.pl line 45. Maybe it is not 
set up, or the module configuration is incorrect.'. the same thing happens when 
I specify MySQL or PostGreSQL, although I think Bacula is using SQLite.
I have checked that the perl module DBI is installed, and indeed deleted and 
re-installed it. It shows up in the Webmin Perl module, albeit not in bold like 
the rest of the modules
Has anyone seen this problem and has a solution
I have a feeling that I may have to set up the database again and then 
uninstall and reinstall Bacula. Obvously I can save the Config files if I do 
this, but does this mean I will lose the existing database and the six months 
of back-ups it references
Steve Hodge

+--
|This was sent by h...@sloth.demon.co.uk via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] Fw: BAT hangs.

2016-07-22 Thread Erik P. Olsen

Sorry, the bug# is incorrect. The report can be found at:
https://bugzilla.redhat.com/show_bug.cgi?id=1296866

-- 
Erik
 
Videresendt mail:

[Start]
I have reported this bug to the fedora bugzilla (#1182722) Jan. 2016
because I use bacula from the fedora repository and it was at some time
suggested by Kern to be a packaging problem. I install this morning
bacula 7.4.2 just to find that the bug was not fixed in this release.

If it is that difficult for the packager to fix it I hope someone from
the bacula team would help him.

-- 
Erik

[Slut]

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] BAT hangs.

2016-07-22 Thread Erik P. Olsen

I have reported this bug to the fedora bugzilla (#1182722) Jan. 2016
because I use bacula from the fedora repository and it was at some time
suggested by Kern to be a packaging problem. I install this morning
bacula 7.4.2 just to find that the bug was not fixed in this release.

If it is that difficult for the packager to fix it I hope someone from
the bacula team would help him.

-- 
Erik

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] problem drive bacula

[Bacula-users] problem drive bacula

Re: [Bacula-users] problema para reconocer dispositivos libreria hp msl2024

Re: [Bacula-users] problem drive bacula

[Bacula-users] problem drive bacula

[Bacula-users] problema para reconocer dispositivos libreria hp msl2024

[Bacula-users] Bacula Webmin module will not start

[Bacula-users] Fw: BAT hangs.

[Bacula-users] BAT hangs.

9 matches

Site Navigation

Mail list logo

Footer information