On 09/01/2011 03:32 PM, Mark wrote:
Is it not acceptable to do your fulls on the first and third Sunday of
each month, with diffs on the second, fourth, and fifth (if it exists)
Sunday?
Run = Level=Full Pool=Full-Pool Developer-PC on first, third
Sun at 0:05
Run =
Hi,
On Thu, 01 Sep 2011, Eric Pratt wrote:
The incremental will run, but it shouldn't back anything up if nothing
changed since the last time the job ran. When it runs, it looks to
see if anything changed and if not, exits with OK. There is no
redundancy there. Check the byte count of the
On 09/06/2011 08:37 AM, Gavin McCullagh wrote:
Hi,
On Thu, 01 Sep 2011, Eric Pratt wrote:
The incremental will run, but it shouldn't back anything up if nothing
changed since the last time the job ran. When it runs, it looks to
see if anything changed and if not, exits with OK. There is no
On Tue, 06 Sep 2011, Dan Schaefer wrote:
This certainly will fix my problem. All my backups are in fact
disk-based and I have a separate process backing up to tapes (not
Bacula, atm). I like the idea of the virtual full option, because my
full backups usually take longer than I would like.
In English, I want to do a full backup on the 1st and the 16th of every
month. I also want to do a differential backup every Sunday and an
Incremental Monday-Saturday.
Here is my config:
Run = Level=Full Pool=Full-Pool Developer-PC on 1,16 at 0:05
Run = Level=Differential
On Thu, Sep 1, 2011 at 11:57 AM, Dan Schaefer d...@performanceadmin.com wrote:
In English, I want to do a full backup on the 1st and the 16th of every
month. I also want to do a differential backup every Sunday and an
Incremental Monday-Saturday.
Here is my config:
Run = Level=Full
