On Thu, October 7, 2010 08:21, John Drescher wrote:
[SNIP]
> I see I am running not the latest version of that. I will see if that
> fixes the issue.
>
> dev6 ~ # mtx --version
> mtx version 1.2.18rel
>
> I have mtx-1.3.12 available in my distro repository but the link they
> give me for the upstre
I do have that:
Autochanger {
Name = Autochanger
Device = DLTv4
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg4
}
Device {
Name = DLTv4
Drive Index = 0
Media Type = tape
Archive Device = /dev/nst0
AutomaticMount = yes
LabelMedia = y
On Wed, Oct 6, 2010 at 5:13 PM, Bob Hetzel wrote:
> The need to run update slots twice would possibly be fixed by upgrading your
> mtx. If it gets back a different message the first time on the upgraded
> version then report it as a bug on the mtx list and you'll probably get
> somebody to fix it
On Wed, Oct 6, 2010 at 4:34 PM, Bob Hetzel wrote:
>
>
> On 10/6/2010 4:01 PM, John Drescher wrote:
>>
>> On Wed, Oct 6, 2010 at 3:46 PM, Bob Hetzel wrote:
>>>
>> Isnt it?supposed?to pull media from scratch pool?
>>>
>>> >
I believe it will pull from the scratch pool if only if ther
On Wed, Oct 6, 2010 at 3:46 PM, Bob Hetzel wrote:
>
>>> > Isnt it?supposed?to pull media from scratch pool?
> >
>> I believe it will pull from the scratch pool if only if there are no
>> acceptable volumes in the pool. CNH895 was an acceptable volume even
>> though it was not in the changer so it
>> > Isnt it?supposed?to pull media from scratch pool?
>
> I believe it will pull from the scratch pool if only if there are no
> acceptable volumes in the pool. CNH895 was an acceptable volume even
> though it was not in the changer so it picked that over grabbing one
> from the scratch.
>
> The
On Tue, Oct 5, 2010 at 3:00 PM, Romer Ventura wrote:
> How can i manually mark the tape as Used...? I havent been able to find it
update volume
then follow the prompts to change the Status.
jmd0 ~ # bconsole
Connecting to Director jmd0:9101
1000 OK: jmd0-dir Version: 5.0.3 (04 August 2010)
Ent
How can i manually mark the tape as Used...? I havent been able to
find it in the docs.
Thanks
--
Romer Ventura
On Oct 5, 2010, at 11:35 AM, John Drescher wrote:
2010/10/5 Romer Ventura :
Hello,
I recently change the set of tapes for the month and for some
reason i am
getting errors w
> Isnt it supposed to pull media from scratch pool?
I believe it will pull from the scratch pool if only if there are no
acceptable volumes in the pool. CNH895 was an acceptable volume even
though it was not in the changer so it picked that over grabbing one
from the scratch.
There may be some co
Isnt it supposed to pull media from scratch pool?
Based on the info bellow, does it mean i should set Pool to
scratch...? What i would like to have is first sunday of the month do
a full back up, weekdays do an incremental, then every sunday (except
1st sunday of the month) do a differentia
> Pool: FileServPool-Full-tape
> +-++---+-+-+--+--+-+--+---+---+-+
> | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
> VolRetention | Recycle | Slot |
*list media
Pool: Default
No results to list.
Pool: File
No results to list.
Pool: Scratch
+-++---+-+--+--
+--+-+--+---+---
+-+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes
2010/10/5 Romer Ventura :
> I have done "update slots"
> *update slots
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> The defined Storage resources are:
> 1: SLDLTv4
> 2: File
> Select Storage resource (1-2): 1
> Connecting to Storage daemon SLDLTv4 at housigma2
I have done "update slots"
*update slots
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
The defined Storage resources are:
1: SLDLTv4
2: File
Select Storage resource (1-2): 1
Connecting to Storage daemon SLDLTv4 at housigma25.h-st.com:9103 ...
3306 Issuing autochange
2010/10/5 Romer Ventura :
> Hello,
> I recently change the set of tapes for the month and for some reason i am
> getting errors when backing up data since bacula keeps asking about a tape
> that was previously used. How can i get bacula to use the new set? i've done
> the updata slots and label bar
On 10/05/10 11:59, Romer Ventura wrote:
> Hello,
>
> I recently change the set of tapes for the month and for some reason i
> am getting errors when backing up data since bacula keeps asking about a
> tape that was previously used. How can i get bacula to use the new set?
> i've done the updata sl
Hello,
I recently change the set of tapes for the month and for some reason
i am getting errors when backing up data since bacula keeps asking
about a tape that was previously used. How can i get bacula to use
the new set? i've done the updata slots and label barcode, etc and
nothing seem
17 matches
Mail list logo
