Thanks Uwe for clearing out doubts. Appreciate it.
Regards,
Sachin
-Original Message-
From: Uwe Schuerkamp [mailto:uwe.schuerk...@nionex.net]
Sent: Freitag, 16. März 2012 11:08
To: Holikar, Sachin (ext)
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] bacula Offsite
you.
Regards,
Sachin
-Original Message-
From: Alan Brown [mailto:a...@mssl.ucl.ac.uk]
Sent: Freitag, 9. März 2012 15:40
To: Holikar, Sachin (ext)
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] bacula Offsite Backups
On 09/03/12 07:48, Holikar, Sachin (ext) wrote:
1
On Fri, Mar 09, 2012 at 03:49:40PM +0100, Holikar, Sachin (ext) wrote:
Thanks Uwe for the reply.
I request some explanation here.
You suggested :
1.Create a separate offsite pool and then after use, remove them as
necessary from the autochanger and set their volume status to
On Fri, 9 Mar 2012 10:07:22 -0300 Kleber Leal kleber.l...@gmail.com wrote:
Create a off-site pool and create a copy job.
The bacula will need off-site tapes only when the backups was
pruned/purged from local tapes.
I seem to remember that tape to tape copy jobs require two tape drives.
Create a off-site pool and create a copy job.
The bacula will need off-site tapes only when the backups was pruned/purged
from local tapes.
Kleber
2012/3/9 Uwe Schuerkamp uwe.schuerk...@nionex.net
On Fri, Mar 09, 2012 at 08:48:40AM +0100, Holikar, Sachin (ext) wrote:
Hello Admis,
We have
@lists.sourceforge.net
Subject: Re: [Bacula-users] bacula Offsite Backups
On Fri, Mar 09, 2012 at 08:48:40AM +0100, Holikar, Sachin (ext) wrote:
Hello Admis,
We have a working Bacula ( Release 2.2.7) setup.
So far all the backup tapes are retained inside the tape library. But now we
have decided
to erase the tapes which are archived ?? Please
explain.
Thanx.
- Sachin
-Original Message-
From: Uwe Schuerkamp [mailto:uwe.schuerk...@nionex.net]
Sent: Freitag, 9. März 2012 13:48
To: Holikar, Sachin (ext)
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] bacula
On 09/03/12 07:48, Holikar, Sachin (ext) wrote:
1. Can we just take out the filled/half-filled tapes out of the tape library
just like that to be kept at offsite? Or some necessary procedure is
required for this?
update volume={volumename} VolStatus=Used (or Archive)
2. Once we take
On Fri, 9 Mar 2012 10:07:22 -0300
Kleber Leal kleber.l...@gmail.com wrote:
Create a off-site pool and create a copy job.
The bacula will need off-site tapes only when the backups was
pruned/purged from local tapes.
Kleber
2012/3/9 Uwe Schuerkamp uwe.schuerk...@nionex.net
On Fri, Mar
Hello Admis,
We have a working Bacula ( Release 2.2.7) setup.
So far all the backup tapes are retained inside the tape library. But now we
have decided to keep 1 set offsite.
We have created a separate pool of tapes ( say 10 tapes) and taken few
important backups last week. Now couple of tapes
I have successfully been using Bacula for almost 2 years now. Fairly
small (~30 machines) and straight forward setup -- only one director,
one SD.
A need has arisen to start doing offsite backups. Now, what seems
like pretty trivial task, came out to be major headache.
I went through mailing
For the last few days, I've been struggling with the same problem, and I
don't if my experience can help you or not, but here goes:
First of all, I have a special Admin Job that runs every day at 12:00pm,
which basically sends my Catalog Backup (postgres), the bacula-dir and
bacula-sd config and
12 matches
Mail list logo