because of the
catalog feature, or do I have to balance full dumps manually over the
weekdays in the cycle?
Bye for now thanks in advance for your time,
Uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66 FAX: / 806 23 38
Avenwedder Str. 55
performance is better than tat of our disk based
storage due to mixed LVM / raid setup and the tape library is rather
new, I would not expect any issues with backups taking longer than
usual.
Is a setup like this possible?
Thanks in advance for any help on this,
Uwe
--
Uwe Schuerkamp, NIONEX
On Wed, Aug 02, 2006 at 01:33:53PM +0200, Uwe Schuerkamp wrote:
From: Uwe Schuerkamp [EMAIL PROTECTED]
To: Bacula Users Mailing List bacula-users@lists.sourceforge.net
Date: Wed, 2 Aug 2006 13:33:53 +0200
Subject: [Bacula-users] Backup up to tape AND disk at the same time
Hello,
I
On Wed, Aug 02, 2006 at 09:47:18AM -0400, Hristo Benev wrote:
From: Hristo Benev [EMAIL PROTECTED]
To: Uwe Schuerkamp [EMAIL PROTECTED]
Cc: Bacula Users Mailing List bacula-users@lists.sourceforge.net
Date: Wed, 02 Aug 2006 09:47:18 -0400
Subject: Re: [Bacula-users] Backup up to tape AND disk
of them.
Cheers, uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66 FAX: / 806 23 38
Avenwedder Str. 55, D-33311 Guetersloh, Germany
GnuPG KeyID: 5887047D, Fingerprint: 2E1320229A3F63 7F676FE9B1A836A461
backup, the volume column lists *unknown* where it
should list the online (disk) volume when I use status dir in bconsole.
Can somebody please shed some light on what I am doing wrong? (using
bacula 1.38.9 compiled from source on Debian if that matters).
Cheers, Uwe
--
Uwe Schuerkamp, NIONEX
On Tue, Aug 29, 2006 at 10:45:25AM +0200, Masopust, Christian wrote:
From: Masopust, Christian [EMAIL PROTECTED]
To: Uwe Schuerkamp [EMAIL PROTECTED],
Bacula Users Mailing List bacula-users@lists.sourceforge.net
Date: Tue, 29 Aug 2006 10:45:25 +0200
Subject: RE: [Bacula-users] jobdefs
, the hosts scheduled today for an incremental backup seem to be
destined for the correct disk / online volume, at least the
*unknown* volume has disappeared from the status dir output.
All the best thanks again for your help,
Uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL
On Tue, Aug 29, 2006 at 11:04:33AM +0200, Uwe Schuerkamp wrote:
From: Uwe Schuerkamp [EMAIL PROTECTED]
To: Masopust, Christian [EMAIL PROTECTED]
Cc: Bacula Users Mailing List bacula-users@lists.sourceforge.net
Date: Tue, 29 Aug 2006 11:04:33 +0200
Subject: Re: [Bacula-users] jobdefs question
incremental backup
to the online01 pool or is there something wrong with my setup? Does
your status dir also list volumes as unknown in this case?
Cheers, uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66 FAX: / 806 23 38
Avenwedder Str. 55, D
for the best tonight and post
results tomorrow.
All the best, uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66 FAX: / 806 23 38
Avenwedder Str. 55, D-33311 Guetersloh, Germany
GnuPG KeyID: 5887047D, Fingerprint: 2E1320229A3F63
= Default
Recycle Oldest Volume = yes
Pool Type = Backup
Recycle = yes
AutoPrune = yes # Prune expired volumes
Volume Retention = 6 months
Accept Any Volume = yes # write on any volume in the
pool
}
Thanks in advance for your help,
Uwe
--
Uwe
*not* in
changer
On Friday 01 September 2006 22:15, Arno Lehmann wrote:
Hi,
On 9/1/2006 1:40 PM, Uwe Schuerkamp wrote:
Hi folks,
I was wondering about the best way to tell bacula that volumes not
present in the changer are not to be recycled / used to avoid operator
intervention. We
On Tue, Sep 05, 2006 at 12:59:57PM +0100, Jaime Ventura wrote:
From: Jaime Ventura [EMAIL PROTECTED]
To: Uwe Schuerkamp [EMAIL PROTECTED]
Cc: Arno Lehmann [EMAIL PROTECTED],
Bacula Users bacula-users@lists.sourceforge.net
Date: Tue, 05 Sep 2006 12:59:57 +0100
Subject: Re: [Bacula-users
limiting it by the
number of jobs.
Also remember that you'll need to update pool from resource
definition in bconsole once you've changed the pool resource.
HTH,
uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66 FAX: / 806 23 38
Avenwedder
On Wed, Sep 06, 2006 at 04:06:35PM -0400, Ryan Novosielski wrote:
From: Ryan Novosielski [EMAIL PROTECTED]
To: Uwe Schuerkamp [EMAIL PROTECTED]
Cc: bacula-users@lists.sourceforge.net
Date: Wed, 06 Sep 2006 16:06:35 -0400
Subject: Re: [Bacula-users] backup rotation
-BEGIN PGP SIGNED
a volume manually. I'm
temped to try the obsolete purge oldest volume thingy, but the docs
tell me this is not a good idea ;-)
Again, if there's any information mission please let me know and I'll
be happy to provide what I can.
All the best thanks much in advance for your help,
Uwe
--
Uwe
write performance is excellent, so why shouldn't prune
performance be excellent, too? Is 10 GB database size too much for the
backup volume I mentioned in my first email?
Cheers thanks, uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66
installed),
depending on activity.
All the best thanks in advance for your comments,
Uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66 FAX: / 806 23 38
Avenwedder Str. 55, D-33311 Guetersloh, Germany
GnuPG KeyID: 5887047D, Fingerprint
, ok? ;-)
All the best thanks for your help,
Uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] Tel: +49 (0)5241 / 80 10 66 FAX: / 806 23 38
Avenwedder Str. 55, D-33311 Guetersloh, Germany
GnuPG KeyID: 5887047D, Fingerprint: 2E1320229A3F63 7F676FE9B1A836A461
into the bacula
instance running in another data centre, could this be done using
bscan on the tape or would some other method be more appropriate?
Would it pose a problem if the client I need to restore is unknown on
this bacula instance I'll be importing to?
All the best TIA for your help,
Uwe
--
Uwe
On Wed, Dec 03, 2008 at 10:01:22AM -0500, John Drescher wrote:
On Wed, Dec 3, 2008 at 9:37 AM, Uwe Schuerkamp [EMAIL PROTECTED] wrote:
Hi folks,
I need to restore data from an offlined DLT tape. The tape is labelled
OFFLINE01 and was created on one of our four bacula servers (all
to disk using
cp /dev/nst0 /mnt/raid/OFFLINE01
and then work with the OFFLINE01 file for faster access?
All the best thanks again for your help,
Uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] phone: [+49] 5242.91- 4740 fax:-9722
Hauptsitz: Avenwedder Str. 55
On Wed, Dec 03, 2008 at 03:37:10PM +0100, Uwe Schuerkamp wrote:
Hi folks,
I need to restore data from an offlined DLT tape. The tape is labelled
OFFLINE01 and was created on one of our four bacula servers (all
running the same bacula version) and put into a safe for storage at
another
sorry, just found out about bextract, please ignore my previous
email.
all the best, uwe
--
Uwe Schuerkamp, NIONEX GmbH (http://www.nionex.com/)
[EMAIL PROTECTED] phone: [+49] 5242.91- 4740 fax:-9722
Hauptsitz: Avenwedder Str. 55, D-33311 Guetersloh, Germany
Registergericht Guetersloh HRB
On Wed, Feb 25, 2009 at 05:37:05PM +, Graham Keeling wrote:
Hello,
Here I'm using bacula-2.2.8.
I have a bacula storage daemon, 'Disk 1' (Device 'Disk 1.0') and a bacula
storage daemon, 'BPL2Disk 1' (Device 'BPL2Disk 1.0').
There is one backup job allowed per volume.
'BPL2Disk 1'
Hello folks,
we're experiencing massive problems backing up an ocfs2 cluster
filesystem mounted on SLES 10 SP2 machines located on a shared SAN
storage). The cluster has 8 members, and we've already tried certain
mount options (noatime et al.) in an attempt to improve performance,
however
Hi folks,
thanks for your suggestions, I tried your tar suggestion and indeed it
turns out that transfer rates drop to the dozens of kb/sec in one
special directory stored on the ocfs2 filesystem.
I'm now in contact with the ocfs2 devs on the users list to see if
they have any suggestions.
All
Hi folks,
I'd like to add a 2nd tape library to one of our bacula servers which
is running out of space. Is it possible to define jobs in such a way
that bacula itself will take care of which storage the job actually
ends up in / on?
My idea was to label the tapes in the new library so that
On Tue, Mar 17, 2009 at 10:21:46AM +, Prashant Ramhit wrote:
Hi All,
I am using a SuperLoader 3 - LTO4 and I had the following error.
I think the end of the tape is reached.
10-Mar 09:41 server-sd JobId 52: Error: Unable to position to end of
data on device TapeDrive (/dev/nst0):
There's also the disable bconsole command which allows you to
disable certain backup jobs. This way, you won't have to change the
configuration files.
All the best,
Uwe
--
uwe.schuerk...@nionex.net phone: [+49] 5242.91 - 4740, fax:-69 72
Hauptsitz: Avenwedder Str. 55, D-33311 Guetersloh,
On Thu, Mar 26, 2009 at 03:35:19PM +1100, terryc wrote:
Due to hardware recognition problems in the latest version of
Debian(lenny), I might have to relocate my bacula host to another boxen.
Are there any gotchas(likely problems)?
My main area of concern is the database?
Hi Terry,
as long
On Wed, Mar 25, 2009 at 04:02:08PM -0400, Bill Szkotnicki wrote:
Hi,
I was wondering if there is a command line tool that could produce a
brief report on the status of a client's backups. I have bacula set up
to do PC client backups every day and I would like to basically sent
each client
Hi folks,
the recent talk here of a bug relating to concurrent writes to a
single backup volume has made me a bit uneasy about one of our
production bacula servers.
We have one system with two tape libraries (so no single volume is
used by two backups at the same time), however the other system
Hi folks,
I'm having a problem with my bacula setup: Bacula creates a new volume
in an 8-volume pool that already has 8 volumes in it, then waits for a
mount of the new volume.
Background: I recently played around with a 2nd changer tape in the
same pool and had to increase the maxvols
Hi folks,
I've installed bacula 2.4.4 from source on a Centos 5 system connected
to a 48-volume overland datavault tape library (one LTO4 drive).
btape tests (incl. the autochanger test) ran worked fine, as did the
labelling of the first 8 tapes. Hoewver when I try to label tape #9, I
get the
Sorry, just read up on the maximum changer wait directive, sorry for
wasting your time and bandwidth, I'll give this one a try.
Uwe
--
uwe.schuerk...@nionex.net phone: [+49] 5242.91 - 4740, fax:-69 72
Hauptsitz: Avenwedder Str. 55, D-33311 Guetersloh, Germany
Registergericht Guetersloh HRB
On Thu, May 28, 2009 at 06:01:06AM -0400, Il Neofita wrote:
I connected the backup server and the client with a crossover cable at 1G
however
Files=16,251 Bytes=5,504,385,701 Bytes/sec=9,690,819 Errors=0
What can I check?
I am using SAS disks
With ethtool I have
Speed: 1000Mb/s
therefore
On Thu, May 28, 2009 at 08:27:06AM -0400, Il Neofita wrote:
First of all thank you for the answer
No I do not use compression in my file set
Options {
signature = MD5
}
I tried to upload with sftp
Uploading testfile to /tmp/terrierj
testfile
On Mon, Jun 01, 2009 at 12:13:37AM -0300, junior carvalho wrote:
Hi all;
I have some debian etch servers working with bacula 1.38; I would like to
migrate to 2.4 ( from backports ), there are some kind of incompatibilites?
problems? there are a special way to follow?
JC
Hello JC,
we
On Thu, Jun 04, 2009 at 09:20:34AM +0200, Christian Gaul wrote:
Bob Hetzel schrieb:
Greetings,
I've been seeing an issue whereby a volume gets marked in error
periodically. The last items logged about that volume are typically like
this:
02-Jun 11:53 gyrus-sd JobId 83311: Volume
Hi folks,
I have a spare lto3 8x library which I'd like to use to story copy
jobs of recent full backups.
The library is attached to a separate server (compaq dl360), so my
question is what would be required on this server in order to run 2nd
bacula storage there. Is it just the sd that needs
On Thu, Jun 25, 2009 at 12:42:30PM +0200, Andreas Schuldei wrote:
hi!
reading the documentation i understand that you should have several
volumes for concurrent backups, on different devices/directories. (i
work on disk for now.)
However some people here on the list seem to be doing well
On Wed, Jul 15, 2009 at 09:50:43PM -0400, John Drescher wrote:
On Wed, Jul 15, 2009 at 8:15 PM, terrycter...@woa.com.au wrote:
Martin Simmons wrote:
The best thing is to find out why it happened, before deciding how to
correct
it.
So the question still stands of the recommended way
On Thu, Jul 16, 2009 at 11:45:53AM +0100, Graham Keeling wrote:
I had similar problems. I had to define 'Maximum Concurrent Jobs' in many
places to get it to work.
Currently, I have it like this:
bacula-dir.conf:
Director { Maximum Concurrent Jobs = 20; }
Storage { Maximum
Hi folks,
quick question about Bacula 2.4.x: Is it possible to generate an
Exclude fileset statement by inclusion of a text file that lists
dirs to be excluded in a line-by-line fashion?
All the best thank in advance for any ideas,
Uwe
--
uwe.schuerk...@nionex.net fon: [+49] 5242.91 -
On Tue, Sep 29, 2009 at 11:23:09PM +0100, John Kennedy wrote:
Using Bacula 2.2.6 on Debian 4 with an Overland 2 drive, 24 tape library
We have some archive tapes that we hold beyond the normal pruning cycle.
Unfortunately we need to recover some data off these tapes. I have used blist
to
On Thu, Oct 29, 2009 at 10:37:13AM +0100, mario.tolj wrote:
Hello,
Sorry if my English isn't very well.
I did a mistake when i deleted a volume from the Default Pool. and now i
would like to relabel the tape with another name and put this volume in
a different Pool (in example
On Thu, Oct 29, 2009 at 10:37:13AM +0100, mario.tolj wrote:
Hello,
Sorry if my English isn't very well.
I did a mistake when i deleted a volume from the Default Pool. and now i
would like to relabel the tape with another name and put this volume in
a different Pool (in example
On Thu, Oct 29, 2009 at 11:18:58AM -0200, Rodrigo Fernandes wrote:
Does anyone know if the reload command really works in bconsole? For the
manual, only works in some situations. Has anyone tested this command?
Regards,
Works fine here in all of our bacula 2.x installations as far as I'm
On Mon, Dec 07, 2009 at 06:33:59AM -0800, Oliver Knittel wrote:
Hello Together,
I get the folloing message when I ask for the Status of Storage File
Fatal error: bsock.c:135 Unable to connect to Storage daemon on
backupsrv.ke-si.intern:9103. ERR=Connection refused
DNS is correct Sever
On Wed, Jan 06, 2010 at 12:52:44PM -0500, Phil Stracchino wrote:
My first inclination is to say that if the network connection to the
machine is sufficiently unstable that you can't complete a full backup,
you probably shouldn't be trying to back it up over the network.
However, there are
Hi folks,
I just set up the first 3.0.3 bacula server (compiled from source on
CentOS 5.4) in our environment and was wondering wether 2.x clients
cann still talk to a 3.x server version? I cannot test this right now
without going through major changes because the new server is not at
its final
On Thu, Jan 14, 2010 at 05:43:36PM +0100, Ulrich Leodolter wrote:
On Thu, 2010-01-14 at 17:10 +0100, Ralf Gross wrote:
Uwe Schuerkamp schrieb:
Hi folks,
I just set up the first 3.0.3 bacula server (compiled from source on
CentOS 5.4) in our environment and was wondering wether 2.x
Hi folks,
I'm running bacula 2.2.8 compiled from source on Ubuntu lts 8.04. I
was wondering wether it's possible to enable software compresson for
incrementals only as our full backups go to an lto3 tape (hw
compression), while the incs end up on local disk, using the
incremental=... syntax in
On Thu, Jan 28, 2010 at 01:24:35PM -0500, Steve Polyack wrote:
On 01/28/10 13:07, Uwe Schuerkamp wrote:
Hi folks,
I'm running bacula 2.2.8 compiled from source on Ubuntu lts 8.04. I
was wondering wether it's possible to enable software compresson for
incrementals only as our full backups go
On Tue, Feb 02, 2010 at 01:57:52PM +0100, Daniel Kamm wrote:
Hi all
Just an idea of mine, let me know if this is possible or not.
Let's say I have a huge autochanger with lots of space and lots of
cartriges available. Let's also assume, that I have a uncontrollable
data groth and I
On Wed, Feb 03, 2010 at 05:58:49PM -0500, Dan Langille wrote:
I have two tape drives. We'll ignore that one of them is a tape library
for now (http://marc.info/?l=bacula-usersm=126504711226283w=2).
I have one Pool because I haven't had a good reason to create another
pool. I cannot get
On Wed, Feb 03, 2010 at 03:22:24PM -0500, Scott Courtney wrote:
On Wed, 2010-02-03 at 11:08 -0600, Heitor Medrado de Faria wrote:
I couldn't find anything going back that far in the docs. Does
anyone
happen to know offhand what the latest director is that can still
connect to file
On Mon, Feb 15, 2010 at 11:55:35AM +0100, Daniel Kamm wrote:
Hi Tino
Am 2/15/10 11:10 AM, schrieb Tino Schwarze:
And even though there are volumes in the scratch pool, e.g.:
Pool: Scratch
On Wed, Mar 24, 2010 at 07:58:40AM -0700, MoreDakka wrote:
Hi,
Bacula looks like a great piece of software. We are looking to pair it
with: TANDBERG LTO4 800/1.6TB HH SCSI INT Mfg#: TAB-3501-LTO
Does anyone know if that will be compatible with bacula or should we be
looking for a
Hi folks,
looks like lucid comes with bacula v5 which seemingly is unable to
talk to our server running bacula 2.4.x:
bacula-fd -c /etc/bacula/bacula-fd.conf -d 99 -f
bacula-fd: filed_conf.c:452-0 Inserting director res: lotus-mon
lotus-fd: filed.c:275-0 filed: listening on port 9102
lotus-fd:
On Tue, Apr 27, 2010 at 12:50:08PM +0200, Matija Nalis wrote:
On Tue, Apr 27, 2010 at 12:27:11PM +0200, Uwe Schuerkamp wrote:
Hi folks,
looks like lucid comes with bacula v5 which seemingly is unable to
talk to our server running bacula 2.4.x:
Your other clients are all 2.4.x I guess
On Tue, Apr 27, 2010 at 04:08:21PM +0200, Daniel Kamm wrote:
Am 4/27/10 12:50 PM, schrieb Matija Nalis:
So your options are either to downgrade the client on Lucid (maybe
there can be found a package for 2.4.x version ?
You may try to install the Ubuntu package for Karmic Koala or Hardy
On Mon, May 03, 2010 at 04:35:20PM -0400, Phil Stracchino wrote:
On 05/03/10 06:02, Carlo Filippetto wrote:
Hi all,
I have a problem,
I had installed bacula 5.0.1. on Winows client, and work fine, but I
have no compression
Software Compression: None
while
FileSet {
Hi folks,
sorry if this is the wrong list, but maybe you can help me out anyway:
Is it possible to assign labels to db instances in bacula-web? Right
now, whenever I use something besides [.DATABASEn], php barfs and I
don't get any results.
Thanks much in advance,
Uwe
--
On Wed, May 12, 2010 at 12:59:53PM +0200, Uwe Schuerkamp wrote:
Hi folks,
each time I cancel a backup job, the next job bound for that volume on
which the cancelled job ran Bacula marks the volume in error with a
file count mismatch.
I don't recall bad behaviour like this from previous
On Fri, May 28, 2010 at 01:16:33PM -0400, lweinlan wrote:
Hello, I am running backups using bacula and a LTO-4 tape library. Everything
is running fine, but this morning, the first LTO-4 tape that I used is marked
as volume status = full with only 176.24 GB ???
A LTO-4 tape has a capacity
On Fri, Jul 02, 2010 at 12:02:25PM -0400, Dan Langille wrote:
On 7/2/2010 12:00 PM, Mike Carlson wrote:
On 06/28/2010 07:01 PM, Dan Langille wrote:
On 6/28/2010 12:53 PM, Mike Carlson wrote:
Hello Bacula user's list,
I'm having some trouble with a bacula client. The backup to a storage
Hi folks,
will the following schedule accomplish what we expect? ;-)
Schedule {
Name = first_saturday_in_mar_jun_sep_dec
Run = Level=Full 1st Sat Mar Jun Sep Dec at 00:00
Run = Level=Incremental 2nd Sat at 00:00
}
- full backups on the 1st Saturday in mar, jun, sep and dec.
-
Hi folks,
over the weekend, our mysql bacula db seems to have hit the maximum
possible auto_increment counter for an unsigned int(10) as I'm getting
duplicate key errors on insert's into the File table.
Is there a way to increase the maximum value or do I need to rebuild
the bacula db from the
On Mon, Aug 30, 2010 at 08:45:50AM +0200, Uwe Schuerkamp wrote:
Hi folks,
over the weekend, our mysql bacula db seems to have hit the maximum
possible auto_increment counter for an unsigned int(10) as I'm getting
duplicate key errors on insert's into the File table.
Is there a way
Hi folks,
looks like extending the value range did not fix the error
entirely. When running an incr. backup, I receive the following error
message:
Fatal error: Can't fill File table Query failed: INSERT
INTO File (FileIndex, JobId, PathId, FilenameId, LStat, MD5)SELECT
batch.FileIndex,
On Wed, Sep 29, 2010 at 01:51:15PM +0200, Roberto Preziusi wrote:
Hello Folks,
how can I exclude all NFS share mounted in randomly mount point ?
Thanks
Hello Roberto,
there is a settings variable that tells bacula not to descend into
different file systems from the one it is currently
sorry folks, that link seems to be dead, I wanted to point out the
onefs=yes|no
configuration option.
Cheers, Uwe
--
uwe.schuerk...@nionex.net fon: [+49] 5242.91 - 4740, fax:-69 72
Hauptsitz: Avenwedder Str. 55, D-33311 Gütersloh, Germany
Registergericht Gütersloh HRB 4196, Geschäftsführer:
/boot
/
you need to list them both explicitly in your fileset definition.
HTH, Uwe
2010/9/29 Uwe Schuerkamp uwe.schuerk...@nionex.net
sorry folks, that link seems to be dead, I wanted to point out the
onefs=yes|no
configuration option.
Cheers, Uwe
--
uwe.schuerk
Hi folks,
I have an HP 1/8 autoloader lto4 drive which we use for full offline
backups and was wondering wether it's safe to run 2 concurrent jobs on
that device at the same time? Despooling sadly isn't possible at the
moment for lack of disk space, bacula version is 5.0.3 on CentOS
(compiled
On Wed, Oct 06, 2010 at 08:55:27AM -0400, John Drescher wrote:
I have an HP 1/8 autoloader lto4 drive which we use for full offline
backups and was wondering wether it's safe to run 2 concurrent jobs on
that device at the same time? Despooling sadly isn't possible at the
moment for lack
On Thu, Dec 30, 2010 at 11:03:07AM +, Mister IT Guru wrote:
When I run a backup, I end up with this error:
30-Dec 10:53 bacula.local JobId 16: Warning: mount.c:217 Open device
FileStorage (/backups/default) Volume BaculaBackups-0001 failed:
ERR=dev.c:549 Could not open:
On Wed, Jan 05, 2011 at 11:06:52AM -0600, Ben Beuchler wrote:
Once a year, I need to create a full backup that will be stored
off-site. This backup will not be readily available for normal
restores. The obvious approach would be to delete that backup (and
its volumes) from the catalog so
Hi folks,
I'm trying to wrap my head around the following setup:
- For a couple of clients / jobs, we'd like to store two full backups
on disk (weekly full, daily incremental)
- We'd also like to keep 14 incrementals around just in case we need
to do a point in time recovery.
The
Hello Jeremy all, thanks much for your reply.
On Wed, Mar 30, 2011 at 04:27:07PM +0200, Jeremy Maes wrote:
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 14 days
Volume Use Duration = 6 days
Recycle Oldest Volume = yes
Maximum Volumes =
On Thu, Mar 31, 2011 at 09:58:29AM +0200, Jeremy Maes wrote:
Take care using this if you're doing all the backups concurrently
though, in that case the Volume Use Duration is probably the best way to go.
Hello Jeremy,
thanks again for your thoughts support. I'll try the max use
duration
Hi folks,
I was wondering what would be the best way to implement the following
backup strategy (we have about 30 clients with about 1TB total space
used, with 10TB storage available in total, disk based):
- full backups on weekends (sat / sun)
- incrementals during the week
- At the end of
Hi folks,
for a couple of weeks now I occasionally see messages like these in
the kernel log or our bacula server (bacula 5.0.3 compiled from source
on centos 5.6 64bit):
##
INFO: task bacula-sd:12467 blocked for more than 120
On Mon, May 16, 2011 at 08:39:38AM -0400, John Drescher wrote:
Maybe do what it says.
echo 0 /proc/sys/kernel/hung_task_timeout_secs
John
Hi John,
thanks for your reply, I was wondering if it's an error that I need to
look info or bacula's expected behaviour in those circumstances.
On Mon, May 16, 2011 at 08:50:25AM -0400, John Drescher wrote:
On Mon, May 16, 2011 at 8:45 AM, Uwe Schuerkamp
uwe.schuerk...@nionex.net wrote:
On Mon, May 16, 2011 at 08:39:38AM -0400, John Drescher wrote:
Maybe do what it says.
echo 0 /proc/sys/kernel/hung_task_timeout_secs
John
Hi folks,
I've been following the mysql vs. postgres vs. different mysql
versions discussion which has been very interesting.
Has anyone tried Drizzle as a bacula db backend? It's supposed to be
a lot leaner than mysql, just wondering.
All the best,
Uwe
--
NIONEX ist ein Unternehmen der
On Mon, Jun 20, 2011 at 09:56:29AM -0400, Craig Van Tassle wrote:
I've got several jobs that are running at the same time and they are
spooling data to the local disk, then writing to my Tape Drive for full
backups. My Incremental and Differential's are being written to Disk.
I can only run
On Tue, Aug 09, 2011 at 06:07:41AM +0200, Olle Romo wrote:
Hi All,
'Ignore Fileset Changes = yes' doesn't seem to have the effect I was
hoping for... If a drive is missing on one run, the next time Bacula
sees the drive it will proceed to backup the entire thing again. I'm
sure
Hi folks,
I'm wondering about the best mysql settings for our new bacula
installation which will be taking over from an older setup.
Current bacula db size is 55G, we have around 14TB backup data from
ca. 100 clients on disk storage ATM but this is expected to double in
the next year or so.
On Wed, Oct 05, 2011 at 02:37:37PM +0100, Rory Campbell-Lange wrote:
I've been using non-batch insertion with postgres (following your dare, I
think, Phil) for about a year. Backups are only about 8TB, but it works
extremely well for us.
Hi folks,
thanks for your recommendations and
Hi folks,
as you may remember I've recently set up a brand new bacula server
with version 5.0.3 compiled from source. I copied over the mysql
settings (mysql-server-5.1.52-1.el6_0.1.x86_64) from the
old machine and inquired here for optimized mysql settings to use with
the setup (backup size
On Wed, Oct 26, 2011 at 04:28:58PM +0530, Rushdhi Mohamed wrote:
hi guys ..
I have already installed a bacula client on REHL 6 and it works fine.
but this time its giving an ERROR saying
Starting bacula-fd: Error: Not been configured [FAILED]
test out put here...
I
On Thu, Oct 20, 2011 at 05:41:14PM +0200, Uwe Schuerkamp wrote:
Hi folks,
as you may remember I've recently set up a brand new bacula server
with version 5.0.3 compiled from source. I copied over the mysql
settings (mysql-server-5.1.52-1.el6_0.1.x86_64) from the
old machine and inquired
On Thu, Dec 15, 2011 at 10:25:04AM -0800, gary artim wrote:
no, full, doing a mod on run command in bconsole to force full backup
on every test. cheers
40MB/sec sounds very much like a natural RAID speed limit you're
hitting. Have you tried running some i/o benchmarks on the disks like
Hi folks,
we're running four bacula installations, most of them on version 5.0.x
compiled from source on CentOS 5.x / 6.x 64bit servers. We're mostly
happy with the setup, backups are fast, reliable and generally do not
cause us a lot of headaches.
Today, a colleague asked me to restore some
Hi folks,
thanks to your hints and ideas the restore times have been reduced
from 3-4 hours to about five minutes (building the directory tree,
that is).
Lesson learnt: Before complaining loudly to the list, make sure your
db is in good health by administering a generous dosage of repair
table
Hi folks,
bacula seems to have forgotten the job details for a job I was going
to test a restore on today. According to the bacula email, the backup
finished ok:
Build OS: x86_64-unknown-linux-gnu redhat
JobId: 2155
snip snip
Volume name(s):
On Mon, Feb 20, 2012 at 09:36:47AM -0500, John Drescher wrote:
Has you job retention period expired?
Either way you can get this back using the bacula volume utilities.
http://www.bacula.org/5.2.x-manuals/en/utility/utility/Volume_Utility_Tools.html#SECTION00272000
Make sure
1 - 100 of 450 matches
Mail list logo
