Hi techies,
Is it possible to fix an HID in the upper beam of the P220? If yes, since the
P220 comes with a 55W lightings- will a 35W HID setup work or I have to get a
55W kit? Also I believe it might affect the warranty too.
Please advise.
Regards,
Alkesh
You can fix an HID on the 220.but theres a prob...the light console for
the 220 is an H7so you will wither have to hunt for an H kit or
fabricate your console to an H4(dont knw if its possible)..a better
idea would be to go for an external setup...like deepak.no hasseles with
Though I hate crackers, but this Diwali the fuses on my P150 DTSi have
been blowing up like anything. Its already running on the 7th fuse in
two days. Am sure there is some wire short in the circuit- but with so
many wires being covered under miles of adhesive tape, its extremely
difficult to
Happy fuse Diwali.
The trick to trace the reason for the fuse blow out is to under stand the trend
ie under stand when how the fuse blows.
Once understood, the same can be chased based on the wiring emerging into out
of the particular circuit.
The easier way out is to replace the harness,
Thks Kedar Amit:
am confused...thus it's make any sense to installed HID in P220 if it gets
installed then shall it will kick any warranty problem.
thks regards
alkesh
--- On Wed, 10/29/08, Technocrat [EMAIL PROTECTED] wrote:
P220 will detect the bulb as fused(due to lesser consumption)
If you are looking at HID as an upgrade to your lighting setup on the
P220,would not recommend it. P220 is a bit more complex then what we
anticipate it to be ;)
On Wed, Oct 29, 2008 at 3:47 PM, Alkesh Banavali [EMAIL PROTECTED] wrote:
Thks Kedar Amit:
am confused...thus it's make any
deepak
u do get the whole circuit as i remeber parimal replacin the
whole wirin of P180. but as venkat says try and find the cause 4 the blown
fuses first. bye
--
It takes two to make greatness, one greatness itself and another who
recognises greatness - Ayn Rand
