I thought that, by default, the NOR bootloader was setting it's config
files in NOR as well. But it seems that both bootloader are getting
the same config file.
I will switch to NOR, short the two right data lines, short them,
start the mini board. And at that point I will change back the
/env/conf
On Fri, Oct 21, 2016 at 09:53:45AM +0200, Juergen Borleis wrote:
> Hi Javier,
>
> On Friday 21 October 2016 09:41:15 Javier Fileiv wrote:
> > I was looking to buy an ARM9 Jtag because it's what I
> > though... I would need a JTAG.
> >
> > Regarding shorting the data lines... do you know exactly wh
Hi Javier,
On Friday 21 October 2016 09:54:04 Javier Fileiv wrote:
> shoul I short them between them, short them to GND or
> short them to VDD?
"short two of them" means between them. D2 and D3 for example...
Cheers,
Juergen
--
Pengutronix e.K. | Juergen Borleis
On 10/21/2016 09:54 AM, Javier Fileiv wrote:
Thanks Juergen, shoul I short them between them, short them to GND or
short them to VDD?
Short them together. Does not care if they are tied to GND or VCC, the
results are surely invalid. ;-)
Best regards,
--
Eurek s.r.l.
Thanks Juergen, shoul I short them between them, short them to GND or
short them to VDD?
Thank you again
2016-10-21 9:53 GMT+02:00 Juergen Borleis :
> Hi Javier,
>
> On Friday 21 October 2016 09:41:15 Javier Fileiv wrote:
>> I was looking to buy an ARM9 Jtag because it's what I
>> though... I wou
Hi Javier,
On Friday 21 October 2016 09:41:15 Javier Fileiv wrote:
> I was looking to buy an ARM9 Jtag because it's what I
> though... I would need a JTAG.
>
> Regarding shorting the data lines... do you know exactly what would I
> need to do?
Reading the datasheet of the used NAND device, find i
Hello Juerguen, I was looking to buy an ARM9 Jtag because it's what I
though... I would need a JTAG.
Regarding shorting the data lines... do you know exactly what would I
need to do?
Regarding JTAG, which ones are the steps?
Thank you so much
2016-10-21 9:39 GMT+02:00 Juergen Borleis :
> Hi Ja
Hi Javier,
On Thursday 20 October 2016 19:59:54 Javier Fileiv wrote:
> ups... I think Ive broken everything... I just put at the end of the
> env/config file "boot nand" and now is looping and at some point it
> says "ERROR: out of memory".
> Another thing... I changed vivibootloader in NOR for th
ups... I think Ive broken everything... I just put at the end of the
env/config file "boot nand" and now is looping and at some point it
says "ERROR: out of memory".
Another thing... I changed vivibootloader in NOR for the barebox, and
even if I change to NOR it's looping again and again... What do
Thank you very much maybe I just to put on /env/config a "boot nand" line...
I'll try it.
Regards
2016-10-20 11:13 GMT+02:00 Juergen Borleis :
> Hi Javier,
>
> On Wednesday 19 October 2016 20:18:38 Javier Fileiv wrote:
>> just in case...my /env/config as well
>> [...]
>
> Sorry, no idea. I d
Hi Javier,
On Wednesday 19 October 2016 20:18:38 Javier Fileiv wrote:
> just in case...my /env/config as well
> [...]
Sorry, no idea. I do not even have the hardware anymore, so I cannot test it.
Keep a look into the "env/bin/boot" script, what it tries to do with the
configuration from your "e
just in case...my /env/config as well
mini2440:/ cat /env/config
#!/bin/sh
machine=mini2440
user=
# use 'dhcp' to do dhcp in barebox and in kernel
# use 'none' if you want to skip kernel ip autoconfiguration
ip=dhcp
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
#eth0.netmask=a.b
Hello Juergen,
Here is my power up output, thanks you very much
Terminal ready
barebox 2011.05.0-ptx-2014.11.0 (Oct 13 2016 - 21:53:08)
Board: Mini 2440
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
Bad block table found at page 524224, version 0x01
Bad block
Hi Javier,
On Tuesday 18 October 2016 18:56:03 Javier Fileiv wrote:
> Trying to autoboot from nand, I set my /env/config file like that (and
> after that a "saveenv"). Although it doesn't work automaGically! :)
Can you also send the output of barebox from power on up to the point it falls
into t
Hi all!
Trying to autoboot from nand, I set my /env/config file like that (and
after that a "saveenv"). Although it doesn't work automaGically! :)
What do you think about this guys?
Thanks a lot!
(I'm gonna try the nfs mounting right now!)
mini2440:/ cat env/config
#!/bin/sh
machine=mini2440
user
Yes I did it and the values are ok. When I get home I'll send my config file!
Thanks
2016-10-18 10:17 GMT+02:00 Juergen Borleis :
> Hi Javier,
>
> On Sunday 16 October 2016 23:06:15 Javier Fileiv wrote:
>> I've just flashed barebox on my Mini2440. I have 2 questions/issues now
>>
>> 1) When tryin
Hi Javier,
On Sunday 16 October 2016 23:06:15 Javier Fileiv wrote:
> I've just flashed barebox on my Mini2440. I have 2 questions/issues now
>
> 1) When trying to load the kernel from TFTP, everything is ok but when
> it's trying to mount the rootfs something is not working, even though
> I set th
Hi Javier,
On Sun, Oct 16, 2016 at 11:06:15PM +0200, Javier Fileiv wrote:
> Hi everyone, I've just flashed barebox on my Mini2440. I have 2
> questions/issues now
>
> 1) When trying to load the kernel from TFTP, everything is ok but when
> it's trying to mount the rootfs something is not working,
Hi everyone, I've just flashed barebox on my Mini2440. I have 2
questions/issues now
1) When trying to load the kernel from TFTP, everything is ok but when
it's trying to mount the rootfs something is not working, even though
I set the rootdelay param to 5 secs.
2) I tried also the boot from nand
19 matches
Mail list logo