Hi
Am 06.08.2018 um 10:15 schrieb Mihaita Ivascu:
> Hello,
> Yes, thanks. Setting otg mode manually in barebox helped.
> I have on device side:
> /barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ usbgadget -A /fit(fit)c
> udc0: registering UDC driver [g_multi]
> multi_bind: creating
Am 03.08.2018 um 18:37 schrieb Mihaita Ivascu:
> Hi,
>
> I have usb controller configured for OTG both in .config and
> device tree sources. But still usbgadget complains about not finding
try:
otg.mode=peripheral
usbgadget (your options)
>
> Thanks,
>Mihaita
> On Fri, Aug 3, 2018
Hi,
I have usb controller configured for OTG both in .config and
device tree sources. But still usbgadget complains about not finding
UDC
Thanks,
Mihaita
On Fri, Aug 3, 2018 at 10:38 AM Oleksij Rempel wrote:
>
> Hi
>
> Am 03.08.2018 um 10:21 schrieb Mihaita Ivascu:
> > Hello,
> >
> >
Hi
Am 03.08.2018 um 10:21 schrieb Mihaita Ivascu:
> Hello,
>
> On the topic of enabling fastboot in barebox 2018.04, I have
> enabled USB gadget support:
> USB_GADGET_DRIVER_ARC=y
> USB_GADGET_AUTOSTART=y
> USB_GADGET=y
> USB_GADGET_FASTBOOT=y
> USB_GADGET_FASTBOOT_SPARSE=y
>
>
Hello,
On the topic of enabling fastboot in barebox 2018.04, I have
enabled USB gadget support:
USB_GADGET_DRIVER_ARC=y
USB_GADGET_AUTOSTART=y
USB_GADGET=y
USB_GADGET_FASTBOOT=y
USB_GADGET_FASTBOOT_SPARSE=y
I am using board and BSP from Phytec for imx6ul evk. I have
reviews
Thanks for the info. i got that already. Some configs that should be
enabled are not to be found in my barebox yet.
I will work on it and if I am not successful maybe I will return with
a question.
Best regards,
Mihaita
On Fri, Jul 20, 2018 at 11:57 AM Oleksij Rempel wrote:
>
> Am
Am 20.07.2018 um 11:32 schrieb Mihaita Ivascu:
> Hi,
>
>I have both Android Fastboot support and Fastboot sparse image
> support enabled in barebox config(is by default) but I see not device
> node created when connecting USB device nor do I see any fastboot
> commands in barebox shell.
>
Hi,
I have both Android Fastboot support and Fastboot sparse image
support enabled in barebox config(is by default) but I see not device
node created when connecting USB device nor do I see any fastboot
commands in barebox shell.
My question is: how do I use fastboot? What is the complete
On Wed, Jul 18, 2018 at 09:39:23AM +0200, Mihaita Ivascu wrote:
> Hello,
>
> I would like to flash a barebox image on NAND for a Phytec imx6ul
> evk board using MFGTools.
> I have added support for UTP protocol in kernel image so commands
> could be "pushed" using MFGtools app from
Hi,
Yes, thanks for your answer. That is true. Also I think mtd-utils
from withing Linux will not work also to update barebox mtd partition?
I have tried using kobs-ng init command from with Linux(as an
alternative to barebox_update) and it did seem it writes additional
BBU and other
On Thu, 2018-07-19 at 07:08 +0200, Oleksij Rempel wrote:
> > Aside from this issue, are you aware of any method of
> > flashing the barebox on NAND from Linux(after the kernel was loaded
> > successfully on the target) ?
> > barebox_update does not exist in Linux obviously and porting
On 18.07.2018 19:56, Mihaita Ivascu wrote:
> Ok, thanks. I will take a look. I think for that scenario I
> do not need fastboot. Once I have barebox in RAM I can do
> barebox_update to flash it in NAND, reboot and then run a script from
> USB
> that created partitions in NAND and
Ok, thanks. I will take a look. I think for that scenario I
do not need fastboot. Once I have barebox in RAM I can do
barebox_update to flash it in NAND, reboot and then run a script from
USB
that created partitions in NAND and copies FIT image(which contains
kernel+rootfs) on NAND
Am 18.07.2018 um 17:11 schrieb Mihaita Ivascu:
> Hi,
>
> Thanks for answer.
> I think I need it to do it from Windows as we have some boards
> that need to be updated in the factory by people that do not necessary
> have Linux skills or Linux workstation.
> That is why we thought we
Hi,
Thanks for answer.
I think I need it to do it from Windows as we have some boards
that need to be updated in the factory by people that do not necessary
have Linux skills or Linux workstation.
That is why we thought we could use MFGtools app.
My problem is that the board we
On Wed, 2018-07-18 at 15:53 +0200, Bastian Stender wrote:
> Hi,
>
> On 07/18/2018 03:01 PM, Oleksij Rempel wrote:
> > you email is in the list. (well, different version of it are already
> > in the list). Please wait if some one can respond here.
> >
> > I'm not an expert, but probably what you
Hi,
On 07/18/2018 03:01 PM, Oleksij Rempel wrote:
you email is in the list. (well, different version of it are already
in the list). Please wait if some one can respond here.
I'm not an expert, but probably what you need is
https://github.com/rauc
Have a look here:
Hi,
you email is in the list. (well, different version of it are already in
the list).
Please wait if some one can respond here.
I'm not an expert, but probably what you need is https://github.com/rauc
Am 18.07.2018 um 14:05 schrieb Mihaita Ivascu:
> Hi ,
>
>
>
> I would like to flash a
18 matches
Mail list logo
