Re: [PATCH] Documentation: boards: stm32mp: document eMMC boot configuration
On Fri, Aug 28, 2020 at 07:31:15PM +0200, Bastian Krause wrote: > From: Ahmad Fatoum > > In order to boot from eMMC on the STM32MP15x, the boot_ack bit in the > ext_csd register must be set. Document this and while at it, fix a > misformatted code block in the same section. > > Signed-off-by: Ahmad Fatoum > Signed-off-by: Bastian Krause > --- > Documentation/boards/stm32mp.rst | 13 - > 1 file changed, 12 insertions(+), 1 deletion(-) Applied, thanks Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0| Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917- | ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH] Documentation: boards: stm32mp: document eMMC boot configuration
From: Ahmad Fatoum In order to boot from eMMC on the STM32MP15x, the boot_ack bit in the ext_csd register must be set. Document this and while at it, fix a misformatted code block in the same section. Signed-off-by: Ahmad Fatoum Signed-off-by: Bastian Krause --- Documentation/boards/stm32mp.rst | 13 - 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst index 7c657eb990..b235c39927 100644 --- a/Documentation/boards/stm32mp.rst +++ b/Documentation/boards/stm32mp.rst @@ -64,7 +64,7 @@ An appropriate image for a SD-Card can be generated with following } For eMMC, the boot partitions are used as the FSBL partitions and so the user -partitions may look like this: +partitions may look like this:: image @STM32MP_BOARD@.img { partition ssbl { @@ -80,6 +80,17 @@ partitions may look like this: The fsbl1 and fsbl2 can be flashed by writing to barebox ``/dev/mmcX.boot0`` and ``/dev/mmcX.boot1`` respectively or from a booted operating system. +Additionally, the eMMC's ``ext_csd`` register must be modified to activate the +boot acknowledge signal (``BOOT_ACK``) and to select a boot partition. + +Assuming ``CONFIG_CMD_MMC_EXTCSD`` is enabled and the board shall boot from +``/dev/mmc1.boot1``:: + + mmc_extcsd /dev/mmc1 -i 179 -v 0x50 + +The STM32MP1 BootROM does *not* support booting from eMMC without fast boot +acknowledge. + Boot source selection - -- 2.28.0 ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH] Documentation: boards: stm32mp: document eMMC boot configuration
On Mon, May 18, 2020 at 08:36:56AM +0200, Sascha Hauer wrote: > On Wed, May 13, 2020 at 02:53:48PM +0200, Ahmad Fatoum wrote: > > In order to boot from eMMC on the STM32MP15x, the boot_ack bit in the > > ext_csd register must be set. Document this and while at it, fix a > > misformatted code block in the same section. > > > > Signed-off-by: Ahmad Fatoum > > --- > > Documentation/boards/stm32mp.rst | 10 +- > > 1 file changed, 9 insertions(+), 1 deletion(-) > > Applied, thanks And dropped again until it's clear if we really want to handle this with a device parameter. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0| Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917- | ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH] Documentation: boards: stm32mp: document eMMC boot configuration
On Wed, May 13, 2020 at 02:53:48PM +0200, Ahmad Fatoum wrote: > In order to boot from eMMC on the STM32MP15x, the boot_ack bit in the > ext_csd register must be set. Document this and while at it, fix a > misformatted code block in the same section. > > Signed-off-by: Ahmad Fatoum > --- > Documentation/boards/stm32mp.rst | 10 +- > 1 file changed, 9 insertions(+), 1 deletion(-) Applied, thanks Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0| Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917- | ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
[PATCH] Documentation: boards: stm32mp: document eMMC boot configuration
In order to boot from eMMC on the STM32MP15x, the boot_ack bit in the ext_csd register must be set. Document this and while at it, fix a misformatted code block in the same section. Signed-off-by: Ahmad Fatoum --- Documentation/boards/stm32mp.rst | 10 +- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst index 607c59fd0757..fc8a68cf4142 100644 --- a/Documentation/boards/stm32mp.rst +++ b/Documentation/boards/stm32mp.rst @@ -63,7 +63,7 @@ An appropriate image for a SD-Card can be generated with following } For eMMC, the boot partitions are used as the FSBL partitions and so the user -partitions may look like this: +partitions may look like this:: image @STM32MP_BOARD@.img { partition ssbl { @@ -79,6 +79,14 @@ partitions may look like this: The fsbl1 and fsbl2 can be flashed by writing to barebox ``/dev/mmcX.boot0`` and ``/dev/mmcX.boot1`` respectively or from a booted operating system. +Additionally, the eMMC's ``ext_csd`` register must be modified to activate the +boot acknowledge signal and to select a boot partition, e.g.:: + + mmcX.boot_ack=1 + mmcX.boot=boot0 + +The STM32MP1 BootROM does *not* support booting eMMC without fast boot acknowledge. + Boot source selection - -- 2.26.2 ___ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox