not do it inside of
dma_set_mask?
Anyway, as I said I'm fine with this.
FWIW: Last July, I posted this patch for dma_set_mask to the linux-mips
list. It never went anywhere.
Steve
Add support for non-coherent dma to dma_set_mask for mips processors.
Signed-off-by: Steve Brown [EMAIL
Michael Buesch wrote:
On Wednesday 30 July 2008 19:31:00 Steve Brown wrote:
Guillermo Javier Nardoni wrote:
Hi guys, once again... Me.
I'm wandering if BCM43xx actually does support for virtual AP,
What i mean for VAP is to bradcast more than one SSID being in AP mode or
AdHoc
Michael Buesch wrote:
On Wednesday 30 July 2008 19:31:00 Steve Brown wrote:
Guillermo Javier Nardoni wrote:
Hi guys, once again... Me.
I'm wandering if BCM43xx actually does support for virtual AP,
What i mean for VAP is to bradcast more than one SSID being in AP mode
Guillermo Javier Nardoni wrote:
Hi guys, once again... Me.
I'm wandering if BCM43xx actually does support for virtual AP,
What i mean for VAP is to bradcast more than one SSID being in AP mode or
AdHoc mode
For example: PUBLIC_SSID for those who want to connect to the AP and
PRIVATE_SSID
Michael Buesch wrote:
On Thursday 03 July 2008 18:30:18 Felipe Maya wrote:
Hi, I have applied this patch and i tested on a wl500gpv2 (BCM5354). The
following part disable the ethernet device. If this part of the patch is
restored the device work ok.
Well, I would say your
This same card works on an x86 and on this wl500gp (bcm4704) w/ asus
code. If I flash the same image on a bcm5352 (whr-hp-g54), the driver
loads, the firmware loads and I get scan results.
Both the x86 and the wl500gp used the same ssb code and b43 code and
firmware. I'm using yesterday's
It hangs on b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); If I
ignore the case where phy.type is 0, I get a little further, but it
still fails. That output is included too.
The test rig is a bcm5354 in an Asus wl520gu and the b43, cfg, mac
drivers are from a several day old wireless-testing
Jory A. Pratt wrote:
Michael Buesch wrote:
On Wednesday 24 January 2007 20:08, Larry Finger wrote:
Michael Buesch wrote:
On Wednesday 24 January 2007 19:39, Larry Finger wrote:
switch (led_index) {
case 0:
led-behaviour =
Steve Brown wrote:
I'm using a recent snap (wpa_supplicant-0.6-2006-12-11) and the
current wireless-dev w/ the PHYmode mods backed out so bcm43xx-d80211
compiles. The module (WL-120G V2A) is from an ASUS wl500-gp and
installed in x86 development machine using a mini-pci to pci adapter
I'm using a recent snap (wpa_supplicant-0.6-2006-12-11) and the current
wireless-dev w/ the PHYmode mods backed out so bcm43xx-d80211 compiles.
The module (WL-120G V2A) is from an ASUS wl500-gp and installed in x86
development machine using a mini-pci to pci adapter. I'm using firmware
10 matches
Mail list logo
