[beagleboard] Re: Beaglebone Connection

On Tuesday, January 14, 2014 4:42:42 PM UTC+5:30, william...@gmail.com wrote: > > I have a problem with the u-boot of my Beaglebone black. Actually when i > set up Android on my Sd card, i wasn't able to detect the serial device USB > anymore . > Before that i installed Angstrom and everythin

[beagleboard] Can one boot a beagleboard xm from a ssd?

I have been playing with a Raspberry Pi and am building a wireless robot controller with a 64gb ssd. I haven't found out if I can replace the slow SD card to boot and run with a partition of !024mb of swap to speed up operations. Anyone use BB xm to run 3d printers? -- For more options, visi

Re: [beagleboard] "Forbidden" pins on P8 and P9

And, you shouldn't rely on the pull up/down pins that are there now since they could change with the next beaglebone (as they did between the black and white). You can make them high impedance at boot by using something like a bilateral switch enabled with 3V3_EXP. On Tuesday, January 14, 2014

Re: [beagleboard] LiPo power cape for Beagle Bone.

Mike, The recommended max input is 12V on that regulator but the absolute is 17V. I haven't had any issues above 12V yet but I also haven't stuck it in my car. I've mostly been using it with 1S, 2S, and 3S LiPoly packs. You are correct, voltage above 15V will eventually trip the PTC but it's

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On 1/14/14, 7:32 PM, "Robert Nelson" wrote: >> Hi Robert, >> >> What is the quad/a9? > >It's just the imx6 1Ghz/quad/2GB/sata system from boundary devices.. >It's nice and fast when doing native builds. (such as chromium) Nice. > >> BTW, have you done any work on OMAP5? > >I have one.. It doesn'

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

> Hi Robert, > > What is the quad/a9? It's just the imx6 1Ghz/quad/2GB/sata system from boundary devices.. It's nice and fast when doing native builds. (such as chromium) > BTW, have you done any work on OMAP5? I have one.. It doesn't really like to boot at the moment. There's a few nice git re

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On 1/14/14, 2:29 PM, "Robert Nelson" wrote: >On Tue, Jan 14, 2014 at 4:17 PM, Dennis Cote wrote: >> >> On Tuesday, January 14, 2014 3:06:39 PM UTC-7, Dennis Cote wrote: >>> >>> How do I use this link to update the script? I'm quite new to git. >>> >> >> Google answered that one I think. I did >

Re: [beagleboard] Re: try to Build LCD7 cape

From: Samer Shatta Reply-To: Date: Tuesday, January 14, 2014 at 10:49 AM To: Subject: Re: [beagleboard] Re: try to Build LCD7 cape > ok > if i had no eeprom in my LCD cape design, and connect my lcd to the BBB and > open cap manager and echo the compiled device tree of my cap to the cape

Re: [beagleboard] Missing packages in Ubuntu 13.04 on BeagleBone Black

Good luck! It would be awesome. Sent from my iPhone On Jan 14, 2014, at 18:14, Andrew Dai wrote: > Well crap... I'll look into it more deeply this weekend... no promises > > > On Tue, Jan 14, 2014 at 8:52 PM, Rick wrote: >> Nope. I've barely gotten to where I can install autoconf-based

Re: [beagleboard] Missing packages in Ubuntu 13.04 on BeagleBone Black

Well crap... I'll look into it more deeply this weekend... no promises On Tue, Jan 14, 2014 at 8:52 PM, Rick wrote: > Nope. I've barely gotten to where I can install autoconf-based stuff. ROS > is stupidly complicated. > > On Jan 14, 2014, at 17:50 , Andrew Dai wrote: > > > That's disappoi

Re: [beagleboard] Adding Cape Support of BBB in Beagleboard git repo

On Sunday, January 12, 2014 8:18:43 PM UTC-5, David Marquart wrote: > > if you are using Roberts kernel building scripts all you need to do is add > the DTS file to /KERNEL/firmware/capes and add it to the build list in > /KERNEL/firmware/Makefile . Then run ./tools/rebuild.sh and > ./install

Re: [beagleboard] Angstrom Release

On Monday, January 13, 2014 12:22:55 PM UTC-5, RobertCNelson wrote: > > >I would like to know when will be the next official release > of > > Angstrom image for Beaglebone black. > > We have developed a camera cape board > > (http://www.radiumboards.com/HD_Camera_Cape_fo

Re: [beagleboard] Missing packages in Ubuntu 13.04 on BeagleBone Black

Nope. I've barely gotten to where I can install autoconf-based stuff. ROS is stupidly complicated. On Jan 14, 2014, at 17:50 , Andrew Dai wrote: > That's disappointing... Do you happen to know which packages that > ros-hydro-ros-base installs in particular? > I only need the most basic function

Re: [beagleboard] Missing packages in Ubuntu 13.04 on BeagleBone Black

That's disappointing... Do you happen to know which packages that ros-hydro-ros-base installs in particular? I only need the most basic functionality (no fancy libraries) ... so maybe I can install them manually? Compiling from source is something I am completely unfamiliar with. On Tue, Jan 14,

Re: [beagleboard] Missing packages in Ubuntu 13.04 on BeagleBone Black

Nope, no luck, got discouraged and haven't tried. On Jan 14, 2014, at 17:35 , Andrew Dai wrote: > Have you had any luck installing ROS on 13.04? > I flashed Ubuntu 13.04 to my BBB and had trouble installing ROS (I think it > stopped at the same roslisp dependency) > Do you know how to fix that?

Re: [beagleboard] Missing packages in Ubuntu 13.04 on BeagleBone Black

Have you had any luck installing ROS on 13.04? I flashed Ubuntu 13.04 to my BBB and had trouble installing ROS (I think it stopped at the same roslisp dependency) Do you know how to fix that? Would switching to Debian be of any use or do I have to build ROS from source/how do I do that? On Monda

Re: [beagleboard] BBB is loaded with XAM3359AZCZ100. can we do a drop in replacement with AM3359ZCZD72?

Thanks, Gerald. Really appreciate your prompt reply!!! On Tuesday, January 14, 2014 11:52:48 AM UTC-8, Gerald wrote: > > As long as you make sure the SW runs as it relates to speed. Not lal > processors rated at 720MHz will run at 1GHz under all operating conditions. > . As to the HW, all parts

RE: [beagleboard] Re: Build a QT/11 application for beagleboard black by cross compiling from ubuntu

From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Louis McCarthy Sent: Tuesday, January 14, 2014 12:23 PM To: beagleboard@googlegroups.com Subject: Re: [beagleboard] Re: Build a QT/11 application for beagleboard black by cross compiling from ubuntu Correcti

[beagleboard] Re: Can't SSH to the bone

This might be your issue. It was with mine. https://groups.google.com/d/msg/beagleboard/Ya2qE4repSY/q8_WkLcH5TwJ On Tuesday, January 14, 2014 1:35:59 PM UTC-8, Steve Rayner wrote: > > I've connected the Beaglebone Black via USB cable. I'm using Windows7 and > I've installed the USB driver. I ca

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On Tue, Jan 14, 2014 at 4:17 PM, Dennis Cote wrote: > > On Tuesday, January 14, 2014 3:06:39 PM UTC-7, Dennis Cote wrote: >> >> How do I use this link to update the script? I'm quite new to git. >> > > Google answered that one I think. I did > > git pull > > in the directory I had cloned from gith

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On Tuesday, January 14, 2014 3:06:39 PM UTC-7, Dennis Cote wrote: > How do I use this link to update the script? I'm quite new to git. > > Google answered that one I think. I did git pull in the directory I had cloned from github. It updated the correct file as expected. Dennis Cote --

[beagleboard] Re: BeagleBone Black Book

Oops, sorry, here is the correct link: http://www.packtpub.com/beaglebone-robotic-projects/book Richard On Monday, January 13, 2014 3:36:13 PM UTC-7, richard.g...@gmail.com wrote: > > I hope it is OK, but I would like to make folks aware of my new Book on > BeagleBone Black Robotics Projects.

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On Tue, Jan 14, 2014 at 4:06 PM, Dennis Cote wrote: > My build on the BBB itself just failed in *exactly* the same fashion. I got > the same error after starting to clone Cloud9. Also, the same follow on > errors since I hadn't fixed the script as you did in your patch. I think this was the real

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

My build on the BBB itself just failed in *exactly* the same fashion. I got the same error after starting to clone Cloud9. Also, the same follow on errors since I hadn't fixed the script as you did in your patch. So this does not look like it is caused by qemu. Interestingly, I think this build

[beagleboard] When GPIO overlay is necessary ?

Hi BBB experts, i've studied some tutorials about GPIO overlay and everything is working but i wonder when is really necessary to build an overlay to set my pins ... my application runs anyway if i don't make an overlay and i use only export - setdirection - setvalue. thanks everyone. Regards

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On 1/14/2014 2:27 PM, Robert Nelson wrote: > > BTW: due to issues with qemu across the board, I only run this script > on native arm hardware (Debian Jessie).. As a point of reference, I have run all the MachineKit builds on a fairly potent amd64 Debian Wheezy box (16-core Opteron 6320) with the

[beagleboard] Re: Struggling to find detailed information on how to make capes for the BBB

On Sunday, May 26, 2013 1:53:01 PM UTC-4, woss...@gmail.com wrote: > > I'd like to find a good and detailed source of information on how to > create a well-integrated BBB Cape design. I have put together a bare-bones > cape which is just an EEPROM chip running off the BBB's 3.3v line. The >

[beagleboard] Can't SSH to the bone

I've connected the Beaglebone Black via USB cable. I'm using Windows7 and I've installed the USB driver. I can get the 101 page via a web browser, but I cannot connect to the beaglebone over SSH. If I try to connect via SSH using putty, I get; client unexpectedly closed the connection. If I try

Re: [beagleboard] DSP and Beagleboard xM

From: Teknoman117 Reply-To: Date: Monday, January 13, 2014 at 9:58 PM To: Subject: [beagleboard] DSP and Beagleboard xM > I've been away from my Beagleboard xM for a few months, but last time I really > dug into it, kernel 3.8 did not have any support for the dsplink type software > we c

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

> Yes, you are correct. A Ubuntu 13.10 VM running on virtualbox. > > Linux dennis-VirtualBox 3.11.0-15-generic #23-Ubuntu SMP Mon Dec 9 18:17:04 > UTC 2013 x86_64 x86_64 x86_64 GNU/Linux > >> what version of qemu-arm-static >> >> qemu-arm-static -version > > qemu-arm version 1.5.0 (Debian 1.5.0+dfs

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On Tuesday, January 14, 2014 1:27:44 PM UTC-7, RobertCNelson wrote: > > I'm guessing this was on x86? > > So what OS and what version and Yes, you are correct. A Ubuntu 13.10 VM running on virtualbox. Linux dennis-VirtualBox 3.11.0-15-generic #23-Ubuntu SMP Mon Dec 9 18:17:04 UTC 2013 x86_

Re: [beagleboard] new beaglebone image-builder script fails when downloading Cloud9

On Tue, Jan 14, 2014 at 1:57 PM, Dennis Cote wrote: > I tried to use the image builder linked at the end of > http://www.beagleboard.org/blog/2014-01-04-happy-new-year/ to build a new > Debian based image for a BBB. I used the following commands in my home > directory to download and run the image

Re: [beagleboard] LiPo power cape for Beagle Bone.

A couple observations on designing a Li-Po (or general power supply cape, no matter what the power source) 1. the charger can be separate and it makes the design much easier. RC Li-Po packs are plentiful as are the chargers for them just build a cape that allows running off one of those. 2.

[beagleboard] new beaglebone image-builder script fails when downloading Cloud9

I tried to use the image builder linked at the end of http://www.beagleboard.org/blog/2014-01-04-happy-new-year/ to build a new Debian based image for a BBB. I used the following commands in my home directory to download and run the image builder script. mkdir BBB cd BBB git clone https://githu

Re: [beagleboard] BBB is loaded with XAM3359AZCZ100. can we do a drop in replacement with AM3359ZCZD72?

As long as you make sure the SW runs as it relates to speed. Not lal processors rated at 720MHz will run at 1GHz under all operating conditions. . As to the HW, all parts are the same footprint and they can be therefore mounted onto the same PCB. Gerald On Tue, Jan 14, 2014 at 1:27 PM, sunvale

Re: [beagleboard] BBB is loaded with XAM3359AZCZ100. can we do a drop in replacement with AM3359ZCZD72?

Thanks for the reply. According to the description in its website, Beaglebone Black supports AM335x ARM Cortex-A8. Does that mean all AM3352/3354/3356/3358/3359 with the same packages will run on this platform? Processor: AM335x 1GHz ARM® Cortex-A8 On Tuesda

Re: [beagleboard] Re: try to Build LCD7 cape

ok if i had no eeprom in my LCD cape design, and connect my lcd to the BBB and open cap manager and echo the compiled device tree of my cap to the cape manager manually . does it work ?? i know that the eeprom function is only to tell the BBB when i connect my cape to load the Overlay of my cap

[beagleboard] Re: Struggling to find detailed information on how to make capes for the BBB

One heads up on a mistake I made that Zachary Thorson debugged for me, and explained: https://groups.google.com/forum/#!searchin/beagleboard/Zacharary$20Thorson/beagleboard/ZLSuKKM9Im4/bKqP9-Eu0NEJ You could possibly have conflict with Adafruits Python BBIO.ADC module with: target = <&oc

Re: [beagleboard] Re: Build a QT/11 application for beagleboard black by cross compiling from ubuntu

Correction, export PATH=$PATH:/usr/local/angstrom/arm/bin I forgot the last bin. On Tuesday, January 14, 2014 11:20:46 AM UTC-6, Louis McCarthy wrote: > > Did you install the right toolchain for your host, 32 bit or 64 bit. If 64 > bit you need to include the ia32-libs (apt-get install). > >

Re: [beagleboard] Re: Build a QT/11 application for beagleboard black by cross compiling from ubuntu

Did you install the right toolchain for your host, 32 bit or 64 bit. If 64 bit you need to include the ia32-libs (apt-get install). I would also add /usr/local/angstrom/arm/ to your path: export PATH=$PATH:/usr/local/angstrom/arm Then try the arm-[tab][tab] again. On Tuesday, January 14, 2014 9

Re: [beagleboard] Re: Build a QT/11 application for beagleboard black by cross compiling from ubuntu

I think you have pointed the platform compiler to the arm compiler. This would produce a "file not found" because it is an arm binary and not a host binary. You need a host compiler to build a local version of qmake, which will then invoke the toolchain compiler You do need a host version of G+

[beagleboard] Re: BeagleBone Black Book

Richard: Sounds like it could be a good resource to the community. However I don't think you have the right link. --Mark On Monday, January 13, 2014 5:36:13 PM UTC-5, richard.g...@gmail.com wrote: > > I hope it is OK, but I would like to make folks aware of my new Book on > BeagleBone Black

[beagleboard] Interfacing of usb camera to bbb

I am using logitech c100 camera to implement a basic capture program using opencv functions I've used the code to capture an image from the Prof.Derek Molloy's tutorial However when I run the program in vi editor..I get the following error: VIDIOC_QUERYMENU : Invalid argument I tired changing t

Re: [beagleboard] Re: chipsee beaglebone lcd/dvi expansion kernel support

Did you happen to get around to this? On Friday, January 10, 2014 2:49:29 AM UTC-6, Christian Ruocco wrote: > > Hi guys, > > I’ll get on that when I have a moment. Probably this weekend! > > l8r, > > Xris > > > On 09 Jan 2014, at 19:16, crystal@gmail.com wrote: > > I would like to see that im

RE: [beagleboard] Re: Build a QT/11 application for beagleboard black by cross compiling from ubuntu

Yeah, there are two dashes before version. The g++ in that folder is just a symbolic link to another file which is two directories down in the bin folder. Does this file exist relative to the original folder: ../../bin/arm-angstrom-linux-gnueabi-g++ Which I believe is this file: /usr/local

Re: [beagleboard] Re: try to Build LCD7 cape

i can't buy one from 4D Systems or CircuitCo cause the Export operation to my country is so hard and cost me a lot of money, so if there is another way to find the eeprom contents that will be a good solution for me . On Monday, January 13, 2014 11:56:34 PM UTC-8, Terry Storm wrote: > > Most of

[beagleboard] Re: Reading a Quadrature Encoder connected to a Beaglebone [black]

Hi, I have the same issue. When loading the equep0 slot I get: [ 1598.682521] bone-capemgr bone_capemgr.8: part_number 'bone_eqep0', version 'N/A' [ 1598.682703] bone-capemgr bone_capemgr.8: slot #9: generic override [ 1598.682754] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at

[beagleboard] Re: Reading a Quadrature Encoder connected to a Beaglebone [black]

Hi, same issue here. I get the following error when trying to load the slot: [ 1598.682521] bone-capemgr bone_capemgr.8: part_number 'bone_eqep0', version 'N/A' [ 1598.682703] bone-capemgr bone_capemgr.8: slot #9: generic override [ 1598.682754] bone-capemgr bone_capemgr.8: bone: Using override e

Re: [beagleboard] "Forbidden" pins on P8 and P9

Take care you don't change one of the SYSBOOT pin's value by your own pullup/pulldown. This happend on my cape, so that the automatic clock detection does not work and we're getting wrong system time. A kernel patch solves that, but it may become worse if touching others. Günter (dl4mea) -- Fo

Re: [beagleboard] Re: bricked my bb-xm?

Sorry. I sent you the wrong link. You need to create a new SD card. http://www.elinux.org/Beagleboard:BeagleBoard-xM#Image_Files Gerald On Tue, Jan 14, 2014 at 8:27 AM, HARSHIT SINHA wrote: > uboot file can not download 404 not found > > On Tuesday, 14 January 2014 17:10:10 UTC+5:30, HARSHI

Re: [beagleboard] LiPo power cape for Beagle Bone.

Hi Ron Did you cater for inputs above 14V? If powering from 12V lead-acid batteries, they typically charge at 14.4-15V but I'd certainly expect spikes of higher and I wouldn't want to plug in anything that couldn't take up to 16V safely. I see you have a 15V zener on there so the regulator won't r

[beagleboard] Re: bricked my bb-xm?

uboot file can not download 404 not found On Tuesday, 14 January 2014 17:10:10 UTC+5:30, HARSHIT SINHA wrote: > > beagleboard does not boot. it was working normally but when i am driving a > stepper motor i restart it with restart buttonn and bb-xm does not boot.. i > have tried all three image

Re: [beagleboard] Re: bb-xm does not boot

On Tue, Jan 14, 2014 at 8:15 AM, HARSHIT SINHA wrote: > apart jokes what i can do ? Thought it was obvious, get a new board, this time don't fry it.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message beca

[beagleboard] Re: bb-xm does not boot

apart jokes what i can do ? On Tuesday, 14 January 2014 18:43:07 UTC+5:30, HARSHIT SINHA wrote: > > i have inserted sd-card into bbxm but my bb-xm does not boot today ... > normally it boots but it doesnot boot today. only power light lit up help > > > > > > regards > -- For more options, visit

Re: [beagleboard] Is it safe to connect the mini USB and 5V barrel cables at the same time?

There is no issue to connect the USB cable and the power. That is what the board was designed to do. Both the BeagleBone and BeagleBone Black have the same design. Gerald On Tue, Jan 14, 2014 at 2:20 AM, wrote: > I was wondering if there is any problem with this configuration. I need to > con

Re: [beagleboard] bricked my bb-xm?

Did you check the support Wiki? http://www.elinux.org/Beagleboard:Updating_The_Software Gerald On Tue, Jan 14, 2014 at 5:40 AM, HARSHIT SINHA wrote: > beagleboard does not boot. it was working normally but when i am driving a > stepper motor i restart it with restart buttonn and bb-xm does no

Re: [beagleboard] DSP and Beagleboard xM

On Mon, Jan 13, 2014 at 11:58 PM, Teknoman117 wrote: > I've been away from my Beagleboard xM for a few months, but last time I > really dug into it, kernel 3.8 did not have any support for the dsplink type > software we could use on the beagle board xM a few years ago. I remember > someone mentio

Re: [beagleboard] Booting Issue beaglebone black

After the flashing did you remove the power from the board as instructed? http://www.elinux.org/Beagleboard:Updating_The_Software Gerald On Tue, Jan 14, 2014 at 2:50 AM, Jay wrote: > My BBB doesn't boot, I tried flashing it with factory Angstrom image > available at beagleboard.org website.

Re: [beagleboard] BBB is loaded with XAM3359AZCZ100. can we do a drop in replacement with AM3359ZCZD72?

That device has a maximum frequency of 720MHZ. The one on the BBB runs at 1GHZ. I suspect this 720 device will run but may bot run n all devcies as it was tested to show that it can't run in all cases at 1GHZ. Gerald On Mon, Jan 13, 2014 at 6:38 PM, sunvale wrote: > the latter is available f

Re: [beagleboard] BBB is loaded with XAM3359AZCZ100. can we do a drop in replacement with AM3359ZCZD72?

you can replace it. No software changes are needed 2014/1/14 sunvale > the latter is available for public from TI. I hope no configuration > changes needed for angstrom/ubuntu distributions. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message becau

Re: [beagleboard] LiPo power cape for Beagle Bone.

Sorry for the late reply on this thread but it just popped back to the top of the list and caught my attention. I've been powering my BeagleBone from RC batteries for some time now. The most versatile method that I've been using is a buck/boost power "bar" that attaches to the expansion connec

[beagleboard] Beaglebone Connection

I have a problem with the u-boot of my Beaglebone black. Actually when i set up Android on my Sd card, i wasn't able to detect the serial device USB anymore . Before that i installed Angstrom and everythings work well so the Beaglebone isn't the problem but only the boot. Is there some configu

[beagleboard] Is it safe to connect the mini USB and 5V barrel cables at the same time?

I was wondering if there is any problem with this configuration. I need to connect to the beaglebone throw USB, but I am worried as the connection also acts as a power line. Is it safe for the board to do that? Can be done in both the original Beglebone and the Beaglebone Black? -- For more o

[beagleboard] Videosignal to BBB

Hello, I know there are a few treads for video and the BBB, but I haven't found the right information. I'm new to the BBB, but have experience with Arduino. These are the specs of the camera I'd like to use. http://www.produktinfo.conrad.com/datenblaetter/15-174999/150001-da-01-en-S_W_KAMERA

[beagleboard] BeagleBone Black Book

I hope it is OK, but I would like to make folks aware of my new Book on BeagleBone Black Robotics Projects. I wrote it primarily for my students, but I think others might be interested as well. Here is the link: http://groups.google.com/group/beagleboard/topics Richard -- For more options, vi

[beagleboard] BBB is loaded with XAM3359AZCZ100. can we do a drop in replacement with AM3359ZCZD72?

the latter is available for public from TI. I hope no configuration changes needed for angstrom/ubuntu distributions. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe fro

[beagleboard] Does BBB support drop in replacement with AM3359ZCZD72?

BBB is loaded with Sitara XAM3359AZCZ100. Do the Angstrom and Ubuntu distribution support AM3359ZCZD72 without any configuration changes? Thanks. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleB

[beagleboard] BeagleBone Black Book

Just wondering if it would be OK to post a link to my new Book about using the BeagleBone Black for robotics projects. I wrote primarily for my students, but I'm sure it would be useful to a wider audience. Richard -- For more options, visit http://beagleboard.org/discuss --- You received th

Re: [beagleboard] bb-xm does not boot

On Tue, Jan 14, 2014 at 7:13 AM, HARSHIT SINHA wrote: > i have inserted sd-card into bbxm but my bb-xm does not boot today ... > normally it boots but it doesnot boot today. only power light lit up help Well based on your previous message: https://groups.google.com/d/msg/beagleboard/sAue--l1Hmw/o

[beagleboard] Re: Using uart1 rts and cts

I haven't really looked too hard, but my first guess would be that in uEnv.txt you would need to disable i2c2 pinmux like what is done with hdmi/emmc when you don't want that. On 3.12.6 kernel I had to actually remove pinmux for hdmi before I rebuilt the kernel. On Sunday, December 15, 2013 4

[beagleboard] Re: BBB: after powerfailure BBB is no longer booting from eMMC

I had an issue like this recently, my uEnv.txt file kept getting corrupted for some reason. Put the SD in your desktop and check it out. On Monday, January 13, 2014 7:11:08 AM UTC-6, Martin Sperl wrote: > > Hi! > > A few weeks ago I had debian installed on my BeagleBoneBlack, booting from > emm

[beagleboard] bb-xm does not boot

i have inserted sd-card into bbxm but my bb-xm does not boot today ... normally it boots but it doesnot boot today. only power light lit up help regards -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups

Re: [beagleboard] angstrom bitbake systemd-gnome-image fails

John, That was the trick. I was able to successfully build systemd-image last night. Thanks for the advice! On Mon, Jan 13, 2014 at 3:35 PM, Daniel Metcalf wrote: > Ok I will give that a try as I now the scripts pull v2013.06 that is if > one follows the steps on Angstrom exactly. > > > On Mon

[beagleboard] SPI - SD card

Dear all, I have a question about SPI and SD card. I've already seen a couple of posts with a similar question but the answer is not fully clear to me. I have a beaglebone black. I am booting from SD card. I am using the GPMC bus. I would like to use the SPI1 lines to connect another SD card. I w

[beagleboard] bricked my bb-xm?

beagleboard does not boot. it was working normally but when i am driving a stepper motor i restart it with restart buttonn and bb-xm does not boot.. i have tried all three images (sdcard) that i earlier used but it doesn't boot at all. only one green power light lit up.. plzzz help what to do. i

Re: [beagleboard] Using CGI for system configuration

On Mon, Jan 13, 2014 at 1:03 PM, Denizhan Yerel wrote: > I'm planning to use BBB as a motion controller. There are some parameters > which have to be changed by the user in runtime and no need to create a > fancy frontend so I want to a simple webpage which can be even accessible > with smartphone

Re: [beagleboard] Re: Build a QT/11 application for beagleboard black by cross compiling from ubuntu

Actually if you talk about the qmake.conf : this is not a problem as it's easy to change the paths to a different toolchain in there ( to point to -gcc -ld, etc) . I'd rather prefer to use the power of my PC to compile all and send binaries to the BBB . the ldd I have done was to show what were mis

[beagleboard] Booting Issue beaglebone black

My BBB doesn't boot, I tried flashing it with factory Angstrom image available at beagleboard.org website. The 4 LEDs light up and the process is completed. But doesn't boot even after that. To see what is happening I connected my Serial to USB converter to the BBB and using Putty I saw the U-B

[beagleboard] Gstreamer with Beagle Xm RevC

Hi all! I have a BeagleboardXm RevC with dm3730 processor and I want to use Gstreamer for video stream. I've used the dvsdk4.01 and the beagleboard's script from this site: http://sourceforge.net/projects/dvsdkbbxm/files/DVSDK-4.01%20for%20BeagleBoard/DVSDK%20for%20BB%20xM-C/Source%20files/