Robert Nelson robertcnel...@gmail.com wrote:
On Wed, Aug 12, 2015 at 9:03 AM, c...@isbd.net wrote:
I'm trying to update an old[is] BBB debian installation.
When I do 'apt-get update' it mostly works but I'm getting the
following errors:-
Get:6 http://repos.rcn-ee.net wheezy
Please let us know how the jumping RX to 3V3 line works out. If I recall
correctly, the RX line is pulled down to ground which didn't make sense to
me as generally an asserted RX state is considered idle (if memory serves
me correctly). What resistance are you using? Modifying u-boot is not
I have version 4.1.4-ti-r8.1 operating on a total of 21 boards now.
Uptime 18h for most of them, one even 1 day 20h, without any reboot.
Good work!
I understand this is a development build from Robert, is there a
planning for something that is released more officially?
Thanks a lot for all
Hi,
The BBB is running fine under the Debian image on the eMMC
I have been able to use on several displays through the uHDMI connector and
also using the 4DCAPE-70T LCD
http://www.4dsystems.com.au/product/4DCAPE_70T/
So I'm sure my hardware is OK.
For a new project I need to use OpenSuse on
On Wed, Aug 12, 2015 at 9:14 AM, c...@isbd.net wrote:
Robert Nelson robertcnel...@gmail.com wrote:
On Tue, Aug 11, 2015 at 3:42 PM, c...@isbd.net wrote:
Robert Nelson robertcnel...@gmail.com wrote:
On Fri, Aug 7, 2015 at 11:36 AM, c...@isbd.net wrote:
I have a BBB running Debian
Robert Nelson robertcnel...@gmail.com wrote:
On Tue, Aug 11, 2015 at 3:50 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Tue, Aug 11, 2015 at 3:42 PM, c...@isbd.net wrote:
Robert Nelson robertcnel...@gmail.com wrote:
On Fri, Aug 7, 2015 at 11:36 AM, c...@isbd.net wrote:
I have
Yesterday beaglebone black(bbb) was connected to wireless using both router
and mobile wireless hotspot. But today interestingly it is not successful
to establish wireless connection through router, but can connect via mobile
hotspot. What kind of router setting may be causing this? I didn't
Thanks Robert.
But I'm using sysvinit, and without udev this board.
Other suggestion?
Em terça-feira, 11 de agosto de 2015 18:52:27 UTC-3, RobertCNelson escreveu:
On Tue, Aug 11, 2015 at 4:43 PM, Cleiton Bueno cleito...@gmail.com
javascript: wrote:
Customize a Linux distribution with
Hi Günter,
On Wed, Aug 12, 2015 at 10:22 AM, Koellner Guenter dl4...@yahoo.de wrote:
I have version 4.1.4-ti-r8.1 operating on a total of 21 boards now. Uptime
18h for most of them, one even 1 day 20h, without any reboot.
Good work!
I understand this is a development build from Robert, is
On Wed, Aug 12, 2015 at 10:36 AM, Cleiton Bueno cleitonrbu...@gmail.com wrote:
Thanks Robert.
But I'm using sysvinit, and without udev this board.
Other suggestion?
Well
There was a hack in 3.8 to map the keypress to the KEY_BUTTON
On Wed, Aug 12, 2015 at 10:16 AM, mclaire@gmail.com wrote:
Hi,
The BBB is running fine under the Debian image on the eMMC
I have been able to use on several displays through the uHDMI connector and
also using the 4DCAPE-70T LCD
So I'm sure my hardware is OK.
For a new project I need
Hello Robert,
what is the difference between 4.1.4-ti-r9 and 4.1.5-bone15
and which one is the one recommended for future use?
Cheers, Günter
Am 12.08.2015 um 17:38 schrieb Robert Nelson:
Hi Günter,
On Wed, Aug 12, 2015 at 10:22 AM, Koellner Guenter dl4...@yahoo.de wrote:
I have version
This worked... Yea, that's like night and day after the 'git pull'.
Process control on flashing the factory boards?
I don't know if you need '--recursive' somewhere on your git scripts... or
if it's just baked into the file tree...
Attempting to upgrade and possibly downgrade my board if the
all right, but if you reproduced without PM, I'll stick my tests to
vanilla kernels.
2 days and still nothing.
unfortunately gotta reboot though, need to test some other bug on MUSB.
Thanks for testing Felipe.
We might have a weird config setting that's causing it.. Can you
attache
For PRU recommend you have a look at
https://github.com/abhishek-kakkar/BeagleLogic
and also from memory there was a similar CRO application
On Wednesday, 12 August 2015 19:54:02 UTC+10, TJF wrote:
Hi!
Host CPU and TSC_ADC_SS have different clock domains. Internal ADC clock
rate is 24
I know there are several threads regarding wifi but many of these are
outdated so thought I'd start a new thread, asking if anyone has been
successful adding USB WiFi to debian 3.8.13-boneX where they are able to
connect to existing access points AND configure the wifi to act as an
access
On Wed, Aug 12, 2015 at 03:23:03PM -0500, Robert Nelson wrote:
all right, but if you reproduced without PM, I'll stick my tests to
vanilla kernels.
2 days and still nothing.
unfortunately gotta reboot though, need to test some other bug on MUSB.
Thanks for testing Felipe.
We
Hoping you guys can help me out on this:
Goal: High sample rate of one ADC line via a kernel module and a
corresponding user space app
Now I know the PRU would be great for this- and I plan on also writing a
pru version to bench mark the diff but I'm currently trying to get it done
with a
On 08/12/2015 06:51 PM, Maro wrote:
So the goal is almost identical to the generic_buffer.c application
referenced on this wiki [
http://processors.wiki.ti.com/index.php/AM335x_ADC_Driver's_Guide]
It shouldn't matter, but if you are willing to upgrade the kernel (ubuntu
14.04, Linux kernel
I have just upgraded to Windows 10 on a machine that I have not previously
connected my BBB to. I had success on other windows 8 machines as well as
SSHing using Putty. I have spent SOME time searching forums and not
finding much at all on Windows 10. During the install of the Bone_D64.exe,
On Aug 12, 2015 10:13 PM, mscleavite jeff.s...@gmail.com wrote:
I have just upgraded to Windows 10 on a machine that I have not
previously connected my BBB to. I had success on other windows 8 machines
as well as SSHing using Putty. I have spent SOME time searching forums and
not finding much
The photo is my camera output data
8-bit to 16-bit data by attaching to upgrading to a 2-byte hex
Then I'm not sure what to do to try to change the HEX code to an image file
(BMP).
The code is marked in red
On 08/12/2015 04:53 PM, Colin Bester wrote:
USB WiFi to debian 3.8.13-boneX where they are able to connect to
existing access points AND configure the wifi to act as an access point
(master mode) using hostapd.
Not using debian, but ubuntu 15.04 with hostapd in bridge mode, in the 5GHz
wifi
Hi terra ÜÝÜ, thanks for your reply!
Step 1 already done, I' m able to crosscompile and debug my bbb and the
analog inputs are enabled!
V.
Il giorno mercoledì 12 agosto 2015 06:11:03 UTC+2, terra ÜÝÜ ha scritto:
step 1. get the cross compile to work;
I personally use
Hi TJF, thanks for your reply!
I was hoping not to have to resort to use PRUs D: , for now the low
accuracy given by the ADC clock will have to do. (btw why 10 kHz accuracy?
it's caused by Linux non-real-time-ness? Otherwise ADC clock frequency
should be 1,6 MHz max right?)
Other random
Here are my instructions how to solve boot issue on eMMC (see one warning
which I get below):
All commands should be run on BBB as root or add sudo.
Checkout and patch u-boot as described
here:
https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot
Do not
Am Montag, 10. August 2015 15:47:47 UTC+2 schrieb christia...@gmail.com:
Hi folks,
i'm currently working with the PRU of the beagle bone black to read and
decode a SSI Protocol.
Therefore I want to use the build in 28 bit shift register of the PRU. I
found out, that the shift register
Hi!
Host CPU and TSC_ADC_SS have different clock domains. Internal ADC clock
rate is 24 MHz. The theoretical maximum sample rate is 1.6 Msamples/s (= 15
cycles@24MHz in single shot mode) or 1.74 Msamples/s (= 14 cycles in
continous mode). In praxis it's 200 ksamples/s.
The PRUSS are first
On Wed, Aug 12, 2015 at 10:54 AM, Koellner Guenter dl4...@yahoo.de wrote:
Hello Robert,
what is the difference between 4.1.4-ti-r9 and 4.1.5-bone15
and which one is the one recommended for future use?
Stick with 4.1.4-ti-r9, while i'm planning to push out 4.1.Y-boneX for
the life of lts, the
But i think audio (output) was still not working..
Hi Robert,
Did you get a chance to look at the audio out and whether it's working?
Kind Regards,
Shadi
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
This seems like a question that ought to be easy to answer but so far my
searching has not turned up a clear one. I need a NOP on occasion to
balance out timing on things and thus far every iteration I have tried of
NOPx results in 'instruction illegal for core version'. I'm having to do
What is running on your board exactly? When it is an Linux/Ubuntu, there is
nothing special, you can use any TCP/IP/sockets documentation for Linux
that is out there.
When you are using StarterWare bare metal code, you will find it makes use
of lwIP. There is a extensive documentation
I'm trying to update an old[is] BBB debian installation.
When I do 'apt-get update' it mostly works but I'm getting the
following errors:-
Get:6 http://repos.rcn-ee.net wheezy Release [2,169 B]
Err http://repos.rcn-ee.net wheezy Release
W: A error occurred during the signature
Robert Nelson robertcnel...@gmail.com wrote:
On Tue, Aug 11, 2015 at 3:42 PM, c...@isbd.net wrote:
Robert Nelson robertcnel...@gmail.com wrote:
On Fri, Aug 7, 2015 at 11:36 AM, c...@isbd.net wrote:
I have a BBB running Debian GNU/Linux 7, 3.8.13-bone47 kernel. I.e.
pretty standard.
On Wed, Aug 12, 2015 at 9:03 AM, c...@isbd.net wrote:
I'm trying to update an old[is] BBB debian installation.
When I do 'apt-get update' it mostly works but I'm getting the
following errors:-
Get:6 http://repos.rcn-ee.net wheezy Release [2,169 B]
Err http://repos.rcn-ee.net wheezy
On 8/12/2015 11:45 AM, k...@cranehome.info wrote:
This seems like a question that ought to be easy to answer but so far my
searching has not turned up a clear one. I need a NOP on occasion to
balance out timing on things and thus far every iteration I have tried of
NOPx results in
On Mon, Aug 10, 2015 at 08:27:05PM -0500, Felipe Balbi wrote:
On Mon, Aug 10, 2015 at 03:04:52PM -0500, Robert Nelson wrote:
On Mon, Aug 10, 2015 at 2:59 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Mon, Aug 10, 2015 at 2:55 PM, Felipe Balbi ba...@ti.com wrote:
Hi again,
On Wed, Aug 12, 2015 at 03:08:33PM -0500, Felipe Balbi wrote:
On Mon, Aug 10, 2015 at 08:27:05PM -0500, Felipe Balbi wrote:
On Mon, Aug 10, 2015 at 03:04:52PM -0500, Robert Nelson wrote:
On Mon, Aug 10, 2015 at 2:59 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Mon, Aug 10,
38 matches
Mail list logo