Re: [beagleboard] cape-universal & 4.1.x = default.. ;)

I hear where you are coming from and I think you have a valid argument here. First, I think this mailing list is the wrong forum to discuss this issue and second, I’m not sure which driver needs to be updated to implement this feature. I think from our last discussion gpiolib seemed like the

[beagleboard] Re: UART4 read in pthread not working

Hi Wally, I have tried adding fflush(stdout and fflush(stderr) in the while loop, however, in the UartRxWait thread, the read( ) function is in block waiting for incoming data. Which doesn't output anything. In the case, after start and shut down minicom, the UartRxWait thread running as

Re: [beagleboard] "No space left on device" installing Debain on a Beaglebone Black

Tried bone-debian-8.5-lxqt-2gb-armhf-2016-07-18-2gb.img.xz and it's been stuck on the Cylon Leds for over and hour with the following being the last message on the console:

Re: [beagleboard] "No space left on device" installing Debain on a Beaglebone Black

On Thu, Jul 21, 2016 at 7:21 PM, Dave Boechler wrote: > Do you have to select the console version or go to an older image. " Debian > 8.3 2016-02-11 2GB SD console " > The only others seem to be older versions. There's a 2GB lxqt image here:

[beagleboard] "No space left on device" installing Debain on a Beaglebone Black

I connected a serial console to the onboard uart because I kept getting the dreaded all flashing leds thing on a fresh install of the latest debian image. It appears the Black is running out of space on /dev/mccblk1p1 with the following error: Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1 [

Re: [beagleboard] BBGW - wlcore crashes during boot with USB audio card installed

Testing with a powered USB 2.0 hub did not change the behavior, unfortunately. I'm beginning to think my WiLink8 module might be defective, or the driver has some serious issue. Listening to an audio stream, using VLC, the radio basically died: [ 594.594514] wlcore: ERROR ELP wakeup

Re: [beagleboard] Using PRU Cape, TI's product for BBB

> On Jul 21, 2016, at 7:33 AM, Eshaan wrote: > > Thank You John. > > I just gave an order for JTAG and header pins. Be careful when installing the JTAG header because this is a fine pitch connector and difficult to solder unless you have the proper fine point

Re: [beagleboard] Resource for understanding BBB boot process with systemd

On Thu, Jul 21, 2016 at 2:52 AM, Ankur Tank wrote: > Hello Experts, > > We have BBB based custom Linux board running Linux 3.12 > > We are using SysV init, for boot, And I understand that boot happens in > following sequence, > > 1. ROM code lookks for boot device based on

[beagleboard] Debian Jessie (systemd 230 backport)

Hey Everyone, debian backports has been kindly enough to provide a systemd bump (230) from (215) via backports. I'd like to add this by default to our repo, as systemd 230 brings in some nice enhancements. Especially with regards to boottime.. v215 (x15) 17 seconds on average v230 (x15)

Re: [beagleboard] Using PRU Cape, TI's product for BBB

Thank You John. I just gave an order for JTAG and header pins. This makes quite a few things clear. 1. But when it comes to GEL files, do i need to do it for BBB in CCS v6? Because when I saw in target configuration that beaglebone black is already there and also there is AM335x separately.

Re: [beagleboard] Using PRU Cape, TI's product for BBB

Thank You John. I just gave an order for JTAG and header pins. This makes quite a few things clear. 1. But when it comes to GEL files, do i need to do it for BBB in CCS v6? Because when I saw in target configuration that beaglebone black is already there and also there is AM335x separately.

[beagleboard] Re: chipsee beaglebone lcd/dvi expansion kernel support

Hey Chris, is there any chance you have still got this image and could upload it? Youre Links expired. Im doing my head in trying to get the Chipsee Display working. I have done everything you explained earlier: Putting Ubuntu 12.04 r9 minimal on the sd card. Using linux-stable-3.2- &

[beagleboard] PWM Cape with BBB

Dear All, I am new with beaglebone and like to access PWM with PWM Cape. Do I have to set something in Linux to use the cape? Do I have to set something to use I2C? What is the Slave adress of the cape? or is it the PWM? Which I2Cbus do I have to use with the cape? Thank you so much. Best

Re: [beagleboard] rootfs installation on a Beagleboard XM

hi , i see your comment for rootfs. i did it already now , i want to copy my new gpio module as welll as .ko file to it , and again want to boot from sdcard , what will the procedure for it. Please reply asap

[beagleboard] Re: Beaglebone black is not enumerating as ttyUSB0

yes the issue was with uart cable. I don't have any debugger to see what is the problem but replacing it worked. On Tuesday, July 19, 2016 at 4:56:48 PM UTC+5:30, epcm...@gmail.com wrote: > > The circuitry for the USB to UART cable is in the USB plug of the cable, > so it should enumerate as

[beagleboard] ฺฺSession time out of BBGW

I have tried to connect my smartphone (Samsung Note3) to BBGW by wireless so I could connect only about 2 minutes. I have tried so many time but the result is the same. It always was kick by BBGW (I think). But Notebook is OK, I can connect with stable connection and It works very well. so How

[beagleboard] Resource for understanding BBB boot process with systemd

Hello Experts, We have BBB based custom Linux board running Linux 3.12 We are using SysV init, for boot, And I understand that boot happens in following sequence, 1. ROM code lookks for boot device based on boot pin configuration. 2. ROM code loads first stage boot loader(SPL/X-loader) to

Re: [beagleboard] cape-universal & 4.1.x = default.. ;)

Am Donnerstag, 21. Juli 2016 07:35:23 UTC+2 schrieb john3909: > > Why not use the A & B suffix? Surely this just needs modification to your > regular expressions? > Just renaming doesn't solve the issue. There's just one P9_42 and the features of P9_92 should get merged in to this pin. Check