[beagleboard] eMMC issues on Beagleboard X15 RevA

I first created a yocto packages using poky morty branch. At work with the DRA726 I use one based on Arago but for my Beagleboard X15 boards I would prefer something using Poky. This worked fine on both Rev A and Rev C. Since I prefer dnf to smart I wanted to use Rocko. I use the rpm packaging,

Re: [beagleboard] expansion connector spec?

Is there any eagle or kicad library for the connector used? Le 9 nov. 2016 13:47, "Gerald Coley" a écrit : > Not yet. But if there is real demand, there could be. > > Gerald > > > On Wed, Nov 9, 2016 at 11:06 AM, Catudal Michel > wrote: > >> Any CAN add

Re: [beagleboard] expansion connector spec?

Any CAN addon board? Le mercredi 14 septembre 2016 10:20:24 UTC-4, Gerald a écrit : > > This is not a BeagleBone Black, not even close. This is a whole different, > complex and powerful beast. I am working on add on boards at the moment and > should have some things out soon. Hopefully this will

Re: [beagleboard] Re: Where to purchase?

Thank you Le 7 nov. 2016 13:36, "Gerald Coley" a écrit : > It is on the latest Bill of material. > > On Nov 7, 2016 12:32 PM, "Catudal Michel" wrote: > >> What is the part number for the header for the fan on the board? My Rev 2 >> of the board doe

Re: [beagleboard] Re: Where to purchase?

What is the part number for the header for the fan on the board? My Rev 2 of the board doesn't have it. Le vendredi 23 septembre 2016 09:55:37 UTC-4, Gerald a écrit : > > Can you send me some pictures? Which inductors were rusty? > > Gerald > > On Fri, Sep 23, 2016 at 8:51 AM, > wrote: > >> Two w

[beagleboard] Funtoo on Beagleboard X15

I have created a funtoo for the Beagleboard X15. I can boot it and will be adding to it. The basic without xorg with full internet support boots in about 3.4 seconds. I use the u-boot and Linux kernel from the latest TI SDK release. I use it on a Rev A2 board but it will also work on a Rev B1 bo

Re: [beagleboard] Problem booting on Beagleboard X15 Rev B1

Le jeudi 20 octobre 2016 14:28:28 UTC-4, RobertCNelson a écrit : > > On Thu, Oct 20, 2016 at 1:19 PM, Catudal Michel > wrote: > > > > > > I got two of the Beagleboard X15 Rev B1 and have not been able to boot > the > > MicroSD TI Linux (generated by yoc

Re: [beagleboard] x15....where is it?

Le samedi 20 août 2016 14:54:21 UTC-4, Christopher Hansen a écrit : > > I pinged RS and they do ship to US. Here's what they told me: > > Thank you very much for your recent request. > > > > Shipping and documentation charges will also be applied depending on the > amount ordered. > > > > R

[beagleboard] Problem booting on Beagleboard X15 Rev B1

I got two of the Beagleboard X15 Rev B1 and have not been able to boot the MicroSD TI Linux (generated by yocto) on it. The previous release with kernel 4.1 boots OK except that it is set in a low resolution, not the 1920x1080 expected resolution. I tried the same image on three rev A3 from T

[beagleboard] Information on Chipsee 4.3 Inch board

I am looking for some information and software support for the Chipsee 4.3 Inch board.3.14.55 All I found so far is a debian image which is no use to me since my system is Gentoo. The documentation is only how to use the debian system and schematic. It would have been nice to have to datasheet