Hi guys,
Followed Tom and Gerald's suggestions, I tried it again by 800F with the
lead-free solder. This time everything go well just like the tutorials and
it works now!
Many thanks to all of you!
- Claud
On Tuesday, March 24, 2015 at 7:27:37 AM UTC-7, Gerald wrote:
>
> Lead free. High temp
Hi Harvery,
700 dgree can melt lead-free solder *directly* very well -- that's how I
adhere a layer of solder to connector pins. Then I put connector on top of
P2 on the board and heat the pins for making the solder melt and connect
joint just like the video. But the solder between pins and P2
Thank you Tom and Harvey! I'll try again with higher temperature (800 or
even more higher till it melts) as well as adopt Harvey's suggestions.
Result will be reported in this thread.
I used lead-free .022 in 700 degree. Temperature is one of a few factors I
haven't adjusted in those attempts
Hi,
I tried to solder ARM20cTI20 JTAG connectors with Element14’s BBB but failed,
twice (hence two boards broken). After some investigations, I think it’s not my
fault but is manufacturer’s problem. Element14’s version and CircuitCo’s
version are really different in this issue.
As you may kno