What are you trying to do? To use CCS in bare board mode, you need an SDCard
that sets up the board to work with CCS. From what I recall, you need more than
just the DDR3 GEL file to get BBB working.
Regards,
John
> On Sep 19, 2017, at 1:45 PM, tlsmith3...@gmail.com wrote:
>
> Running
Running into an issue where we were able to see console output on the
serial console when no JTAG or CCS was connected. After connecting CCS to
JTAG and updating the DDR3 gel file we were able to see the output over the
CCS serial console. After disconnecting the JTAG and CCS and doing a