A small update on this matter:
I tried booting with different images, specially with one that in the past
probed to do the job (refer to this thread
https://groups.google.com/forum/#!searchin/beagleboard/Incorrect$20magic$20number$20in$20EEPROM/beagleboard/Q65z5O4haYc/jnWWXsHz0CkJ
):
On Wednesday, July 2, 2014, Víctor MV v.mayor...@gmail.com wrote:
A small update on this matter:
I tried booting with different images, specially with one that in the past
probed to do the job (refer to this thread
Jason,
This is a new board developed to support BeaglePilot
https://github.com/BeaglePilot (a simplification of what i've been doing
with Erle http://erlerobot.com) thereby i need to flash the EEPROM myself.
After removing some components that were creating conflicts with SYS_BOOT
pins the
On Tue, Jul 1, 2014 at 11:49 AM, Víctor MV v.mayor...@gmail.com wrote:
Jason
I'm searching for one of the old BB images that allowed to write the EEPROM
from u-boot. One of those that you could use to access the u-boot even if
the EEPROM was empty.
You don't have to go old for that. Robert
On Tue, Jul 1, 2014 at 11:51 AM, Jason Kridner jkrid...@gmail.com wrote:
On Tue, Jul 1, 2014 at 11:49 AM, Víctor MV v.mayor...@gmail.com wrote:
Jason
I'm searching for one of the old BB images that allowed to write the EEPROM
from u-boot. One of those that you could use to access the u-boot
Robert,
Thanks for pointing it out. I flashed the image and put the TP2 to GND
(using the BeagleBone white).
Tried it and got an infinite loop with the following:
*U-Boot SPL 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29)*
*Incorrect magic number (0x) in EEPROM*
*Could not get board
On Tue, Jul 1, 2014 at 12:47 PM, Víctor MV v.mayor...@gmail.com wrote:
Robert,
Thanks for pointing it out. I flashed the image and put the TP2 to GND
(using the BeagleBone white).
Doh! You have a white, don't use that file.. It assumes a bbb which
include 1Ghz + ldo rails!!!
Regards,
--
Mmm too late but the board doesn't seem to be damaged. Any ideas on how to
flash EEPROM on the BB?
2014-07-01 19:48 GMT+02:00 Robert Nelson robertcnel...@gmail.com:
On Tue, Jul 1, 2014 at 12:47 PM, Víctor MV v.mayor...@gmail.com wrote:
Robert,
Thanks for pointing it out. I flashed the
On Tue, Jul 1, 2014 at 12:51 PM, Víctor MV v.mayor...@gmail.com wrote:
Mmm too late but the board doesn't seem to be damaged. Any ideas on how to
flash EEPROM on the BB?
it should be 'fine' just don't let it sit for a hours...
If you can boot to userspace... This is how i flash the eeprom on
This is all fine, but it should be clear what is going on to someone
visiting http://beagleboard.org/source. Perhaps I just missed it.
I see a bunch of patches here:
https://github.com/eewiki/u-boot-patches/blob/master/v2014.07-rc3/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch
(per
10 matches
Mail list logo
