Hi,
Yea.. I had removed that '#' sign..
It was not working yet.
On Saturday, 10 March 2018 20:20:17 UTC+5:30, Wulf Man wrote:
>
> The "#" sign must be removed or it will not load
> not sure if you did that :)
>
> On 3/9/2018 8:15 PM, salah...@gmail.com wrote:
>
> Hi Wulf Man,
>
> I've added
On 11/03/18 00:49, evilwulfie wrote:
> The "#" sign must be removed or it will not load
> not sure if you did that :)
>
> On 3/9/2018 8:15 PM, salahgaf...@gmail.com wrote:
>> Hi Wulf Man,
>>
>> I've added the related dtbo files in /lib/firmware/ and the links I've
>> kept in the /boot/uEnv.txt as
The "#" sign must be removed or it will not load
not sure if you did that :)
On 3/9/2018 8:15 PM, salahgaf...@gmail.com wrote:
> Hi Wulf Man,
>
> I've added the related dtbo files in /lib/firmware/ and the links I've
> kept in the /boot/uEnv.txt as follows:
>
> ###Overide capes with eeprom
>
Hi Wulf Man,
I've added the related dtbo files in /lib/firmware/ and the links I've kept
in the /boot/uEnv.txt as follows:
###Overide capes with eeprom
#uboot_overlay_addr0=/lib/firmware/.dtbo
#uboot_overlay_addr1=/lib/firmware/.dtbo
But, it didn't help!! :(
On Tuesday, 27 February 2018
write a device overlay to do all of this then load it in /boot/uEnv.txt
On 2/26/2018 8:33 PM, salahgaf...@gmail.com wrote:
> Thanks @Robert
>
> I could solve the issue by setting active_low value in
> /sys/class/gpio/gpio66
>
> But I think that's not the recommended method.
>
> Comments please!!
Thanks @Robert
I could solve the issue by setting active_low value in
/sys/class/gpio/gpio66
But I think that's not the recommended method.
Comments please!!
On Friday, 23 February 2018 18:06:48 UTC+5:30, Salah Abdul Gafoor wrote:
>
> Hi,
>
> I want to configure some of my gpio pins (P8_07 to
