Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

On Thu, May 18, 2017 at 5:06 PM Niels Jakob Buch wrote: > Argh, waiting on a pile of JST-XX connectors to get the Blue-world up and > running. But thanks! > I happen to really like the

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

I have the same problem. I ordered two of those but both of them have I/O error. This happens with the eMMC and the SD card as well. dmesg shows memory block errors. Is it the hardware? Did I get 2 out of those 10 faulty ones? On Thursday, 8 March 2018 17:46:53 UTC-8, megl...@gmail.com wrote:

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

I have tried: - 4 distinct power supplies (3 x 5V, 1x 12V) - SD card and built in memory - 3 different OS images -- latest 'iot' image from https://beagleboard.org/latest-images -- image referenced in BeagleBoneBlue FAQ,

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

Same problems on new Beagle Bone Blue. Unpacked, powered up, worked like 5 minutes until IO errors. Kind regards, Bm On Wednesday, August 23, 2017 at 11:49:22 PM UTC+2, Jeffrey Obadal wrote: > > I don't have my logs with me, but I believe mine looked pretty much just > like that. Unfortunately

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

I don't have my logs with me, but I believe mine looked pretty much just like that. Unfortunately both of mine spits out errors just trying to update Debian. Using an SD Card delays the error a little longer, but eventually it gets some disk access errors and goes into read only mode. I wonder if

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

I also am having the same issue. I thought it was broken hardware so I bought a new one and the same thing happened again. I found that I can usually induce the errors by transferring a large amount of files using scp. I'm going to check UART0 for additional information once I get the cabling

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

I just checked and the JST-SH connector pins, inside the terminal are only 1mm apart. https://is.alicdn.com/img/pb/863/022/524/524022863_862.jpg I guess I will wait for the wire assemblies. On Friday, 19 May 2017 00:06:02 UTC+2, William Hermans wrote: > > > > On Thu, May 18, 2017 at 2:06 PM,

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

On Thu, May 18, 2017 at 2:06 PM, Niels Jakob Buch wrote: > Argh, waiting on a pile of JST-XX connectors to get the Blue-world up and > running. But thanks! > So, I actually have no idea of the pin pitch on those JST headers. But the serial debug cable I bought years ago, and

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

Argh, waiting on a pile of JST-XX connectors to get the Blue-world up and running. But thanks! On Thursday, 18 May 2017 22:21:46 UTC+2, William Hermans wrote: > > UART0 looks to be tied to a 4pin JST-SH connector. How exactly that works > out, you'll have to tell me. I do not own a beaglebone

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

UART0 looks to be tied to a 4pin JST-SH connector. How exactly that works out, you'll have to tell me. I do not own a beaglebone blue. Software wise though, it should be exactly the same. On Thu, May 18, 2017 at 6:01 AM, Niels Jakob Buch wrote: > Will try that if attaching

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

Will try that if attaching the cable does not work Now comes the noob question: How do I attach the cable, seems that there is plenty BeagleBone Black tutorials on that, but not sure how to do it on the blue one. On Wednesday, 17 May 2017 23:49:32 UTC+2, William Hermans wrote: > > A couple

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

On Wed, May 17, 2017 at 2:12 PM, Niels Jakob Buch wrote: > That makes sense, will try that. > > But are there no log-file where this kernel output is stored? > Well it could be, but I do not think Robert persists logs between reboots. Maybe I'm wrong. So then assuming if what

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

That makes sense, will try that. But are there no log-file where this kernel output is stored? On Wednesday, 17 May 2017 22:48:24 UTC+2, William Hermans wrote: > > Get, and connect a serial debug cable. Connect to your support PC, use > puTTY or another serial client software to view the kernel

Re: [beagleboard] Weird behaviour: input/output error and no commands after few minutes

Get, and connect a serial debug cable. Connect to your support PC, use puTTY or another serial client software to view the kernel output as it's running, and what errors are being displayed, when this happens. On Wed, May 17, 2017 at 1:25 PM, Niels Jakob Buch wrote: > > Hi

[beagleboard] Weird behaviour: input/output error and no commands after few minutes

Hi there, new to Beaglebone Blue but not happy so far. Using newest image bone-debian-8.7-iot-armhf-2017-03-19-4gb Flashing to MMC, working fine. Configuring wifi to my local AP in /etc/network/interfaces Running apt-get update, apt-get upgrade without problems. Rebooting from that, all is ok,