Set your Calenders.. ;)
Deabian-8 release party in Mumbai, India
Date : 26th April, 2015, Sunday
Location : DirectiPlex, Andheri East
http://www.meetup.com/Mumbai-Technology-Meetup/events/221813556/
-- Forwarded message --
From: Niels Thykier ni...@thykier.net
Date: Tue,
On a good phy boot I see the following:
[2.810749] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[2.817206] davinci_mdio 4a101000.mdio: detected phy mask fffe
[2.833517] libphy: 4a101000.mdio: probed
[2.837871] davinci_mdio 4a101000.mdio: phy[0]: device
On Fri, Apr 24, 2015 at 12:35 PM, Rick Mann rm...@latencyzero.com wrote:
On Apr 24, 2015, at 10:08 , Robert Nelson robertcnel...@gmail.com wrote:
Really!!! it's not in v4.0? Oh my what are we going to do!
Talk about your FAQ...
Sadly, I think this will persist so long as 99% of all
BeagleBone Black SRM Version C.1
Section 6.7 Boot Configuration Design, Page 67.
See Page 68, Figure 38.
Yes, DNI means Do Not Insert.
Or some time the term NP , meaning No Pop or do not populate is used.
Section 6.8 Default Boot Options, Page 68.
It is covered again on page 106, Section
Hi, I've been trying to do the same thing.
In my case, I connected the BBB to the LAN network, and I can see the video
on my BBB browser typing 192..:port (IP camera adress).
Another thing or problem is my Ip axis camera P1344 is PoE, I tried to
connect it with a switch PoE, directly to
You can also fix most strapping options, including the PHY address, by
writing to mdio register 0x12 (see datasheet
http://ww1.microchip.com/downloads/en/DeviceDoc/8710a.pdf page 60).
This whole issue still sounds really weird though. The RXD3/PHYAD2 line has
internal pull-down in the PHY,
http://www.mediatek.com/en/downloads/mt7601u-usb/
在2015年年2月9日星期一UTC + 8下午5：18：01，大卫王写道：
我的主板是beaglebone黑色REV C 在2015年年2月9日星期一UTC + 8下午5：14：28，大卫王写道：
我用腾讯的USB无线（MT7601），然后按照安装驱动程序的说明：
命令和apt-get安装的git
混帐克隆https://github.com/porjo/ mt7601.git
https://github.com/porjo/mt7601.git
CD
On my *Rev C* BBB
I am running presently 3.8.13-bone71.1 kernel version on my beagle bone
black.
I want to make hub start but is error.
https://lh3.googleusercontent.com/-mkzKOeO3Xq4/VTsHY8f7TLI/ABI/TfP0DPxGi3Q/s1600/22.png
But On my *Rev B* BBB 3.8.13-bone71.1 kernel version
my hub
Hi Jay,
I've run into the same problem, so thank you much for your work. However it
seems more natural to me to patch the cpsw driver to use the first MAC
which is found rather than modifying the DT at runtime. Please see my
suggestion (based on 3.12.30):
diff -Naur
Dear Robert
my kernel is v4.0, i have the same problem. can not
find the bone_capemgr* file. i used your way, but when i reboot bbb, it
stoped at Stopping System V runlevel compatibility [ok] .
what can i do ?
--
For more options, visit
Problem in short:
*eMMC partition's device files are not visible in /dev/ directory after
partitiong using sfdisk*
HI ,
I have put log of script here, any suggestions,
+ partition_emmc /dev/mmcblk0
+ DRIVE=/dev/mmcblk0
+ HEADS=255
+ SECTOR_SIZE=512
+ SECTORS_PER_TRACK=63
*+ dd if=/dev/zero
On Fri, Apr 24, 2015 at 11:22 AM, Ankur Tank artf...@gmail.com wrote:
Problem in short:
eMMC partition's device files are not visible in /dev/ directory after
partitiong using sfdisk
HI ,
I have put log of script here, any suggestions,
+ partition_emmc /dev/mmcblk0
+ DRIVE=/dev/mmcblk0
+
Feel free to provide any wording that makes this understandable to all and
I will consider adding it in.
Gerald
On Fri, Apr 24, 2015 at 2:49 PM, Bit Pusher ken.w.mar...@gmail.com wrote:
The discussion are about the affect of holding the boot pin down, not how
the various SYS_BOOT signals
I've got a BBB that I'm using with a battery attached to allow cleanly
shutting it down. I'm running it currently on the 3/15/15 release of
Debian.
If I run it with the default device tree (am335x_boneblack.dtb) then when
5v is removed it shuts down properly. If I use a dtb that doesn't have
14 matches
Mail list logo
