Re: [beagleboard] BBBW wlan0 testing

On Sat, Feb 18, 2017 at 9:06 PM, Kevin Gordon wrote: > I have been trying to resolve what causes a successful setup of connman to > fail in Beaglebone Black Wireless. These are the steps: > (1) Make a SDcard using bone-debian-8.7-lxqt-4gb-armhf-2017-02-12-4gb >

[beagleboard] Re: BBBW wlan0 testing

Extra item (9) #shutdown no longer is successful. BBBW immediately self reboots.. On Sunday, 19 February 2017 16:06:16 UTC+13, Kevin Gordon wrote: > > I have been trying to resolve what causes a successful setup of connman to > fail in Beaglebone Black Wireless. These are the steps: > (1)

[beagleboard] BBBW wlan0 testing

I have been trying to resolve what causes a successful setup of connman to fail in Beaglebone Black Wireless. These are the steps: (1) Make a SDcard using bone-debian-8.7-lxqt-4gb-armhf-2017-02-12-4gb (successful) (2) Use connmamctl to setup wlan0 (successful) (3) #apt-get update #apt-get

[beagleboard] BBBW connman problems

Hello, Apologies if this is a silly question. I am new to both the beagle bone and debian. I have successfully booted my BBBW using a few different images from https://rcn-ee.com/rootfs/bb.org/testing. Everything goes well including the initial wifi setup using connman. However, after I

[beagleboard] Re: BeagleBone Green Board Cannot Connect to Internet

Got the same problem here before note that Softap0 take the same ip than my modem use. fixing that make the wifi connection stable and running fine. But from that , no way to got BBG working as an Hotspot. wifidog seem blocking the access. if you have any clues Robert , you're welcome -- For

Re: [beagleboard] xrandr Can't open display

On Fri, Feb 17, 2017 at 6:45 AM, sajeevan k wrote: > Now I am able to open a window as per a small qt progam in the LCD display. > > But still xrandr is not showing the outputs. It is showing no protocol > specified. How are you running your qt program? Run xrandr in

Re: [beagleboard] BBBW Wireless Setup

On Fri, Feb 17, 2017 at 2:14 PM, wrote: > > Hi, > > > i don't detect the wifi componant WL1835MOD correctly > > i see eth0 not normal on this board, i should see wlan0 > > i watched a lot of tutorials, i didn't see this kind of problem. > > I tried 2 systems images :

Re: [beagleboard] Make BBG work as an Hotspot

On Sat, Feb 18, 2017 at 2:26 PM, wrote: > hi all , > > i actually trying to make this board working like an Hotspot ( AP with > internet forwarding ) > SoftAP set me crazy ... > Try all i can to have internet , but connected devices still answer : ' > connected , no

[beagleboard] Make BBG work as an Hotspot

hi all , i actually trying to make this board working like an Hotspot ( AP with internet forwarding ) SoftAP set me crazy ... Try all i can to have internet , but connected devices still answer : ' connected , no internet connection' clear all iptables , set iptables working for an other

Re: [beagleboard] Re: using desktop window for BBB console

On Fri, 2/17/17, William Hermans wrote: Subject: Re: [beagleboard] Re: using desktop window for BBB console To: beagleboard@googlegroups.com Date: Friday, February 17, 2017, 8:10 PM Just to be clear, I rarely recommend

[beagleboard] BBBW Wireless Setup

Hi,

[beagleboard] Re: Help reading MLX90614 with Beaglebone Black

I switched to a arduino Uno and problem persisted. Then discovered I had read the data sheet wrong. The schematic of the pins is looking from the bottom up while I had connected as if the schematic was looking at the top downwards. Once I connected it correctly, it worked on arduino, raspberry

[beagleboard] BBGW how is the initial WIFI setup with AP + client in parallel made?

Hi folks, I would very appreciate if somebody could explain little quick how to setup a AP capable WIFI device like implemented on the BBGW to become an AP and at the same time is able to connect to an existing other WIFI network with an obviously different network address. is this a hostapd

[beagleboard] Re: UAV Drone out of a BBBW

Check it. Here's my drone now. The original design was a bit bulkey and the motors were smaller than I thought. Made out of bassword with 1/2" dowel so light as

Re: [beagleboard] Re: Microchip mcp2515, can over spi, not working. Wrong device tree overlay?

On Sat, 2/18/17, robertsmaria934 via BeagleBoard wrote: Subject: Re: [beagleboard] Re: Microchip mcp2515, can over spi, not working. Wrong device tree overlay? To: beagleboard@googlegroups.com Date: Saturday,

Re: [beagleboard] Re: Microchip mcp2515, can over spi, not working. Wrong device tree overlay?

On Sat, 2/18/17, Mark K Cowan wrote: Subject: Re: [beagleboard] Re: Microchip mcp2515, can over spi, not working. Wrong device tree overlay? To: "BeagleBoard" Date: Saturday, February 18, 2017,

Re: [beagleboard] Re: Microchip mcp2515, can over spi, not working. Wrong device tree overlay?

I solved it with my own devicetree overlay, loaded after the BB-SPIDEV0 overlay. It's available at https://github.com/battlesnake/beaglebone-spi0-mcp2515 On Saturday, 18 February 2017 14:22:19 UTC, Laurits Telle Riple wrote: > > Hi! > > I got it to work, but not using the mainline driver. I

Re: [beagleboard] Re: Microchip mcp2515, can over spi, not working. Wrong device tree overlay?

Hi! I got it to work, but not using the mainline driver. I bought a cape from towertech to be sure that my hardware was correct. They shipped the device with some modified version of the driver. Got some help in the beagle irc chat to try to find the origin of that driver. IIRC the driver was