[beagleboard] Re: How to get A gui on my beagle bone

Hi RobertCNelson , I was using debain 9.2 and 9.3 Iot image on Begale Bone Black wireless board connected to 7 in Lcd. On Lcd Command line is working . I want to make it Desktop GUI. I tried your script but unable to make it Desktop GUI on the board (

Re: [beagleboard] How to disable RNDIS gadget and configure USB as a serial interface?

On Wed, Mar 7, 2018 at 4:32 PM, Vinicius wrote: > I disabled the network configuration for usb0, reboot it, but no ttyACM0 > device in /dev on BBB, nor in host computer (also Linux Debian)... > > perhaps some script ? Well, 'today' the ACM device is created thru

Re: [beagleboard] How to disable RNDIS gadget and configure USB as a serial interface?

I disabled the network configuration for usb0, reboot it, but no ttyACM0 device in /dev on BBB, nor in host computer (also Linux Debian)... perhaps some script ? Regards, Vinicius Em 07/03/2018 17:27, Robert Nelson escreveu: On Wed, Mar 7, 2018 at 2:09 PM, Vinicius

Re: [beagleboard] I2S interface on BBB

On 07/03/18 21:52, h...@olli-ai.com wrote: > I'm try to use TVL320AIC3254 Codec with Beaglebone Black via I2S bus. At > present, I can play music but it hear noise. Attached is script to set > up this codec with these setting: WCLK=44.1Khz, BCLK=1.4112 Mhz, MCLK=24 > Mhz. It's been a long time

Re: [beagleboard] How to disable RNDIS gadget and configure USB as a serial interface?

On Wed, Mar 7, 2018 at 2:09 PM, Vinicius wrote: > BeagleBoneBlack, with debian 8.5 and Linux 4.4.12-ti-rt-r32 > > I want to disable the RNDIS gadget from usb0 and configure it as a serial > port (like ttyACM or ttyUSB) > > How I can do this? /dev/ttyACM0 is enabled by

[beagleboard] How to disable RNDIS gadget and configure USB as a serial interface?

BeagleBoneBlack, with debian 8.5 and Linux 4.4.12-ti-rt-r32 I want to disable the RNDIS gadget from usb0 and configure it as a serial port (like ttyACM or ttyUSB) How I can do this? Many thanks, Vinicius -- For more options, visit http://beagleboard.org/discuss --- You received this

Re: [beagleboard] Re: Custom Board doesnt run with Angström Image

Am Mittwoch, 7. März 2018 17:10:23 UTC+1 schrieb RobertCNelson: > > > Thank you for your fast reply. > > I didnt remove anything. I only download this image: > > "I also try to run a custom board similar to the BBB. I only removed > the HDMI part and use a MT41K256M16TW-107 ITP DDR3. When I

Re: [beagleboard] Re: Custom Board doesnt run with Angström Image

> Thank you for your fast reply. > I didnt remove anything. I only download this image: "I also try to run a custom board similar to the BBB. I only removed the HDMI part and use a MT41K256M16TW-107 ITP DDR3. When I try to boot, it stops while running the kernel:" YOU removed the HDMI.. >

Re: [beagleboard] Re: Custom Board doesnt run with Angström Image

Do yourself a favor dont use Angstrom It has no support development has stopped Use debian. We have Excellent support here when using a modern OS On 3/7/2018 8:59 AM, 'El Smiedro' via BeagleBoard wrote: > > > Am Mittwoch, 7. März 2018 15:43:09 UTC+1 schrieb Jeff Andich: > > I just did a 10

[beagleboard] Re: Custom Board doesnt run with Angström Image

Am Mittwoch, 7. März 2018 15:43:09 UTC+1 schrieb Jeff Andich: > > I just did a 10 second google and it appears like tda998x is related to > HDMI which you pulled from your board. > > Just a couple of basic questions: > > 1) Did you remove the HDMI from either/both the u-boot pinmux and/or the

Re: [beagleboard] Weirdness with new beaglebone black boards

On Wed, Mar 7, 2018 at 9:10 AM, evilwulfie wrote: > Once tested these bones will need to have a custom image flashed. > > I dont have this image so i cannot flash the bone. > I can flash a new image if i need to. > > I want to make sure that the board can be flashed and work

Re: [beagleboard] Weirdness with new beaglebone black boards

Once tested these bones will need to have a custom image flashed. I dont have this image so i cannot flash the bone. I can flash a new image if i need to. I want to make sure that the board can be flashed and work from the EMMC once i send them off to never never land of customers. On 3/7/2018

Re: [beagleboard] Weirdness with new beaglebone black boards

On Wed, Mar 7, 2018 at 9:00 AM, evilwulfie wrote: > how would one go about doing that from command line > > will this affect booting from EMMC yeap. but that's not the issue you are facing... > I just googled how to clear out EMMC and did not see anything related to >

Re: [beagleboard] Weirdness with new beaglebone black boards

how would one go about doing that from command line will this affect booting from EMMC I just googled how to clear out EMMC and did not see anything related to that BTW Welcome back Robert On 3/7/2018 7:57 AM, Robert Nelson wrote: > On Wed, Mar 7, 2018 at 8:52 AM, evilwulfie

Re: [beagleboard] Weirdness with new beaglebone black boards

On Wed, Mar 7, 2018 at 8:52 AM, evilwulfie wrote: > uboot too old ? on new board ? Well both boards. ;) Just clear them out, and they'll operate exactly the same.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss

Re: [beagleboard] Weirdness with new beaglebone black boards

uboot too old ? on new board ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [beagleboard] Weirdness with new beaglebone black boards

On Wed, Mar 7, 2018 at 8:48 AM, evilwulfie wrote: > On 3/7/2018 7:38 AM, Robert Nelson wrote: >> sudo /opt/scripts/tools/version.sh > > New BBB > > root@beaglebone:/home/debian# sudo /opt/scripts/tools/version.sh > git:/opt/scripts/:[ea6ea9fca05f36f5044398884375b0231348d6e2]

Re: [beagleboard] Weirdness with new beaglebone black boards

On 3/7/2018 7:38 AM, Robert Nelson wrote: > sudo /opt/scripts/tools/version.sh New BBB root@beaglebone:/home/debian# sudo /opt/scripts/tools/version.sh git:/opt/scripts/:[ea6ea9fca05f36f5044398884375b0231348d6e2] eeprom:[A335BNLT00C02017BBBK136F] model:[TI_AM335x_BeagleBone_Black]

[beagleboard] Re: Custom Board doesnt run with Angström Image

I just did a 10 second google and it appears like tda998x is related to HDMI which you pulled from your board. Just a couple of basic questions: 1) Did you remove the HDMI from either/both the u-boot pinmux and/or the cape manager? 2) If you start with a console image, does this yield the

Re: [beagleboard] Weirdness with new beaglebone black boards

On Wed, Mar 7, 2018 at 8:36 AM, evilwulfie wrote: > I got a shipment of beaglebone blacks in this week. They will boot on > the provided kernel 4.1 > i have not tested anything more with that kernel. > > I have a SD card with some custom tests for specific hardware that runs

Re: [beagleboard] Beaglebone black wireless is not starting

board is toast. just buy a new one On 3/6/2018 9:40 PM, ritvikjoshi...@gmail.com wrote: > My beaglebone is not starting/ responding the power on led is not > blinking...is there anything i could do to start the boardbut before that > let me explain what happened...i was using beaglebone

[beagleboard] Weirdness with new beaglebone black boards

I got a shipment of beaglebone blacks in this week. They will boot on the provided kernel 4.1 i have not tested anything more with that kernel. I have a SD card with some custom tests for specific hardware that runs with a beaglebone black it runs the 4.14 kernel and works fine on an older

[beagleboard] I2S interface on BBB

Hi all, I'm try to use TVL320AIC3254 Codec with Beaglebone Black via I2S bus. At present, I can play music but it hear noise. Attached is script to set up this codec with these setting: WCLK=44.1Khz, BCLK=1.4112 Mhz, MCLK=24 Mhz. I have some questions: 1, Below is my hw_params. I want to set

[beagleboard] Beaglebone black wireless is not starting

My beaglebone is not starting/ responding the power on led is not blinking...is there anything i could do to start the boardbut before that let me explain what happened...i was using beaglebone black wireless for driving two 12v l298n Motor drivers all the circuit was working and the 12v

[beagleboard] McASP Configuration

Hi all, I'm try to use TLV320AIC3254 Audio Codec with Beaglebone Black. I face some issues when I set the BCLK frequences. Below is hw_params: static int tlv320aic32x4_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) {

[beagleboard] Re: Micro sd card in BBB

Go to: http://beagleboard.org/latest-images Read the paragraph that starts with the words: "To turn these images into eMMC flasher images" ... --- Graham == On Wednesday, March 7, 2018 at 1:08:03 AM UTC-6, rakesh@iiitdmj.ac.in wrote: > > Hello, > > I am a newbie to Beaglebone black.

[beagleboard] Custom Board doesnt run with Angström Image

Hello community, I use the Angström Image v2012.12 - Kernel 3.8.13 with U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14) and I can login on my BBB. I also try to run a custom board similar to the BBB. I only removed the HDMI part and use a MT41K256M16TW-107 ITP DDR3. When I try to boot, it