This is the same board I have posted about before.
The board is closer to a PocketBeagle than a BBB
But it has eMMC matching the BBB as well as a 4.3 LCD.
After dealing with a number of board issues,
I can boot an SDcard image of
bone-debian-9.6-console-armhf-2018-12-10-2gb.img
with uEnv.txt
On 2/2/2019 11:38 AM, sam.abb...@gmail.com wrote:
> Hi,
>
> I have a beaglebone with which I am having trouble getting an HDMI output
> on a 50 inch tv. I am getting HDMI output on 32 inch TV but not on a 50
> inch. It just says resolution not supported.
> I have tried forcing different
Hi,
I have a beaglebone with which I am having trouble getting an HDMI output
on a 50 inch tv. I am getting HDMI output on 32 inch TV but not on a 50
inch. It just says resolution not supported.
I have tried forcing different resolutions through uEnv.txt but that did
not work.
What changes
IIRC, the pocketbeagle can see current spikes over 200 mA from the battery
while it is booting, although it takes less power after it is booted and
idling. Probably one of two things is happening. The battery voltage
droops and either its own protection circuitry cuts off the power or the
Hi,
Here are two charged LiPo batteries. When connecting 860 mAh, the
PocketBeagle can start normally. If it is 280 mAh, press
POWER_MINI_PUSHBUTTON and power down after 4 user LEDs light up in around 5
seconds. Even with a 280 mAh battery, once it is started with the help of
the power
