@Ken Yep, I already did add the default gateway and the response I get is
"already exists" .
@Robert, yep I un-commented that part.
*root@sp3:~# grep forward /etc/sysctl.conf
# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1
# Uncomment the next line to enable
At Thu, 14 May 2020 19:19:47 -0700 (PDT) beagleboard@googlegroups.com wrote:
>
>
>
> I reinstalled the latest debian on BBB.
> I was able to install *arptables ebtables on my host side.*Everything went
> well .
> But still I am not able to ping 8.8.8.8 or any DNS name for that matter.
>
>
Hi Karishma,
Since Jason and Robert helped me out so much there shouldn't be too much to
do.
Beagle bone green and pocket beagle use the same debian version.
So I'd assume you just have to load the latest version and then edit the
uEnv.txt like I
did.
Looks to me that all you need is;
sudo route add default gw 192.168.7.1
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails
I reinstalled the latest debian on BBB.
I was able to install *arptables ebtables on my host side.*Everything went
well .
But still I am not able to ping 8.8.8.8 or any DNS name for that matter.
*And still get the same output :*
*PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
Hello,
I am struggling with something probably really obvious. I am 6 weeks in
from being a noob, and are
I decided to wipe my emmc and put a set of boot and root files on. So
from u-boot i did a pair of mmc erase's to get both partitions on the emmc.
After that I have had chaos. My
This works!
DRA7XX_CORE_IOPAD( 0x34F0, PIN_INPUT | MUX_MODE14 ) // P9.21a
DRA7XX_CORE_IOPAD( 0x37C4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1 ) //
P9.21b
DRA7XX_CORE_IOPAD( 0x369C, PIN_INPUT | MUX_MODE14 ) // P9.22a
DRA7XX_CORE_IOPAD( 0x37C0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1 ) //
P9.22b
Adding this to my device tree overlay seemed to make /dev/ttyO2 show up:
{
status = "okay";
};
I am not able to receive data, though, only send. Any ideas?
On Thursday, May 14, 2020 at 9:22:07 AM UTC-6, John Allwine wrote:
>
> I'm trying to set up UART3 on the Beaglebone AI to work as a
Hi,
its fine - nailed it !
Index: git/board/ti/am335x/board.h
===
--- git.orig/board/ti/am335x/board.h
+++ git/board/ti/am335x/board.h
@@ -30,7 +30,10 @@ static inline int board_is_bone(void)
static inline int
I'm trying to set up UART3 on the Beaglebone AI to work as a serial port,
but I'm not sure what is involved. I configured P9.21b and P9.22b to be in
mode 1, which is mapped to uart3_tx and uart3_rx. How do I get those pins
bound to a tty device under /dev? Maybe they already are and I don't
Hi
I am trying the same thing with Beagle bone green board.
Can u help me in this as you mentioned that it worked for you.
Thanks
Karishma
On Thursday, February 22, 2018 at 6:11:02 PM UTC+5:30, jackfh...@gmail.com
wrote:
>
> I've gotten the sd card overlay working, thank you for the help! Now
Hi,
I have made a custom Beaglebone black board to go in a medical product I am
designing. Its been silly-fiddly to get this up and running. 1) the SD
card socket I sourced has the card-in switch inverted. This bit was easy
to fix. 2) The EEPROM is blank and I understand I forgot to
Hi Phil,
On Wednesday, 13 May 2020 16:33:40 UTC+3, robotsrule...@gmail.com wrote:
>
> Any suggestions???
>
If it's running off the internal eMMC, it should be quite reliable.
The most obvious advice is to look at the system logs after the problem has
occurred and try to find hints of what has
13 matches
Mail list logo
