[beagleboard] Updating bootloader for emmc flasher and changing USB device name

2018-11-07 Thread ferdster
Hello, I've updated the bootloader with: sudo /opt/scripts/tools/developers/update_bootloader.sh But when I run /opt/scripts/tools/eMMC/beaglebone-black-make-microSD-flasher-from-eMMC.sh it looks like it pulls an older backup version from /opt/backup/uboot I see that when I run the update

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-22 Thread ferdster
Everything seems to work like it should. Thanks again! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-22 Thread ferdster
Eagerly waiting to test out 4.16-rc2-bone5. Can you post here when it's out? I've been running the update_kernel.sh script every 30 minutes, but it still says the latest version is bone4. BTW, I really appreciate all the help you have provided! Thanks. -- For more options, visit

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-21 Thread ferdster
> > sudo apt update ; sudo apt upgrade > > there's an upgraded bb-cape-overlay package > After digging out a USB-to-Ethernet dongle for internet access, I did the upgrade and those pins now work. Thanks. -- For more options, visit http://beagleboard.org/discuss --- You received this

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-21 Thread ferdster
> > Only gpio's are implemented > Could you clarify that because the following don't work either: config-pin P9_14 gpio config-pin P9_42 gpio Thanks. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-21 Thread ferdster
Yes, that seems to work to add the PCF8523 RTC, but there are some other issues. -no more wifi (SoftAp0 or wlan0). 'ifconfig -a' only shows lo, usb0, and usb1. -'config-pin' still does not work. For example: config-pin P9_24 uart config-pin P9_26 uart Thanks. -- For more options,

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-21 Thread ferdster
I am using 'Debian 9.3 2018-01-28 4GB SD IoT' from here: https://beagleboard.org/latest-images (first one on top) I just started completely from scratch with the above base image, running from eMMC (uncommented 'init-eMMC-flasher-v3.sh' from /boot/uEnv.txt). The only thing I did was run

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-21 Thread ferdster
This is just before running the update_kernel script: loading /boot/vmlinuz-4.9.78-ti-r94 ... 9960536 bytes read in 646 ms (14.7 MiB/s) uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ... uboot_overlays: Switching

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-21 Thread ferdster
BTW, this is on a SeeedStudio Green Wireless. loading /boot/vmlinuz-4.16.0-rc2-bone3 ... 10183168 bytes read in 659 ms (14.7 MiB/s) uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-21 Thread ferdster
Now it won't boot after upgrading the kernel in step 2 (still running off eMMC): Loading, please wait... starting version 232 [3.031626] usb 1-1: new high-speed USB device number 2 using musb-hdrc [3.193198] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [3.200011] usb

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-20 Thread ferdster
boot devices ### ERROR ### Please RESET the board ### I'll re-image tomorrow and will reboot after each step, but I assume it was upgrading the bootloader in step 1. Thanks. On Tuesday, February 20, 2018 at 5:35:32 PM UTC-7, RobertCNelson wrote: > > On Tue, Feb 20, 2018 at 6:01 PM, ferdster

Re: [beagleboard] Using a device table overlay to disable the onboard RTC on the beaglebone black

2018-02-20 Thread ferdster
Hi, I'm running the "Debian 9.3 2018-01-28 4GB SD IoT" image and added a PCF8523 RTC to the i2c2 bus. Specifically, I am working with this board from Adafruit: https://www.adafruit.com/product/3295 Everything works fine manually: config-pin P9_19 i2c config-pin P9_20 i2c echo pcf8523 0x68 >

Re: [beagleboard] Enabling SPI0 on P9 header

2018-02-17 Thread ferdster
Doh, thank you! On Friday, February 16, 2018 at 5:45:28 PM UTC-7, RobertCNelson wrote: > > On Fri, Feb 16, 2018 at 5:57 PM, ferdster <ftja...@gmail.com > > wrote: > > Hi, > > > > Using "Debian 9.3 2018-01-28 4GB SD IoT" on a Seeed Studio BBGW, how d

Re: [beagleboard] Enabling SPI0 on P9 header

2018-02-17 Thread ferdster
Doh, thanks you! On Friday, February 16, 2018 at 5:45:28 PM UTC-7, RobertCNelson wrote: > > On Fri, Feb 16, 2018 at 5:57 PM, ferdster <ftja...@gmail.com > > wrote: > > Hi, > > > > Using "Debian 9.3 2018-01-28 4GB SD IoT" on a Seeed Studio BBGW, how d

[beagleboard] Enabling SPI0 on P9 header

2018-02-16 Thread ferdster
Hi, Using "Debian 9.3 2018-01-28 4GB SD IoT" on a Seeed Studio BBGW, how do I enable SPI0 on the P9 expansion header? Specifically, having trouble changing modes of P9_17 and P9_22. root@beaglebone:~/beaglebone-universal-io# ./config-pin P9_17 spi [ 9965.384388] bone-pinmux-helper

Re: [beagleboard] Removing Node-red that's listening on port 1080

2018-02-14 Thread ferdster
Thank you! On Wednesday, February 14, 2018 at 6:31:35 PM UTC-7, RobertCNelson wrote: > > On Wed, Feb 14, 2018 at 7:26 PM, ferdster <ftja...@gmail.com > > wrote: > > Hi, > > > > Using "Debian 9.3 2018-01-28 4GB SD IoT", I want to stop and remove &g

[beagleboard] Removing Node-red that's listening on port 1080

2018-02-14 Thread ferdster
Hi, Using "Debian 9.3 2018-01-28 4GB SD IoT", I want to stop and remove Node-Red that's listening on port 1080. How do I do this? I already stopped and disabled: bonescript.socket bonescript.service bonescript-autorun.service cloud9.socket cloud9.service Thanks. -- For more options, visit

Re: [beagleboard] Disable SoftAP routing

2018-02-13 Thread ferdster
That works if I only wanted SSH, but I still want to be able to access the webserver on the BB. If I add another rule for port 80, we're back to square one where it routes incoming web requests on SoftAP to wlan0. On Tuesday, February 13, 2018 at 4:15:53 PM UTC-7, RobertCNelson wrote: > > > i

Re: [beagleboard] Disable SoftAP routing

2018-02-13 Thread ferdster
If I set TETHER_ENABLED=no, then I lose the SoftAP interface completely. I still want the SoftAP, I just don't want data to be routed between the SoftAP and wlan0 (or 4G or USB eth0, etc). I am not very familiar with it, but is it something in iptables? Initially it was: debian@beaglebone:~$

[beagleboard] Disable SoftAP routing

2018-02-13 Thread ferdster
Hi, Using the latest "Debian 9.3 2018-01-28 4GB SD IoT", I'd like to disable routing between any of the interfaces. If I have wlan0 configured to connect to the internet, I don't want being connected to the SoftAP to give me internet access. I plan to install a 4G module and I definitely don't

[beagleboard] Creating my own USB .img file

2018-02-13 Thread ferdster
Hi, What is the process for creating my own USB image file that comes up when plugging in the BB to a PC/Mac? I am talking about the one stored in /var/cache/doc-beaglebone-getting-started I'd like to add my own files (manuals), change the icon file, etc. Thanks. -- For more options, visit

Re: [beagleboard] BBGW console packages?

2017-07-27 Thread ferdster
Thank you! On Thursday, July 27, 2017 at 11:43:18 AM UTC-6, RobertCNelson wrote: > > On Thu, Jul 27, 2017 at 12:06 PM, Robert Nelson <robert...@gmail.com > > wrote: > > On Thu, Jul 27, 2017 at 11:26 AM, ferdster <ftja...@gmail.com > > wrote: > >> I reme

Re: [beagleboard] BBGW console packages?

2017-07-27 Thread ferdster
I remember following these instructions a few months ago, but now when I try to apt-get install firmware-ti-connectivity, I get the no installation candidate error. I can't apt-get install bb-wl18xx-firmware since it depends on firmware-ti-connectivity. Running Ubuntu 16.04.1

[beagleboard] WAN connection manager

2017-02-28 Thread ferdster
Hi, I am fairly new to Linux and don't know what all kinds of packages exist out there. I have a custom board based on a Beaglebone Black, but in addition to the 10/100 wired 'eth0', it also has wifi 'wlan0' (WL1835MOD) and a USB 4G modem (Nimbelink) 'usb0'. Is there a 'connection manager'

Re: [beagleboard] LCD_VSYNC (GPIO2_22) going low at "Starting kernel ..."

2017-02-27 Thread ferdster
lson wrote: > > > > On Feb 27, 2017 5:21 PM, "ferdster" <ftja...@gmail.com > > wrote: > > I have a custom board running as a BBB with the build from here: > https://eewiki.net/display/linuxonarm/BeagleBone+Black > > I have commented out the whole '

[beagleboard] LCD_VSYNC (GPIO2_22) going low at "Starting kernel ..."

2017-02-27 Thread ferdster
I have a custom board running as a BBB with the build from here: https://eewiki.net/display/linuxonarm/BeagleBone+Black I have commented out the whole '_pinmux', '', and '' sections in am335x-boneblack.dts to disable hdmi. I have set LCD_VSYNC (GPIO2_22) to toggle in u-boot (board.c). I see the

[beagleboard] Re: Possible to remove eeprom?

2016-12-17 Thread ferdster
Hallo TJF, I think you are referring to the eMMC. I am talking about the small i2c eeprom that is used to identify the board. Thanks. On Saturday, December 17, 2016 at 10:15:40 AM UTC-7, TJF wrote: > > Hi ferdster, > > don't deal with any softtware! > > Am Samstag, 17. Deze

[beagleboard] Possible to remove eeprom?

2016-12-16 Thread ferdster
We have a custom board based on a BBB. It has the eeprom on it, but we'd like to get rid of it. Initially, to bring up the board, we programmed the eeprom as a BBB. Now we want to remove it. I patched it with:

[beagleboard] PWM userspace access on custom board

2016-12-02 Thread ferdster
Hi, I followed the guide by Robert here: https://eewiki.net/display/linuxonarm/BeagleBone+Black I am having trouble getting PWM userspace access (/sys/class/pwm/). I don't have a 'pwmchip0' folder. In am335x-bone-common.dtsi I added: ehrpwm2_pins: pinmux_ehrpwm2_pins { pinctrl-single,pins = <

Re: [beagleboard] Installing mysql-server on 4.4.35-bone14

2016-12-02 Thread ferdster
Thanks. I ended up deleting a bunch of others (logger, find, readlink, egrep, grep, cp). But I now have mysql, lighttpd, and php installed. On Wednesday, November 30, 2016 at 2:37:46 PM UTC-7, RobertCNelson wrote: > > On Wed, Nov 30, 2016 at 3:27 PM, ferdster <ftja...@gmail.com &

Re: [beagleboard] Moving from TI Linux to Debian on a custom board

2016-12-02 Thread ferdster
. Thanks. On Wednesday, November 23, 2016 at 3:15:04 PM UTC-7, RobertCNelson wrote: > > On Wed, Nov 23, 2016 at 3:30 PM, ferdster <ftja...@gmail.com > > wrote: > > Somewhat off-topic for a BeagleBoard forum, but I hope I can get some > help. > > > >

[beagleboard] Installing mysql-server on 4.4.35-bone14

2016-11-30 Thread ferdster
I used this guide to make the sd card: https://eewiki.net/display/linuxonarm/BeagleBone+Black When I try to 'apt-get install mysql-server' two errors come up. 1. debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend

[beagleboard] Moving from TI Linux to Debian on a custom board

2016-11-23 Thread ferdster
Somewhat off-topic for a BeagleBoard forum, but I hope I can get some help. I have a custom board (loosely based on a BeagleBone Black). With the help of the guys on TI's e2e forum, I was able to bring it up and test all the peripherals using their TI Linux SDK. This basically involved editing