And following is a link to the thread showing where we're at regarding
connecting the BB-X15 to the FT4232 Mini Module, development board:
http://beagleboard.org/discuss?place=msg%2Fbeagleboard%2FLjrZqmp8dGA%2FciOgBxRBCgAJ
On Thursday, August 2, 2018 at 9:52:08 AM UTC-5, Jeff Andich wrote:
>
>
Thanks Robert!!
Would really like to test the 485 mode in the 8250 driver, but before that,
we're going to try to get 485 mode enabled on the FTDI FT4232 USB<->serial
hub. We've ordered some FT4232 Mini Module evaluation boards for FT4232
(FT4232H chip + EEPROM + breakout pins + mini USB por
Thanks Robert!!
Would really like to test the 485 mode in the 8250 driver, but before that,
we're going to try to get 485 mode enabled on the FTDI FT4232 USB<->serial
hub. We've ordered some FT4232 Mini Module evaluation boards for FT4232
(FT4232H chip + EEPROM + breakout pins + mini USB por
On Thu, Aug 2, 2018 at 8:22 AM Jeff Andich wrote:
>
> Hi,
>
> What's the best way to find out how long a legacy driver like the omap-serial
> driver will be supported in the kernel going forward?
It's not going anywhere till they are feature matching..
>
> We've swapped out the 8250 driver for
Hi,
What's the best way to find out how long a legacy driver like the
omap-serial driver will be supported in the kernel going forward?
We've swapped out the 8250 driver for the OMAP serial driver via the
.config file, since the omap serial driver implements a 485 mode which,
thus far, appears
