How to enable power button in Beaglebone Black Rev C?
Here is my device tree from i2c and tps:
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /*
i2c0_sda.i2c0_sda */
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP |
Thanks for quick response.
Im using Busybox, but i can try build with systemd tomorrow.
Is there a quick way to overwrite power off sequence using busybox to make
it work correctly?
Working power button isn't nesesery im my case.
W dniu piątek, 22 maja 2020 03:21:06 UTC+2 użytkownik
On Thu, May 21, 2020 at 7:06 PM Szymon Kempny wrote:
>
> How to enable power button in Beaglebone Black Rev C?
> Here is my device tree from i2c and tps:
>
> i2c0_pins: pinmux_i2c0_pins {
>pinctrl-single,pins = <
>AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /*
>
>
> Hi Robert,
>
Thank you for your reply.
>
> >Use "bootz" for a raw "/boot/vmlinuz*" file instead of "bootm"..
>
> The above solution helped me and it worked.
Thank you
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed