Yep, be careful of things like 4-20 mA sensors, they often send 24V to the
output when being turned on. That’s where some capacitance across the input
pins will really help. For motor controllers or anything vaguely industrial,
it’s best to use optocouplers, I’ve had good results with VO618As. I2C devices
are pretty tame, not a lot needed for these.
-Cheers
> On 15 Nov 2022, at 5:11 PM, Chris Green wrote:
>
> Stephen Lentz wrote:
>>> On Nov 15, 2022, at 4:33 PM, Chris Green wrote:
>>>
>>> I can't find this anywhere in the System Reference Manual. What is
>>> the drive capability of the BBB output pins? Also what is the best way
>>> of buffering them so they won't get any bad voltages fed back into
>>> them?
>>>
>> 6 mA.
>>
> OK, thank you, that's loads more than I need so no problem there.
>
>
>> Voltage dividers, 5k1 resistors going into the pin, filter capacitors and
>> TVSS. Use more than one, better yet all of them. Or buy a crate of BBs
>> cause you’ll burn out a few while prototyping. Don’t ask me how I know.
>>
> :-) I've not killed any of my (3) BBBs yet. I was very careful with
> buffering on the one that is actually doing live monitoring. It's
> outputs drive the 'outside world' through some Hobbytronics level
> converters and that seems to have kept the BBB safe.
>
> I think I'll probably just use another of the level converters on the
> one more output I'm going to use.
>
> --
> Chris Green
> ·
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/rcfd4j-356k2.ln1%40esprimo.zbmc.eu.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/95904AA9-0F91-496B-90BE-774BCCEFA21B%40gmail.com.
