Hello I configured my BBBlue according to this <https://groups.google.com/forum/#!searchin/beaglebone/pru0$20bind$20failed%7Csort:date/beaglebone/plsVAbhiYxE/LZyrbbY1CAAJ>post and now i have fixed problem with PRU but.. Most of "rc_test_servos" options are finishing only with "chirping"/beeping but motors are not spining. Only one command which is starting to spin my brushless motors via ESC back and forth is
rc_test_servos -s 1 I used rc_calibrate_escs and did not help too (i heard too only chirping/beeping with calibration) . How can i test my motors? Or maybe it is normal behavior and everything looks OK? Regards holo PS Im trying to setup arducopter with BBBlue and after start of ArduPilot binnary from here <http://bbbmini.org/download/blue/ArduCopter/> and successfull connection to APM, Mission Planner is recongizing some sensors from board but i can not start motors from it too what am i doing wrong? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cdebaddd-40d8-4010-8527-0dd00af14656%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.